The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Поиск:  Каталог документации | perl

comp.lang.perl.tk FAQ part2 of 5


Summary: comp.lang.perl.tk Frequently Asked Questions.
Archive-name: perl-faq/ptk-faq/part2
Posting-Frequency: monthly
Last-modified: Date: Sat May 31 16:48:37 1997
URL: http://w4.lns.cornell.edu/~pvhp/ptk/ptkFAQ.html
Version: 1.00_07

URL (Hypertext-split): http://w4.lns.cornell.edu/~pvhp/ptk/ptkTOC.html
URL (Plaintext): http://w4.lns.cornell.edu/~pvhp/ptk/ptkFAQ.txt
Image-supplement: http://w4.lns.cornell.edu/~pvhp/ptk/ptkIMG.html
ftp-Archive: ftp://ftp.ccd.bnl.gov/pub/ptk/ptkFAQ.txt
ftp-Archive: ftp://rtfm.mit.edu/pub/usenet/perl-faq/ptk-faq/
e-mail-Archive: [email protected]

Perl/Tk FAQ part 2 of 5 - Programming      
************************************* 



 ______________________________________________________________________
 
 
 
 10. How do I get widget X to do Y ? 
 
 There are a number of tasks that can be accomplished with perl/Tk widgets,
 configurations, and bindings (a few that can't and a few that require specific
 tricks). Beginners are encouraged to work through the examples in 
 UserGuide.pod. Some examples from UserGuide.pod are addressed in
 this document among those that follow. 
 
 Basically a widget can be "created" by simply calling the sub of the same name:
 
     my $main = new MainWindow;
 
 will set aside the necessary system memory etc. for a new MainWindow widget
 (it does not appear until after the MainLoop; call). The object "created" is
 then callable via the variable $main. So, for example, if you wanted a Button
 in your MainWindow, then this: 
 
     $main->Button();
 
 would be a very basic example of a widget command. If you wanted to later call
 this button widget you would need a "widget tag or ID" to "get a handle on it".
 Instead of the above call try something like: 
 
     my $button = $main->Button();
 
 The variable $button is how you refer to the Button widget in subsequent
 calls, such as when we call the pack routine: 
 
     $button -> pack;
 
 A complete script that incorporates these ideas to make a very plain button
 would look like: 
 
     #!/usr/bin/perl -w
     use Tk;
     use strict;
     my $main = new MainWindow;
     my $button = $main -> Button();
     $button -> pack;
     MainLoop; 
 
 But who wants such a plain looking button? You can provide a number of
 different widget configurations via calls to the configure routine as in: 
 
     #!/usr/bin/perl -w
     use Tk;
     use strict;
     my $main = new MainWindow;
     my $button = $main->Button();
     $button -> configure(-text => 'Press me!');
     $button -> pack;
     MainLoop; 
 
 The Perl motto is "there is more than one way to do it." - perl/Tk remains
 quite true to this motto as well. Note that the above script could have been
 written quite succinctly without the use of either the $main or $button
 variables as: 
 
     #!/usr/bin/perl -w
     use Tk;
     use strict;
     new MainWindow -> Button(-text => 'Press me!') -> pack;
     MainLoop; 
 
 But if you want your widgets to actually do things then you must set up
 callback procedures as discussed later... 
 
 Do not overlook the - sign in front of some options (like -text in the above
 example) Another commonly overlooked problem is that elements in a hash
 are supposed to be strings hence a configuration option like -length +> 5,
 really ought to be specified as either '-length' +> 5, or "-length" +>
 5, etc., rather than perl's builtin length() function. 
 
 ______________________________________________________________________
 
 
 
 10.1. How do I get a Button to call a Perl subroutine? 
 
 You may specify the -command option in the call to create & pack the button
 as in: 
 
     $main->Button(-text => 'Print',
                    -command => sub{do_print($filename, $font)}
                    )->pack;
 
 Where sub do_print { } is a subroutine that handles two arguments and
 is declared elsewhere in the script. A full script example of the use of the
 above code is presented in the second example(s) in UserGuide.pod 
 
 (Full source code for this and other examples from UserGuide.pod may be
 found at http://w4.lns.cornell.edu/~pvhp/ptk/pod/. To load code from the web
 save as a local file say ex1.pl, edit the first line to point to your perl
 interpreter, then change permission: %chmod u+x ex1.pl, then execute the
 script: %ex1.pl.) 
 
