Еле настроил usb CDRW. Могу монтировать и читать с него.
Но не могу писать:
cdrecord -v dev=/dev/scd0 /tmp/file
=>
scsidev: '/dev/scd0'
devname: '/dev/scd0'
scsibus: -2 target: -2 lun: -2
cdrecord: Read-only file system. Cannot open '/dev/scd0'. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
----
cdrecord -scanbus
=>
Linux sg driver version: 3.1.22
Using libscg version 'schily-0.5'
scsibus0:
        0,0,0     0) 'IOMEGA  ' 'CDRW38402EXT2-B ' 'UOS1' Removable CD-ROM
        0,1,0     1) *
        0,2,0     2) *
        0,3,0     3) *
        0,4,0     4) *
        0,5,0     5) *
        0,6,0     6) *
        0,7,0     7) *
======
lsmod | grep "scs\|usb"
=>
usb-storage            58156   0
scsi_mod              108608   4  (autoclean) [sg sr_mod usb-storage sd_mod]
usb-uhci               24484   0  (unused)
usbcore                73152   1  [usb-storage usb-uhci]
====
Как записать на RW диск файл?

• cdrecord -dev=/dev/scd0 - PROBLEM,konst, 19:30 , 20-Фев-04
  • cdrecord -dev=/dev/scd0 - PROBLEM,SAG, 23:56 , 20-Фев-04

>Еле настроил usb CDRW. Могу монтировать и читать с него.
получилось. Но
mkisofs -o /tmp/ISO/f.iso /tmp/f.avi
cdrecord -v dev=0,0,0 speed=4 -data /tmp/ISO/f.iso
=>
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J?rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.22
Using libscg version 'schily-0.5'
atapi: 1
Device type    : Removable CD-ROM
Version        : 2
Response Format: 2
Capabilities   :
Vendor_info    : 'IOMEGA  '
Identifikation : 'CDRW38402EXT2-B '
Revision       : 'UOS1'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
Drive buf size : 1422080 = 1388 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  676 MB        
Total size:     777 MB (76:59.12) = 346434 sectors
Lout start:     777 MB (77:01/09) = 346434 sectors
Current Secsize: 11736320
cdrecord: Input/output error. read disk info: scsi sendcmd: no error
CDB:  51 00 00 00 00 00 00 00 04 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x
0
Sense flags: Blk 0 (not valid)
cmd finished after 0.320s timeout 240s
cdrecord: Cannot get disk type.
--------------
Испортил диск. Что не так я сделал?

>>Еле настроил usb CDRW. Могу монтировать и читать с него.
>получилось. Но
>mkisofs -o /tmp/ISO/f.iso /tmp/f.avi
>cdrecord -v dev=0,0,0 speed=4 -data /tmp/ISO/f.iso
>=>
>Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J?rg Schilling
>TOC Type: 1 = CD-ROM
>scsidev: '0,0,0'
>scsibus: 0 target: 0 lun: 0
>Linux sg driver version: 3.1.22
>Using libscg version 'schily-0.5'
>atapi: 1
>Device type    : Removable CD-ROM
>Version        : 2
>Response Format: 2
>Capabilities   :
>Vendor_info    : 'IOMEGA  '
>Identifikation : 'CDRW38402EXT2-B '
>Revision       : 'UOS1'
>Device seems to be: Generic mmc CD-RW.
>Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
>Driver flags   : SWABAUDIO
>Drive buf size : 1422080 = 1388 KB
>FIFO size      : 4194304 = 4096 KB
>
>Track 01: data  676 MB
>Total size:     777 MB (76:59.12) = 346434 sectors
>
>Lout start:     777 MB (77:01/09) = 346434 sectors
>
>Current Secsize: 11736320
>cdrecord: Input/output error. read disk info: scsi sendcmd: no error
>CDB:  51 00 00 00 00 00 00 00 04 00
>
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: 70 00 02 00 00 00 00 0A 00 00
>00 00 04 01 00 00
>Sense Key: 0x2 Not Ready, Segment 0
>Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming
>ready) Fru 0x
>0
>Sense flags: Blk 0 (not valid)
>cmd finished after 0.320s timeout 240s
>cdrecord: Cannot get disk type.
>--------------
>Испортил диск. Что не так я сделал?

cdrecord dev=0,1,0 <твой mkisofsобраз