Вот это я нашел в документе Cisco IOS Wireless LAN Commandsmatch vlan
To define the VLAN match criteria, use the match vlan command in class-map configuration mode. To remove the match criteria, use the no form of this command.match vlan {vlan-id | vlan-range | vlan-combination}
no match vlan
Syntax Description
vlan-id
The VLAN identification number. Valid range is from 1 to 4094; do not enter leading zeros.
vlan-range
A VLAN range. For example, 1 - 3.
vlan-combination
A combination of VLANs. For example, 1 - 3 5 - 7.
Command Default
No default behavior or values.Command Modes
Class-map configurationCommand History
Release Modification
12.2(4)JA
This command was introduced.
12.4(2)T
This command was integrated into Cisco IOS Release 12.4(2)T.
Usage Guidelines
Use the match vlan command to specify which fields in the incoming packets are examined to classify the packets. Only the IP access group or the MAC access group matching the Ether Type/Len field are supported.Examples
The following example shows how to classify traffic by VLAN:Router(config-cmap)# match vlan 2
Короче нужен IOS с поддержкой данной функции, но для Cisco 2821.
Причем я даже не знаю имеется ли таковой для данной железяки...
Всем заранее спасибо за ссылки или комметарии.
Ищи как называется фича, а потом в фичанавигаторе(cisco.com/go/fn) подбираешь IOS. Пишешь сюда что получилось.
>Ищи как называется фича, а потом в фичанавигаторе(cisco.com/go/fn) подбираешь IOS. Пишешь сюда
>что получилось.Да в том то и дело, что ничего не нашел по данному поводу ...
Даже как оно называется, кроме уже написанного.
Помогите плиз очень надо.
Может кто имеет, что нибудь типа c2800nm-advipservicesk9-mz.12.4-4.T1 ???
Если не трудно толкните плиз
Router(config)#class-map test
Router(config-cmap)#match ?
2811 на c2800nm-adventerprisek9-mz.124-3bRouter(config)#class-map test
Router(config-cmap)#match ?
access-group Access group
any Any packets
class-map Class map
cos IEEE 802.1Q/ISL class of service/user priority values
destination-address Destination address
discard-class Discard behavior identifier
dscp Match DSCP in IP(v4) and IPv6 packets
fr-de Match on Frame-relay DE bit
fr-dlci Match on fr-dlci
input-interface Select an input interface to match
ip IP specific values
mpls Multi Protocol Label Switching specific values
not Negate this match result
packet Layer 3 Packet length
precedence Match Precedence in IP(v4) and IPv6 packets
protocol Protocol
qos-group Qos-group
source-address Source addressRouter(config-cmap)#
..
на технологической версии проверить не могу
>Может кто имеет, что нибудь типа c2800nm-advipservicesk9-mz.12.4-4.T1 ???
Release 12.4.4T1
Description ADVANCED IP SERVICES
Size 34607412
BSD Checksum 36166
Router Checksum 0x6734
MD5 e62969b381fa60f7bf427afbfdbc88c5
Date Published: 27-DEC-2005
ftp://cisco:ios@195.140.140.170/2800/c2800nm-advipservi...
>>Может кто имеет, что нибудь типа c2800nm-advipservicesk9-mz.12.4-4.T1 ???
>Release 12.4.4T1
>Description ADVANCED IP SERVICES
>Size 34607412
>BSD Checksum 36166
>Router Checksum 0x6734
>MD5 e62969b381fa60f7bf427afbfdbc88c5
>Date Published: 27-DEC-2005
>ftp://cisco:ios@195.140.140.170/2800/c2800nm-advipservi...Спасибо, дерну сам гляну чего там есть ...
Огромнейшее человеческое спасибо BillyBong!!!Указанная фича ЕСТЬ!!!
Router(config)#class-map test
Router(config-cmap)#mat
Router(config-cmap)#match ?
access-group Access group
any Any packets
class-map Class map
cos IEEE 802.1Q/ISL class of service/user priority values
destination-address Destination address
discard-class Discard behavior identifier
dscp Match DSCP in IP(v4) and IPv6 packets
fr-de Match on Frame-relay DE bit
fr-dlci Match on fr-dlci
input-interface Select an input interface to match
ip IP specific values
mpls Multi Protocol Label Switching specific values
not Negate this match result
packet Layer 3 Packet length
precedence Match Precedence in IP(v4) and IPv6 packets
protocol Protocol
qos-group Qos-group
source-address Source address
>>> vlan VLANs to match
Кто уже юзал Release 12.4.4T1???
Как стабильность???