 The above method is called the "anonymous subroutine (closure)" method.
 As discussed in Callback.pod one might have re-written that statement to
 use the "reference to a sub" method thusly: 
 
     $main->Button(-text => 'Print',
                    -command => [ \&do_print , $filename, $font ]
                    )->pack;
 
 Note the backslash in front of \&do_print. This causes perl to generate a
 reference to sub do_print rather than call it. (thanks Jim Stern :-) 
 
 ______________________________________________________________________
 
 
 
 10.2. How do I get a Button to actively change under my mouse pointer? 
 
 You should specify both an '-image' and an '-activeimage'
 configuration option either when calling the ->Button() method or in a
 later separate call to the ->configure() method. 
 
 Here is an example excerpted from the basic_demo script that comes with
 the Tk kit: 
 
     #!/usr/local/bin/perl -w
     
     use Tk;
     
     $main = MainWindow->new;
     
     $QPBFile  = "demos/images/QuitPB.xpm";
     $QPBaFile = "demos/images/QuitPBa.xpm";
     
     $QuitPB  = $main->Pixmap('-file' => Tk->findINC("$QPBFile"));
     $QuitPBa = $main->Pixmap('-file' => Tk->findINC("$QPBaFile"));
     
     my $but  = $main->Button('-image'       => $QuitPB,
                              '-activeimage' => $QuitPBa,
                              '-command'     => sub { $main->destroy }
                             ) -> pack;
     
     MainLoop;
     
     __END__
     
 
 ______________________________________________________________________
 
 
 
 10.3. How do I arrange the layout of my widgets? 
 
 To control the layout and appearance of widgets in a window one makes use of
 a geometry manager, as well as -padding, -fill, -expand, and -anchor options
 of individual widgets. 
 
 A geometry manager is any Tk procedure for controlling the arrangement of
 widgets in your application window. The predominant geometry manager used
 in both Tcl/Tk and perl/Tk is pack also known informally as the "packer"
 (other geometry managers are the "placer" and the canvas widget itself but
 are much less popular. There is also Nick Ing-Simmon's Table widget
 [discussed in a later question] and BLT_Table [which made it's way into
 perl/Tk thanks to Guy Decoux - but is also discussed in a later question]. So
 far tixForm is for Tcl/Tk only, but a perl/Tk version of Tix is in the works.
 You can invoke pack at the time of widget creation via calls like: 
 
     $widget->pack;
 
 where widget can be any of the perl/Tk widget primitives. Widget option lists
 are usually passed as an associative array (hash) in parentheses thusly: 
 
     $widget(-option0 => value0,-option1 => value1)->pack;
 
 pack is often used in conjunction with the frame container widget to arrange
 your widgets much like a hiearchically arranged set of window panes
 (ultimately in a rectangular "tiling" fashion of sorts). An example of this
 would be: 
 
     my $top2 = $main->Toplevel;
     my $frame = $top2->Frame;
     $frame->pack;
     $frame->Label(-text => 'Left2')->pack(-side => 'left');
     $frame->Label(-text => 'Right2')->pack(-side => 'right');
     $top2->Label(-text => 'Bottom2')->pack(-side => 'bottom');
     MainLoop;
 
 Note that pack itself is given parameters in this example. The default
 behavior for pack is equivalent to specifying -side => 'top' which can be
 overridden as in the above example. 
 
 (Full source code for this and other examples from UserGuide.pod may be
 found at http://w4.lns.cornell.edu/~pvhp/ptk/pod/. To load code from the web
 save as a local file say ex2.pl, edit the first line to point to your perl
 interpreter, change permission using: chmod u+x ex2.pl, then type the
 name of your script: ex2.pl.) 
 
 One of the more helpful options to pass to pack when trying to get a given
 widget layout "just right" is through padding: either -padx or -pady. The
 details of the use of pad depend on which specific widget you are trying to 
 pack. In fact you can often add the -pad in the call to create the widget rather
 than in the call to pack. 
 
