Hello All!

Brand new AS535-2E1-60AC purchased a week ago. Were trying to get it to
accept modem calls - no way! After the number is dialed immediately got a
busy signal. Tried multiple configurations until ended up with clearing it
up all and carefully copying line by line the example configuration from
"Configuring an AS5350/AS5400 for Incoming Async and ISDN Calls"

http://www.cisco.com/en/US/products/hw/univgate/ps505/produc...
only substituting lines pertained to T1 with ISDN PRI QSIG
No success! Debug output shows:

*Sep  4 15:20:55.582: ISDN Se3/0:15 Q931: RX <- SETUP pd = 8  callref =
0x1E00
         Bearer Capability i = 0x9090A3
                 Standard = CCITT
                 Transer Capability = 3.1kHz Audio
                 Transfer Mode = Circuit
                 Transfer Rate = 64 kbit/s
         Channel ID i = 0xA9839F
                 Exclusive, Channel 31
         Calling Party Number i = 0x00, 0x81, '8442305208'
                 Plan:Unknown, Type:Unknown
         Called Party Number i = 0xC1, '5130'
                 Plan:ISDN, Type:Subscriber(local)
         Sending Complete
         Locking Shift to Codeset 5
         Codeset 5 IE 0x31  i = 0x81
*Sep  4 15:20:55.582: VDEV_ALLOCATE: 1/2 is allocated
*Sep  4 15:20:55.582: ISDN  **ERROR**: Module-CCPQSIG
Function-CCPQSIG_CallOffered  Error-Unknown event 0x4A
*Sep  4 15:20:55.582: EVENT_FROM_ISDN: dchan_idb=0x63B74DB0, call_id=0x8E,
ces=0x1
    bchan=0x1E, event=0x1, cause=0x0
*Sep  4 15:20:55.582:  dev in call to isdn : set dnis_collected &
fap_notify
*Sep  4 15:20:55.582: VDEV_DEALLOCATE: slot 1 and port 2 is deallocated

*Sep  4 15:20:55.582: EVENT_FROM_ISDN:(008E): DEV_INCALL: no signaling
channel is available
*Sep  4 15:20:55.582: ISDN Se3/0:15 **ERROR**: accept_incoming_csm_call:
modem problem Unknown modem error(0xFE): b channel 30, call id 0x8E
*Sep  4 15:20:55.586: EVENT_FROM_ISDN: dchan_idb=0x63B74DB0, call_id=0x8E,
ces=0x1
    bchan=0x1E, event=0x0, cause=0x0
*Sep  4 15:20:55.586: ISDN Se3/0:15 Q931: TX -> RELEASE_COMP pd = 8
callref
= 0x9E00
         Cause i = 0x80FE - Unknown cause value
*Sep  4 15:20:59.302: йLLTRKR-6-CALL_RECORD: ct_hndl=136, service=None,
origin=Answer, category=IsdnSync, DS0 slot/port/ds1/chan=3/0/0/30,
called=5130, calling=8442305208, resource slot/port=(n/a)/(n/a),
userid=(n/a), ip=0.0.0.0, mask=0.0.0.0, account id=148, setup=09/04/2003
15:20:57, conn=0.00, phys=0.00, service=0.00, authen=0.00, init-rx/tx
b-rate=0/0, rx/tx chars=0/0, time=0.01, disc subsys=ISDN, disc code=0x7E,
disc text=Unknown cause value

However, if we add dial-peers in order to treat the call as voice
everything
is ok. The call is being started, progressed and completed successfully.
So
the voice proccesing is perfect.

Does anyone happen to encounter this sort of a problem?

Would appreciate any help!

• as5300 не принимает модемные звонки,Andrew, 18:18 , 07-Сен-03

Do you want to accept only modem call or voice call too?
Show config of your AS5350, pls.

P.S. А по-русски ты говоришь?