Всем привет.
взялся конфигурить новую 2611, но после команды wr mem увидел следубщее:
Router#
startup-config file open failed
%SYS-4-NV_BLOCK_INITFAIL: Unable to initialize the geometry of nvramВот выводы нескольких команд:
Router# dir nvram:
Directory of nvram:/%Error opening nvram:/ (Unknown error 0)
No space information available
%SYS-4-NV_BLOCK_INITFAIL: Unable to initialize the geometry of nvramПомогите плиз диагноз поставить и вылечить.
Error Message%SYS-4-NV_BLOCK_INITFAIL : Unable to initialize the geometry of nvram
Explanation The software has detected that it failed to initialize the NVRAM block geometry (a part of the NVRAM that hosts non-configuration data files). Typically, these files are used by SNMP to store and retrieve non-configuration persistent data across a system reload. This condition may occur when the entire NVRAM is packed with the configuration, and the newer version of software that supports this feature could not find enough room in the NVRAM to initialize the block file system.
Recommended Action Reduce the configurations in the NVRAM by at least 2Kb.
>Error Message
>
>%SYS-4-NV_BLOCK_INITFAIL : Unable to initialize the geometry of nvram
>
>Explanation The software has detected that it failed to
>initialize the NVRAM block geometry (a part of the NVRAM that
>hosts non-configuration data files). Typically, these files are used by SNMP
>to store and retrieve non-configuration persistent data across a system reload.
>This condition may occur when the entire NVRAM is packed with
>the configuration, and the newer version of software that supports this
>feature could not find enough room in the NVRAM to initialize
>the block file system.
>
>Recommended Action Reduce the configurations in the NVRAM by
>at least 2Kb.это я читал, но честно говоря не понял как исправить
>
>это я читал, но честно говоря не понял как исправитьпоставщик сказал памяти карачун пришел. на ремонт :(