 There is also the -anchor configuration option for widgets. A good
 introduction to the 9 possible -anchor (and -overanchor) values is given
 by the popup demo in your perl/Tk build directory. 
 
 When setting a widget within a frame next to another widget one may wish to
 make use of the -fill => 'style' (where style = none | x | y | both)
 options of either pack or the widget itself. A typical situation where this is
 used is in setting up the Scrollbar next to a Canvas or Text widget. 
 
 Another aspect to consider when laying out your widgets is their behavior
 under resize operations (grabbing a part of the window frame and making it
 bigger or smaller - details depend on your window manager). This may be
 controlled by the -expand option of either pack or the widget itself. 
 
 ______________________________________________________________________
 
 
 
 10.4. How do I get a Popup to popup? 
 
 For things like a simple "are you sure?" dialog box you might want to take a
 look at Dialog.pm which is discussed in a later question within this FAQ
 [16.1]. 
 
 If you don't wish to require Tk::Dialog, you need something more complicated,
 or you simply want to create your own independent window with widgets; you
 must first setup a Toplevel in perl/Tk. The fourth example in UserGuide.pod
 gives a simple example of how to call Toplevel. Quoting from that script: 
 
     my $main = new MainWindow;
     fill_window($main, 'Main');
     my $top1 = $main->Toplevel;
 
 Where sub fill_window is declared after the call to MainLoop;. When
 running that script take careful note of which window pops up first, which
 window has grabbed the active attention of your input device(s), and which
 widget within the active window has the keyboard/mouse focus when all three
 windows are open. 
 
 The use of Toplevels brings up the issue of grab - or which independent
 window is presently "active" and which are activatable. To make a Toplevel
 window active call grab thusly: 
 
     $Top_widget->grab(grab_option);
 
 where $Top_widget identifies the desired Toplevel (it would be either 
 $top1 or $top2 in the sample script referred to above). grab_option
 could be -global - but this is discouraged as a sign of "desparate
 programming style". To give a Toplevel "local grab" you may simply say: 
 
     $Top_widget->grab;
 
 That is, without an argument. 
 
 The use of Toplevels may also bring up the issue of focus - or which window
 - even which widget within a window - is presently "hot". You may call 
 focus on an entire Toplevel: 
 
     $Top_widget->focus;
 
 However, focus is most often used with individual widgets rather than a
 whole Toplevel. 
 
 To de-iconify a widget there is in fact a Popup function that may be called
 thusly: 
 
     $Top_widget->Popup();
 
 ______________________________________________________________________
 
 
 
 10.5. How do I bind keyboard keys? 
 
 There are many default key bindings built in to the widgets of perl/Tk. Making
 proper use of them often involves setting up the right callback. (You may wish
 to consult the examples in BindTable.pod for help with this subject.) 
 
 The basic idea is: 
 
     $widget -> bind('<keyname>' => action);
 
 Where $widget is the tag or ID of the widget for which the bindings are to
 hold (note for global bindings you have to bind to <All>, for semi-global
 bindings you need to bind to all the relevant widgets in your application), '<
 keyname>' can be things like: 
 
     <Key> or <KeyPress> or <Any-KeyPress>
     <KeyRelease>
     <Button> or <ButtonPress>
     <ButtonRelease>
     <Button-1> or <B1> 
     <Double-1>
     <Enter>
     <Leave>
     <Motion>
 
 To figure out what names perl/Tk uses for such <bindings> use the
 "binder-finder" on a widget's .pm file. For example, you could find bindings
 hidden inside of Button.pm by typing this at your shell prompt: 
 
     perl -ne 'print if s/.*(<[^>]*>).*/$1/g;' Button.pm
 
 while in the directory where Button.pm is located (and if you are not there
 then simply specify the /path/to/Button.pm). Note that due to
 inheritance (e.g.the type of script bindings that are being discussed here) what
 the binder-finder turns up may not be the last word on a given widget's
 behaviour. This may be especially true for a widget inside of a
 compound/composite widget. Note also that the binder-finder will turn up
 things like <FILEHANDLES> as well as honest <Bindings>. Discrimination
 in its use is called for (and while your at it you could have just as easily used an
 editor and actually examined the code directly now couldn't you?). 
 
