вот листинг route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
100.101.102.1 *               255.255.255.252 U     0      0        0 th0
101.101.101.2    *               255.255.255.252 U     0      0        0 eth1
10.1.1.0        *               255.255.255.0   U     0      0        0 eth2
link-local      *               255.255.0.0     U     0      0        0 eth0
loopback        *               255.0.0.0       U     0      0        0 lo
default         def.gw 0.0.0.0         UG    0      0        0 eth0

кто такой вот этот link-local ?
который если сделать route -n выглядит так
169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0 eth0

Помогите кто сможет разобраться...

• про то что показывает route,jonatan, 11:18 , 25-Янв-05
  • про то что показывает route,serg2, 11:31 , 25-Янв-05

http://www.duxcw.com/faq/network/autoip.htm

Q.  What is Automatic Private IP Addressing (APIPA)?

A.  Windows 98, 98 SE, Me, and 2000 have an Automatic Private IP Addressing (APIPA) feature that will automatically assign an Internet Protocol address to a computer on which it installed.  This occurs when the TCP/IP protocol is installed, set to obtain it's IP address automatically from a Dynamic Host Configuration Protocol server,  and when there is no DHCP server present or the DHCP server is not available.  The Internet Assigned Numbers Authority (IANA) has reserved private IP addresses in the range of 169.254.0.0 -169.254.255.255 for Automatic Private IP Addressing.

http://www.rfc-editor.org/rfc/rfc3330.txt

   169.254.0.0/16 - This is the "link local" block.  It is allocated for
   communication between hosts on a single link.  Hosts obtain these
   addresses by auto-configuration, such as when a DHCP server may not
   be found.

Спасибо
понято