Помогите с проблемкой!
Стоит hylafax c Slackware 8.1, стоит и роде бы работет но вот беда какая. Пытаюсь отослать на факс 3 страницы. Все вроде бы ок но только формируется при приеме только 1 tif файл, по почте получаю:recvq/fax00008.tif (ftp://hylafax:4559/recvq/fax00008.tif):
Sender:
Pages: 3
Quality: Normal
Page: ISO A4
Received: 2003:03:25 09:50:49
TimeToRecv: 0:55
SignalRate: 14400 bit/s
DataFormat: 1-D MR
ReceivedOn: ttyS0
CommID: c00000009 (ftp://hylafax:4559/log/c00000009)только один вложенный файл. Смотрю через обычный редактор, например Photoshop только одна страница. Log показывает что принялись все 3 но файл формируется только 1, так вот не поможет ли кто как мне заставить HylaFax разделять принимаемые факсы по формату А4.
пример лога прилагаю
.Mar 25 09:50:43.85: [ 161]: REMOTE wants 3.85 line/mm
Mar 25 09:50:43.85: [ 161]: REMOTE wants 1-D MR
Mar 25 09:50:43.94: [ 161]: --> [2:OK]
Mar 25 09:50:43.94: [ 161]: <-- [7:AT+FDR\r]
Mar 25 09:50:47.36: [ 161]: --> [20:+FCS:0,5,0,2,0,0,0,3]
Mar 25 09:50:47.36: [ 161]: REMOTE wants 14400 bit/s
Mar 25 09:50:47.36: [ 161]: REMOTE wants page width 1728 pixels in 215 mm
Mar 25 09:50:47.36: [ 161]: REMOTE wants unlimited page length
Mar 25 09:50:47.36: [ 161]: REMOTE wants 3.85 line/mm
Mar 25 09:50:47.36: [ 161]: REMOTE wants 1-D MR
Mar 25 09:50:49.22: [ 161]: --> [7:CONNECT]
Mar 25 09:50:49.22: [ 161]: RECV: begin page
Mar 25 09:50:49.22: [ 161]: RECV: send trigger 022
Mar 25 09:50:49.22: [ 161]: <-- data [1]
Mar 25 09:51:03.73: [ 161]: RECV: 1136 total lines, 0 bad lines, 0 consecutive bad lines
Mar 25 09:51:03.89: [ 161]: --> [17:+FPS:1,1142,0,0,0]
Mar 25 09:51:05.12: [ 161]: --> [6:+FET:0]
Mar 25 09:51:05.12: [ 161]: RECV recv MPS (more pages, same document)
Mar 25 09:51:05.12: [ 161]: --> [2:OK]
Mar 25 09:51:05.12: [ 161]: RECV send MCF (message confirmation)
Mar 25 09:51:05.13: [ 161]: RECV FAX (00000009): from <UNSPECIFIED>, page 1 in 0:22, INF, 3.85 line/mm, 1-D MR, 14400 bit/s
Mar 25 09:51:05.13: [ 161]: <-- [7:AT+FDR\r]
Mar 25 09:51:07.15: [ 161]: --> [7:CONNECT]
Mar 25 09:51:07.15: [ 161]: RECV: begin page
Mar 25 09:51:07.15: [ 161]: RECV: send trigger 022
Mar 25 09:51:07.15: [ 161]: <-- data [1]
Mar 25 09:51:23.13: [ 161]: RECV: 1136 total lines, 2 bad lines, 2 consecutive bad lines
Mar 25 09:51:23.14: [ 161]: --> [17:+FPS:1,1143,0,0,0]
Mar 25 09:51:27.42: [ 161]: --> [6:+FET:0]
Mar 25 09:51:27.42: [ 161]: RECV recv MPS (more pages, same document)
Mar 25 09:51:27.42: [ 161]: --> [2:OK]
Mar 25 09:51:27.42: [ 161]: RECV send MCF (message confirmation)
Mar 25 09:51:27.43: [ 161]: RECV FAX (00000009): from <UNSPECIFIED>, page 2 in 0:22, INF, 3.85 line/mm, 1-D MR, 14400 bit/s
Mar 25 09:51:27.43: [ 161]: <-- [7:AT+FDR\r]
Mar 25 09:51:29.46: [ 161]: --> [7:CONNECT]
Mar 25 09:51:29.46: [ 161]: RECV: begin page
Mar 25 09:51:29.46: [ 161]: RECV: send trigger 022
Mar 25 09:51:29.46: [ 161]: <-- data [1]
Mar 25 09:51:44.08: [ 161]: RECV: 1137 total lines, 1 bad lines, 1 consecutive bad lines
Mar 25 09:51:44.09: [ 161]: --> [17:+FPS:1,1143,0,0,0]
Mar 25 09:51:45.34: [ 161]: --> [6:+FET:2]
Mar 25 09:51:45.34: [ 161]: RECV recv EOP (no more pages or documents)
Mar 25 09:51:45.34: [ 161]: --> [2:OK]
Mar 25 09:51:45.34: [ 161]: RECV send MCF (message confirmation)
Mar 25 09:51:45.35: [ 161]: RECV FAX (00000009): from <UNSPECIFIED>, page 3 in 0:18, INF, 3.85 line/mm, 1-D MR, 14400 bit/s
Mar 25 09:51:45.36: [ 161]: RECV FAX (00000009): recvq/fax00008.tif from <UNSPECIFIED>, route to <unspecified>, 3 pages in 1:03
Mar 25 09:51:45.44: [ 161]: <-- [7:AT+FDR\r]
Mar 25 09:51:48.40: [ 161]: --> [7:+FHS:00]
Mar 25 09:51:48.40: [ 161]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Mar 25 09:51:48.40: [ 161]: RECV FAX: bin/faxrcvd "recvq/fax00008.tif" "ttyS0" "00000009" "" "" ""
Mar 25 09:51:51.83: [ 161]: RECV FAX: end
Mar 25 09:51:51.83: [ 161]: SESSION END
!
!