 To get an idea of what the code is for a key that you are interested in try
 running the xlib_demo that comes in your perl/Tk build directory. Hold your
 mouse pointer over the window that appears and simply type the key that you
 are interested in. The code should appear in the window. If you do not have
 perl/Tk up and running yet try "xmodmap -pk" or look directly at the 
 /usr/include/X11/keysymdef.h file where keysym names are given with
 an XK_ pre-pended. Do not try things like the Tcl/Tk %k symbols in perl
 scripts. %Ks will be mis-interpreted as non-existant perl hashes. Instead look
 at the Xevent function. 
 
 Ali Corbin <[email protected]> recently posted a great little
 script for determining keyboard key bindings on a MainWindow: 
 
     #!/usr/local/bin/perl -w
     use Tk;
     $top = MainWindow->new();
     $frame = $top->Frame( -height => '6c', -width => '6c',
                             -background => 'black', -cursor => 'gobbler' );
     $frame->pack;
     $top->bind( '<Any-KeyPress>' => sub
     {
         my($c) = @_;
         my $e = $c->XEvent;
         my( $x, $y, $W, $K, $A ) = ( $e->x, $e->y, $e->K, $e->W, $e->A );
 
         print "A key was pressed:\n";
         print "  x = $x\n";
         print "  y = $y\n";
         print "  W = $K\n";
         print "  K = $W\n";
         print "  A = $A\n";
     } );
     MainLoop();
 
 To bind the action of one widget to that of another try taking a look at the
 .pm file for the widget of interest - is there a binding function already
 defined? If so you may use it. An example would be the use of "Up" & "Down" 
 Buttons for a Listbox: one could bind the Buttons to call 
 Tk::Listbox::UpDown, however, Guy Decoux describes a much more
 clever way to use the <Up> and <Down> already defined in Listbox.pm (this
 does not work with Tk-b9.01): 
 
     #!/usr/local/bin/perl
     use Tk;
     $top = MainWindow->new;
     $lb = $top->Listbox(-height => 10);
     for($i=0; $i < 120; $i++) {
       $lb->insert('end', $i);
     }
     $f = $top->Frame;
     $up = $f->Button(
            -text => "Up",
            -command => [ $lb->bind(ref $lb, '<Up>'), $lb]
            );
     $down = $f->Button(
              -text => "Down",
              -command =>sub {&{$lb->bind(ref $lb, '<Down>')}($lb)}
              );
     $up->pack(-side => 'left');
     $down->pack;
     $f->pack;
     $lb->pack;
     MainLoop;
 
 ______________________________________________________________________
 
 
 
 10.6. How do I add bindings? 
 
 On Fri, 15 Sep 95 10:30:56 BST Nick Ing-Simmons
 <[email protected]> writes: 
 
 
 Re: Multiple binds to a single widget?
 **************************************
 
 On Thu, 14 Sep 1995 14:57:54 -0400
 Alain St <[email protected]> writes:
 !In the tcl/tk doc I have, they say that prepending the script 
 !with '+' appends the new binding to the current one.
 !
 !How do I do that in perlTk? 
 !
 
  You cannot do that that way (yet?) - one issue is what it would mean to
  prepend '+' to a perl/Tk callback : 
 
     $widget->bind('<A>','+',[\&subname,$arg]); 
     # did not look right to me
 
  Other issue is that I would need to manage a list-of-callbacks in glue
  code. 
 
  Bind your new command to a new tag: 
 
     $widget->bind('Extra',....);
 
  And add Extra to the widgets bindtags: 
 
     $widget->bindtags([ref($widget),$widget,'Extra',
                         $widget->toplevel,'all']);
 
 ______________________________________________________________________
 
 
 
 10.7. How do I bind the action of a slider (sic) to ... ? 
 
 Technically speaking they are called Scrollbars (not sliders) and one must 
 configure the action of the desired widget to call the Scrollbars (i.e. bind
 is not involved here) 
 
 A common task using Scrollbars is to configure things like Canvas, 
 Listbox, or a Text widgets to be updated (change appearance) when the
 slider of the acompanying Scrollbar is moved by the user. 
 
