Столкнулись с проблемой, симптомы которой в точности описаны в статье:
https://access.redhat.com/knowledge/solutions/36193
Решение не отображается, поскольку подписка просрочена. Может обладатели активной подписки подскажут, что там в качестве решения рекомендуют?Заранее спасибо.
ResolutionCheck Hitachi SAN interface to see if the LUN is write protected or data protected.
Root CauseError "Data Protect" is described as:
Indicates that a command that reads or writes the medium was attempted on a block that is protected from this operation. The read or write operation is not performed.
Diagnostic StepsAttempt to mount the ext3 filesystem (produces error above).
Attempt to write an EXT2/3 Label to the EXT3 filesystem on the Logical Volume (also produces the above area)
Consult Hitachi support to see if the SAN LUN is write/data protected.
Еще раз спасибо!