 As an example consider the code that sets up a twelve element Listbox and
 an accompanying vertical Scrollbar: 
 
     my $main = new MainWindow;
     my $box = $main->Listbox(-relief => 'sunken', 
                              -width => -1, # Shrink to fit
                              -height => 5,
                              -setgrid => 'yes');
     my @items = qw(One Two Three Four Five Six Seven
                    Eight Nine Ten Eleven Twelve);
     foreach (@items) {
        $box->insert('end', $_);
     }
     my $scroll = $main->Scrollbar(-command => ['yview', $box]);
 
 So far so good. But merely setting them up does not mean that the Listbox
 even knows that the Scrollbar is lying next to it. Note that the scalar
 variable $scroll is how we refer to the Scrollbar, thus, hooking the $box
 up to handle $scroll events is a matter of configuration: 
 
  
     $box->configure(-yscrollcommand => ['set', $scroll]);
 
 A complete script that makes use of this code (and adds the necessary calls to 
 pack and MainLoop;) is given as the fifth example in UserGuide.pod (and
 may be found at http://w4.lns.cornell.edu/~pvhp/ptk/pod/.) 
 
 There was an old Perl/Tk tendency to have a bunch of ScrlFoo widgets (such
 as ScrlListbox). The use of such widgets is now deprecated in favor of a
 new Scrolled class, as in: 
 
     $w = $patent->Scrolled('Text',...);
 
 The widgets that can be ->Scrolled() include: 
 
  o Canvas (::Axis) 
  o Entry 
  o Ghostview 
  o HList 
  o HTML (::Web) 
  o Listbox 
  o Pod 
  o Text (::ROText) (::TextUndo) 
  o Tiler 
 
 ______________________________________________________________________
 
 
 
 10.8. How do I configure a Scrollbar to scroll multiple widgets? 
 
 Note that the widget type that you wish to scroll can be important as a scroll
 "unit" on a Text or Listbox may be a character (several pixels - depending
 on font) whereas it would be an X "units" on a Canvas (could be pixel - but
 you may also specify other units). 
 
 A concrete answer for scrolling 3 Listboxes comes courtesy of Frederick L.
 Wagner <[email protected]>: 
 
  From a working example of multi-xscrolling: 
 
     sub multiscrollx
     {  # multiscrollx
      my ($sb,$wigs,@args) = @ARG;
      my $w;
      foreach $w (@$wigs)
      {
        $w->xview(@args);
      }
     }  # multiscrollx
  
     # %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  
       $sh->configure( -command => [ \&multiscrollx, $sh,
                          [$scratchrule,$ruleheader,$ruletable]]);
       $ruletable->configure(  -xscrollcommand => [ 'set', $sh]);
       $ruleheader->configure( -xscrollcommand => [ 'set', $sh]);
       $scratchrule->configure(-xscrollcommand => [ 'set', $sh]);
 
  In this case,
  $sh is a horizontal Scrollbar,
  $ruletable and $scratchrule are Tables
  $ruleheader is an Entry
 
  However, this approach is good for any widget with X-scrolling
  capability, I think. So the Y counterpart should be: 
 
     sub multiscrolly
     {  # multiscrolly
      my ($sb,$wigs,@args) = @ARG;
      my $w;
      foreach $w (@$wigs)
      {
        $w->yview(@args);
      }
     }  # multiscrolly
  
     # %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  
       $sv->configure( -command => [ \&multiscrolly, $sv,
                                     [$l1,$l2,$l3]]);
       $l1->configure( -yscrollcommand => [ 'set', $sv]);
       $l2->configure( -yscrollcommand => [ 'set', $sv]);
       $l3->configure( -yscrollcommand => [ 'set', $sv]);
 
  Hope that helps. 
 
 Greg VanSickle <[email protected]> points out that this little script snippet
 does not provide for the binding of '<Button-2<' that he is accustomed to.
 He wrote a package called DSListbox to address this binding issue. 
 
 Conversely, Jong Park asked how to setup multiple Scrollbars to scroll the
 same widget. Nick Ing-Simmon's reply makes use of an anonymous sub and
 can be summed up in a little script that scrolls a Text widget (to see the
 scrolling in action type more than 20 lines of text into the widget):
 
     #!/usr/local/bin/perl -w
     
     use Tk;
     my $mw = MainWindow->new();
     
     my $s1 = $mw->Scrollbar(-orient => 'vertical');
     my $s2 = $mw->Scrollbar(-orient => 'vertical');
     
     $s1->pack(-side => 'left', -fill => 'y');
     my $t = $mw->Text(
         -yscrollcommand =>  sub{$s1->set(@_), $s2->set(@_)},
         -wrap           => 'word',
         -width          => 70,
         -height         => 20, 
         -font           => $font,
         -setgrid        => 1,
     )->pack(-side => 'left');
     $s2->pack(-side => 'right', -fill => 'y');
     $s1->configure(-command => [$t => 'yview']);
     $s2->configure(-command => [$t => 'yview']);
     
     MainLoop;
     
     __END__
 
 ______________________________________________________________________
 
 
 
 10.9. How do I display a bitmap? 
 
 You can display X bitmaps on your widgets with the -bitmap configuration
 option. Typically -bitmaps are configured into Label, Frame, Button, etc.
 widgets (Canvas widgets are another story however see question [11.1] below).
 In order to emphasize the bitmap option itself let us assume we were
 specifying a bitmap for a Label with a call like: 
 
     $main->Label(-bitmap => 'bitmap-name')->pack;
 
 Where bitmap-name could be any of the built in Tk bitmaps: error, 
 gray25, gray50, hourglass, info, question, questhead, warning (see
 the widget demo for a full list). 
 
 In order to use some of the bitmaps in the perl5/Tk/demos/images/
 directory you would specify a fuller path name like: 
 
     $main->Label(-bitmap => "\@$tk_library/demos/images/face")->pack;
 
 Note the escaped "\@" on the directory specification (as well as the use of the 
 $tk_library variable imported by use Tk;). If you wanted to specify a file
 called foobar.xbm in the directory where you were running the script then
 either: 
 
     $main->Label(-bitmap => '@foobar.xbm')->pack;
 #or
     $main->Label(-bitmap => "\@foobar.xbm")->pack;
 
 should work just fine. In another directory however that would be a problem.
 So something like: 
 
     $main->Label(-bitmap => "\@$ENV{'HOME'}/img/foobar.xbm")->pack;
 
 will help someone who has an img/foobar.xbm file in their $HOME
 directory. If you don't mind the non-portability then hard-wiring in the full
 path name will help as well. (Or if you have write access then put your files in 
 Tk/demos/images/ e.g.) 
 
 ______________________________________________________________________
 
 
 
 10.10. How do I display an image? 
 
 You will want to get a "Photo" handle on the file as in the following example
 where 'imggif' is the Photo handle for a gif file that is distributed with
 perl/Tk: 
 
     #!/usr/bin/perl -w
     use strict;
     use Tk;
     my $main = new MainWindow;
 
     $main ->Label(-text => 'Main')->pack;
     $main -> Photo('imggif', 
                    -file => "$Tk::tk_library/demos/images/earth.gif");
     my $l = $main->Label('-image' => 'imggif')->pack;
 
     $main->Button(-text => 'close',
                   -command => sub{destroy $main}
                   )->pack(-side => 'left');
     $main->Button(-text => 'exit',
                   -command => [sub{exit}]
                   )->pack(-side => 'right');
     MainLoop;
 
 (Canvas widgets are another story however see question a later question
 within this FAQ). 
 
 ______________________________________________________________________
 
 
 
 10.11. What Image types are available? 
 
 In addition to the Tk builtin bitmaps there is support for reading images
 from files in formats such as: X11 Bitmaps (.xbm), X Pixmaps (.xpm), and
 Graphics Inline Format (.gif). See the CrtPhImgFmt man page for more info
 (if you have Tk 4.X installed). (In order to support other formats you might
 also consider running through a netpbm filter.) 
 
 For perl generation of images see the question (later in this FAQ) on graphics
 modules. 
 
 ______________________________________________________________________
 
 
 
 10.12. Is there any way to have more than one Listbox contain a selection? 
 
 To allow more than one Listbox to contain a "selection", (or at least a
 highlighted item - which need not be the actual selection) specify the
 configuration option: 
 
     -exportselection => 0
 
 which will dis-associate Listbox's selection from X selection (only one
 window can have X selection at a time). 
 
 Here is a rather simple script that illustrates what happens when only one 
 Listbox has -exportselection => 0 specified: 
 
     #!/usr/bin/perl -w
     
     use Tk;
     
     my $main = MainWindow->new;
     
     my @fruits = ('Apple','Banana','Cherry','Date','Elderberry','Fig');
     my @nuts   = qw(Almond Brazil Chestnut Doughnut Elmnut Filbert);
     
     my $fruit_list = $main->Listbox();
     for (@fruits) { $fruit_list -> insert('end',$_); }
     $fruit_list->pack();
     my $fruitprint_button = $main->Button(
                               -text => "print selection",
                               -command => sub{ printthem($fruit_list) }
                                           )->pack;
     
     my $nut_list = $main->Listbox(
                                   -selectmode => 'multiple',
                                   -exportselection => 0,
                                  )->pack;
     for (@nuts) { $nut_list -> insert('end',$_); }
     my $nutprint_button = $main->Button(
                               -text => "print selection(s)",
                               -command => sub{ printthem($nut_list) }
                                           )->pack;
     
     my $quit_button = $main->Button(-text => "quit program", 
                                     -command => sub{exit},
                                     )->pack();
     
     MainLoop;
     
     sub printthem {
         my $list = shift;
         my @entries = $list->curselection;
         for (@entries) { print $list -> get($_),"\n";}
     }
 
 For a more extensive example of Listbox usage combined with some perl
 data structure exploitation see the script at: 
 
     http://w4.lns.cornell.edu/~pvhp/ptk/etc/lb-constructor
 
 ______________________________________________________________________
 
 
 
 10.13. How do I select a range of tags in a Text widget? 
 
 A question arose concerning getting a range of selections from a Text widget. 
 Nick Ing-Simmons' answer mentions several possibilities including: 
 
  Keyboard Copy/Paste 'is' implemented of course... 
 
 
 Subj:   RE: $Text->tag('ranges', 'sel') - does this work?
 
 In <[email protected]>
 On Fri, 29 Dec 1995 14:57:42 -0500
 Charles J Williams <[email protected]> writes:
 !I was writing a little tk perl today, and i decided to try to 
 !implement a copy/paste using the 'sel' tag
 !
 !I enabled exportselection, and then try to probe the select 
 !region with:
 !
 !    $buffer = $text->tag('ranges', 'sel');
 !
 !$buffer comes back with one entry, the end of the selection.
 
  That is to be expected - the scalar gets assigned the last element of the
  list. 
 
 
 !I tried:
 !
 !    @buffer = $text->tag('ranges', 'sel');
 !
 !same difference.
 
  This seems to work for me: 
 
     ($start,$end) = $text->tagRanges('sel');
 
  In perl/Tk ->tagRanges(...) is an alias for ->tag('ranges',...) 
 
  The following subroutine can also probe and print the tagRanges: 
 
     sub showsel  
     { 
      my $text = @_;
      my @info = $text->tagRanges('sel');
      if (@info)
       {
        print "start=$info[0] end=$info[1]\n" 
       }
     }
 
 ______________________________________________________________________
 
 
 
 10.14. How do I group Radiobuttons together? 
 
 Specify the -variable option on each one. Here is an example pulled from
 the icon.pl demo script: 
 
      $letters = '';
      my $w_frame_left_b3 = $w_frame_left->Radiobutton(
          -bitmap   => "\@$tk_library/demos/images/letters",
          -variable => \$letters,
          -value    => 'full',
      );
      my $w_frame_left_b4 = $w_frame_left->Radiobutton(
          -bitmap   => "\@$tk_library/demos/images/noletters",
          -variable => \$letters,
          -value    => 'empty',
      );
 
 ______________________________________________________________________
 
 
 
 10.15. How do I specify fonts? 
 
 The quick answer is to specify the font configuration option of your widget as
 in: 
 
     #!/usr/local/bin/perl -w
     use Tk;
     $main = MainWindow->new();
     $labl = $main -> Label('-text' => "Foo", '-font' => "fixed");
     $labl -> pack;
     MainLoop;
 
 The long answer involves figuring out what fonts you have access to locally.
 The Unix programs xlsfonts and xfontsel are useful in this regard. 
 
 The perl/Tk version of xfontsel was distributed as the font_test script in the
 Tk build directory. 
 
 See also the later question (within this FAQ) on international fonts. 
 
 ______________________________________________________________________
 
 
 
 10.16. How do I get the entry in an Entry? 
 
 You want to call get on the return value of the widget itself. Here is how it
 may be used in a simplified version of example 1.1 from the Tk::UserGuide
 where a Button is set up to call a sub where the call to get lies: 
 
     #!/usr/bin/perl -w
     use strict;
     use Tk;
 
     my $main = MainWindow -> new();
     my $entry = $main -> Entry();
     $entry -> pack;
     $main->Button(-text => 'Print', 
                   -command => sub{do_print($entry)}
                   )->pack;
     MainLoop;
 
     sub do_print {
         my ($widget) = @_;
         my $entered = $widget -> get();
         print "The string \"$entered\" was entered.\n";
     }
 
 ______________________________________________________________________
 
 
 
 10.17. How do I hide a password Entry? 
 
 Set the -show option to zero, as in this example: 
 
     $entry = $form->Entry(-textvariable => \$user_entry, 
                           -show => 0);
 
 ______________________________________________________________________
 
 
 
 10.18. How do I limit an Entry's insertion width? 
 
 Nick Ing-Simmons recommends writing a new Entry widget with the 
 insert method appropriately overridden by one that does limit the width. His
 code is avaialable as a separate package from: 
 
     http://w4.lns.cornell.edu/~pvhp/ptk/etc/LEntry-0_00.tar.gz
 
 Now Brent Powers points out a possible problem with that approach and
 recommends an insert() method as follows: 
 
     Date: Thu, 22 Aug 1996 10:32:44 -0400
     From: "Brent B. Powers" <[email protected]>
     Subject: Re: How to set max characters for Entry widget
     In-reply-to: <199608211445.PAA09248@pluto>
     
     Ummm, before we set this into the distribution or FAQ, maybe we should
     make it work properly.  An example:  Imagine maxwidth configured to 8,
     the user fills in ABCDEFGH, moves the cursor back 4 places, and types
     I.  The SUPER::insert call sets the string to ABCDIEFGH, which this
     code then modifies to ABCDIEFG.
     
     Hmmm, how about
     
     sub insert {
       my($w, @args) = @_;
       my($max) = $w->cget(-maxwidth);
       my($sval) = $w->get;
       if (length($sval) >= $max) {
          $w->SUPER::insert(@args);
          if (length($w->get) > length($sval) {
         ## Reject it;
         my($idx) = $w->index('insert'); #  get current cursor position
             $w->delete(0, 'end');
             $w->insert(0, $sval);
             $w->icursor($idx);
         $w->bell;
       } else {
          $w->SUPER::insert(@args);
       }
     }
     
     Of course, that still doesn't deal with the selection, but ... 
 
 To which Nick Ing-Simmons responded (Thu Aug 22 1996): 
 
     'paste' and <ButtonRelease-2> call insert method, what other selection
     issues are there?
 
 ______________________________________________________________________
 
 
 
 10.19. How do I obtain Menus that do not tear off? 
 
 Nick Ing-Simmons outlined a couple of ways to achieve this result. The
 critical feature being the -tearoff => 0 configuration option of the Menu.
 In Nick's words: 
 
     my $mb = $parent->Menubutton(...);    # The button
     my $menu = $mb->Menu(-tearoff => 0);  # Create a non-tearoff menu
     $mb->configure(-menu => $menu);       # Tell button to use it.
     $mb->command(....);
 
  Above is for clarity - you can loose $menu variable: 
 
     my $mb = $parent->Menubutton(...);  
     $mb->configure(-menu => $mb->Menu(-tearoff => 0));  
     $mb->command(....);
 



Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру