The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Поиск:  Каталог документации | palmtop-newton

Newton FAQ: Part II - Hardware [4/9]

This posting gives answers to most questions concerning the Newton Message Pads. Please read before posting to comp.sys.newton.* newsgroups. This part is about the Newton MessagePad family, compatible hardware & harware problems.
Archive-name: palmtops/newton/faq/hardware
Posting-Frequency: monthly
Last-modified: 2002/10/01
URL: http://www.cat2.com/newton/Newton-FAQ/newton-faq-hardware.html,
 http://www.guns-media.com/mirrors/newton/faq/newton-faq-hardware.html,
 http://www.geocities.com/newtonresurrection/newton-faq-hardware.html,
 http://www.chuma.org/newton/faq/newton-faq-hardware.html,
 http://www.splorp.com/newton/faq/newton-faq-hardware.html,
 http://www.thisoldnewt.net/html/FAQ/newton-faq-hardware.html
Version: This is the October 2002 update
Maintainer: Steve Weyer <[email protected]>,
 Peter Rand <[email protected]>,
 Sean Luke <[email protected]> and Paul Guyot <[email protected]>

PART II: Newton Hardware

* A) The Newton MessagePad family
  + 1) What are the various Newton MessagePad models?
    x a) The full list
    x b) Some models were localized
    x c) The differences
    x d) Other differences concern the OS and the size of the memory
    x e) I have a Newton model H1000. What is this?
    x f) I heard a rumor that Apple is making a new Newton. Is this true?
    x g) How can I distinguish a MP2000 from an upgraded MP2000?
    x h) I have a Newton MP2x00 EVT/DVT or a "Newton NotePad". What is it?
    x i) I have a grey dongle for MP2x00. What's the difference with the
black ones?
    x j) Where can I find information about Newton prototypes?
  + 2) Where to find Newton MessagePads or accessories?
  + 3) What is the difference between RAM, DRAM, FlashRAM, ROM, SRAM...?
  + 4) What are the Newton's sound capabilities?
  + 5) Where can I find original manuals?
  + 6) Where can I find service manuals?
* B) Extending the MessagePad hardware
  + 1) What kind of memory cards can I use in my Newton?
    x a) What cards are suitable for the Newton?
    x b) What sizes and models are suitable for my Newton?
    x c) Can I increase the Newton's internal DRAM?
  + 2) Communications: what kind of modem/ethernet card/cell phone can I
use?
    x a) Which modem can I use?
    x b) Which cell phones can I use?
    x c) Which network cards can I use?
  + 3) What kind of keyboard can I use?
  + 4) Can I speed up the processor?
  + 5) Can I change the ROM of the Newton?
  + 6) What kind of batteries can I use?
  + 7) What kind of AC power adapters should I use?
  + 8) What kind of printers can I use?
  + 9) Can I use digital cameras with my Newton?
  + 10) Can I use a Click/IBM Microdrive/ATA Flash/Compactflash adapter in
my Newton?
  + 11) Are there any third-Party accessories that use the Interconnect
port on the 2x00 or eMate?
  + 12) Can I use an Airport/WaveLan card in my Newton?
  + 13) What cable do I need to connect to my desktop computer?
* C) Hardware problems
  + 1) Why does my MP130/MP2000/eMate whine when the backlight is on?
  + 2) Why does my MP120/130 whine?
  + 3) What should I do if I have a hardware problem with my Newton?
  + 4) Why does my Newton wake up at 3 AM?
  + 5) How long will the backlight last?
  + 6) Common hardware problems
    x a) My Newton won't turn on. What should I do?
    x b) How can I protect my MessagePad screen?
    x c) How do I turn on the backlight?
    x d) What softwares can be used to turn the backlight on?
    x e) Why does my MP100 turn itself off as soon as I turn it on?
    x f) The serial port on my MP2000/MP2100 is caved in. What do I do?
    x g) My MP2000/2100 pen input is all messed up.  What can I do?
  + 7) How to replace eMate batteries?
---------------------------------------------------------------------------


A) The Newton MessagePad family


1) What are the various Newton MessagePad models?


a) The full list

You can view most of them all at
<http://archive.dstc.edu.au/newton/hardware.html>
* Apple's Newtons:
  + Original MessagePad,
  + MP100,
  + MP110,
  + MP120 w/ NOS 1.3,
  + MP120 w/ NOS 2.0,
  + MP130,
  + MP2000,
  + MP2100,
  + eMate 300.
* Clones:
  + Sharp ExpertPad,
  + Digital Ocean Tarpon,
  + Digital Ocean Seahorse,
  + Motorola Marco,
  + Harris SuperTech 2000.
  + Siemens NotePhone, a Telephon/OMP-Clone/Modem combination

b) Localized models

The OMP 1.1, MP100, MP120 & MP130 were available in German. The MP100,
MP110 and the MP120/1.3 were available in French. The MP120/2.0-D ROM is in
fact the same than the one in the MP130-D (except for the Gestalt answer
about the kind of machine).
(From Carsten Lemmen) The OMP was available as a localized German model
with 1.1 ROMs and factory preinstalled update to 1.11. This OMP could be
upgraded (ROM replacement) to OS 1.3 (MP100 equivalent) through an Apple
upgrade program in 1994.
AFAIK there was also a Japanese Version of Newton OS, at least the Sharp
Expert Pad (OMP clone) was available with Japanese localisation.

c) The differences

Physically, 1xx models are smaller than 2k models, and they can are
equipped with only one PCMCIA slot. MP 130s, MP2ks and eMate 300 are
equipped with a backlight. The eMate 300 is equipped with a keyboard, and
it looks like the iBook, but smaller.

d) Other differences concern the OS and the size of the memory

From: Holger Schmidt, <[email protected]>, from Pascal B. Kreil
site <http://www.pbk-solutions.de>, and MSNUG Newton Gallery
<http://www.msu.edu/~luckie/newtgal.htm>.

Hardware informations
+--------+-----+----+-------+------+-----------+-----+----------+---------+
|	 |     |    |	    |	   |	       |     |		|	  |
| Type:  | RAM |ROM |  CPU  | N/OS |   Peri.   | Fax |	Screen	|  Sound  |
|	 |     |    |	    |	   |	       |     |		|	  |
+--------+-----+----+-------+------+-----------+-----+----------+---------+
| OMP	 |640K |4MB |ARM 610| 1.0  |one PC Card|send |		| Speaker |
|	 |     |    | 20MHz |(1.05)|one Serial |only | 336x240	| only	  |
|	 |     |    |	    | 1.1  |IR(ASK)    |     |		|	  |
+--------+-----+----+-------+------+-----------+-----+----------+---------+
| Sharp  |640K |4MB |ARM 610| 1.0  |one PC Card|send | 320x248	| Speaker |
| Expert |     |    | 20MHz |(1.05)|one Serial |only |		| only	  |
|  Pad	 |     |    |	    |	   |IR(ASK)    |     |		|	  |
+--------+-----+----+-------+------+-----------+-----+----------+---------+
| MP100  |640K |4MB |ARM 610| 1.3  |one PC Card|send |		| Speaker |
|	 |     |    | 20MHz |	   |one Serial |only | 336x240	| only	  |
|	 |     |    |	    |	   |IR(ASK)    |     |		|	  |
+--------+-----+----+-------+------+-----------+-----+----------+---------+
|Motorola| 1MB |5MB |ARM 610|1.0.2?|one PC Card|send | 320x240	|	  |
|	 |     |    | 20MHz |1.0.3?|one Serial |and  |back-light|   ???   |
| Marco  |     |    |	    |	   |IR, modem  |rec  |		|	  |
+--------+-----+----+-------+------+-----------+-----+----------+---------+
| MP110  | 1MB |4MB |ARM 610| 1.3  |one PC Card|send | 320x240	| Speaker |
|	 |     |    | 20MHz |	   |one Serial |only |		| only	  |
|	 |     |    |	    |	   |IR(ASK)    |     |		|	  |
+--------+-----+----+-------+------+-----------+-----+----------+---------+
| MP120a | 1MB |8MB |ARM 610| 1.3  |one PC Card|send | 320x240	| Speaker |
|	 |  *  |    | 20MHz |	   |one Serial |and  |		| only	  |
|	 |     |    |	    |	   |IR(ASK)    |rec  |		|	  |
+--------+-----+----+-------+------+-----------+-----+----------+---------+
|Digital | 2MB |4MB |ARM 610| 1.3? |one PC Card|send | 320x240	| Speaker |
| Ocean  |     |upgr| 20MHz | 2.0? |one Serial |and  |back-light| only	  |
| Tarpon |     |    |	    |	   |IR, Radio  |rec  |		|	  |
+--------+-----+----+-------+------+-----------+-----+----------+---------+
|Digital | 2MB |4MB |ARM 610| 1.3? |one PC Card|send | 320x240	|	  |
| Ocean  |     |upgr| 20MHz | 2.0? |one Serial |and  |back-light|   ???   |
|SeaHorse|     |    |	    |	   |IR, Radio  |rec  |		|	  |
+--------+-----+----+-------+------+-----------+-----+----------+---------+
| Harris | 2MB |4MB |ARM 610| 1.3? |one PC Card|send | 320x240	| Speaker |
| Super  |     |upgr| 20MHz | 2.0? |one Serial |and  |back-light| only	  |
|Tech2000|     |    |	    |	   |IR, 2xRadio|rec  |		|	  |
+--------+-----+----+-------+------+-----------+-----+----------+---------+
| MP120b | 2MB |8MB |ARM 610| 1.3  |one PC Card|send | 320x240	| Speaker |
|	 |  *  |upgr| 20MHz | 2.0  |one Serial |and  |		| only	  |
|	 |     |    |	    |	   |IR(ASK)    |rec  |		|	  |
+--------+-----+----+-------+------+-----------+-----+----------+---------+
| MP130  |2.5MB|8MB |ARM 610| 2.0  |one PC Card|send | 320x240	| Speaker |
|	 |  *  |upgr| 20MHz |	   |one Serial |and  |back-light| only	  |
|	 |     |    |	    |	   |IR(ASK)    |rec  |		|	  |
+--------+-----+----+-------+------+-----------+-----+----------+---------+
| eMate  | 3MB |4MB |ARM 710| 2.1  |one PC Card|send | 480x320	|Speaker, |
| 300	 |     |    | 25MHz |	   |one Serial |and  |back-light|headphone|
|	 |     |    |	    |	   |IR(IrDA)   |rec  | 16 grays | jack	  |
+--------+-----+----+-------+------+-----------+-----+----------+---------+
| MP2000 | 5M* |8MB |Strong | 2.1  |two PC Card|send | 480x320	|Speaker* |
|	 |     |    |  ARM  |	   |one Serial |and  |back-light| and	  |
|	 |     |    |162MHz |	   |IR(IrDA)   |rec  | 16 grays | micro   |
+--------+-----+----+-------+------+-----------+-----+----------+---------+
| MP2100 | 8MB*|8MB |Strong | 2.1  |two PC Card|send | 480x320	|Speaker* |
|	 |     |    |  ARM  |	   |one Serial |and  |back-light| and	  |
|	 |     |    |162MHz |	   |IR(IrDA)   |rec  | 16 grays | micro   |
+--------+-----+----+-------+------+-----------+-----+----------+---------+

Other informations:
+--------+----+--------+-------+
| Type:  | lg |Codename|  Rel  |
|	 |    |        |  Date |
+--------+----+--------+-------+
| OMP	 | en |        |8/3/93 |
|	 | de |        | 12/93 |
+--------+----+--------+-------+
| Sharp  | en |        |       |
| Expert | de |        |   ?   |
|   Pad  |    |        |       |
+--------+----+--------+-------+
|	 | de |        |   ?   |
| MP100  | en |        |  3/94 |
|	 | fr |        |   ?   |
+--------+----+--------+-------+
| MP110  | en |  Lindy |  3/94 |
|	 | fr |        |   ?   |
+--------+----+--------+-------+
| MP120  | de |        |10/94 D|
|  1.3	 | en | Gelato |1/95 US|
|	 | fr |        |       |
+--------+----+--------+-------+
| MP120  | de |        |       |
|  2.0	 | en |    Q   | 11/95 |
+--------+----+--------+-------+
| MP130  | de |        |       |
|	 | en |  Dante |  3/96 |
+--------+----+--------+-------+
| eMate  |    |        |  4/97 |
| 300	 | en |        |       |
+--------+----+--------+-------+
| MP2000 | en |        |  3/97 |
+--------+----+--------+-------+
| MP2100 | de |        | 11/97 |
|	 | en |        |       |
+--------+----+--------+-------+


*[Robert Sexton's Note] The MP2000/MP2100/eMate has a special connector,
known as the interconnect port, which contains the line in, line out, and
two serial ports.  At the time of this writing, the interconnect port
connector is not widely available. The eMate has an interconnect port, a
headphone jack and a regular serial/LocalTalk port.
The MP120 (1MB) memory consists of 639K of DRAM and 385K of FlashRAM.
<http://docs.info.apple.com/article.html?orig=til&artnum=17080>
The MP120 (2MB) memory consists of 687K of DRAM and 1361K of FlashRAM.
<http://docs.info.apple.com/article.html?orig=til&artnum=18815>
The MP130 memory consists of 1,199K of DRAM and 1,361K of FlashRAM.
<http://docs.info.apple.com/article.html?orig=til&artnum=19336>
The eMate memory consists of 2MB FlashRAM and 1MB DRAM.
<http://docs.info.apple.com/article.html?orig=til&artnum=20992>
The MP2000 memory consists of 1MB of DRAM, and 4mb of Flash RAM. The MP2100
memory (and upgraded MP2k) consists of 4MB of DRAM, and 4Mb of Flash RAM.

e) I have a Newton model H1000. What is this?

You have an original Newton MessagePad (OMP), the first model made, or you
have an MP100, its immediate successor.

f) I heard a rumor that Apple is making a new Newton. Is this true?

That's very probably just a rumor based on the interest of Apple for Palm
devices. BTW, Palm Desktop which is to be found on iBooks is compatible
with NCU (the format is like Claris Organizer).

g) How can I distinguish a MP2000 from an upgraded MP2000?

The difference between both is simply the DRAM size. If Apple upgraded the
MP2000, there should be a MP2100 sticker near the interconnect port and the
serial number. Otherwise, you can simply go to the Memory Info (press the
[i] button under Extras) which should tell System RAM installed something
close to 4 MB (3984 KB) if you have an upgraded MP, or something close to 1
MB if you have a MP2000.

h) I have a Newton MP2x00/eMate 300 EVT/DVT or a "Newton NotePad". What is
it?

EVT and DVT are two levels of prototype in the Newton program.
The initial prototypes were called "EVT" ("Engineering Verification Test").
After the EVT units were tested for a while, and various changes were made,
the DVT ("Development Verification Test") units were created. DVT units
were supposed to be closer to the final production devices.
Initial EVT prototypes were similar to the final MP2K, except instead of
the StrongARM processor, they had the ARM710 processor (same as the eMate).
A second batch of EVT devices ("EVT 2" devices) with StrongARM processors
were built.
A batch of DVT devices was built. Most of the units were configured as the
original MP2000. There were a few 4mb DRAM devices built in the DVT run
(they therefore are like MP2100s). Besides, some units have a special ROM
Board with an additional 8 MB of Flash for Internal memory (bringing the
total to 12 MB). There may have been units with Flash instead of ROM and
with 16 MB of ROM instead of 8.
The Newton NotePad were probably DVT units of the original MessagePad. It's
not known how they differed from the production OMPs.

i) I have a grey dongle for MP2x00. What's the difference with the black
ones?

Brian Parker reported on Usenet:
I have a very weird gray Newton 2K serial adapter!  It appears to be
exactly the same as the normal black ones, except it is beige/gray and has
"TAIWAN N 2" instead of China on the bottom. It has the same part number as
the black ones.
Don Vollum answered:
IIRC, the gray adapters were for the DVT (second batch of prototype) 2000
units (codenamed "N2"). [Editor's note: cf the previous question]
The EVT units had black adapters, which looked like the production ones.
Between the EVT 2 run and the DVT run, they changed one of the pins, hence
the need for different adapters.
I believe that functionally, the gray adapter should be identical to a
production unit.

j) Where can I find information about Newton prototypes?

There was several Newton prototypes. Some pictures can be found in Newton
Gallery <http://www.msu.edu/~luckie/newtgal.htm>.
Larger pictures with some text are available at Newton Secrets Secret
Newtons: <http://www.a-in-a-circle.com/newton/>.
Finally, Russ Uzes purchased a Newton Cadillac on eBay and put some
pictures there: <http://www.uzes.net/newton>.

2) Where can I find a Newton MessagePad and Newton accessories?

* eBay <http://www.ebay.com/> on the Internet.
* comp.sys.newton.marketplace.
* Tima Scientific <Tima Scientific>
* Small Dog Electronics <Small Dog Electronics> (use the search box)
* Battery Tech: <http://bti.batterytech.com/catalog_model.asp?id=16> for
Apple Battery Pack
Additionally, you can buy parts directly from Sun Remarketing
<http://www2.sunrem.com/sun02.w?grp=Newtons> or Apple themselves. To buy
parts to Apple, you need first to get the part numbers (available on Sun
Remarketing Website).
[This is a direct quote from csnm. Unfortunately, I lost the original
message. If anyone can remind me who was the author of this contribution,
I'll add necessary credits]
Call the Apple Fulfillment Center at 1-888-273-3594. This is the department
within Apple that someone was once transferred to in a previous message.
There is no guarantee that you will experience the same level of success
using it. Don't call Apple support at (800) SOS-APPL as you may waste many
hours of your life in this endeavour.
Tell them you would like to order a replacement part and that you have all
the info already (ie. part number, case number-if necessary). Since you
didn't call Apple SOS to get a case number try to stay away from this
subject. I was also prepared to lie and say that my Newton was still under
warrenty. That part number for the Newton replacement Flip Top is
#922-3306.  Cost?  Around $10 USD [Myron reported the price is now 43 USD
as of June, 21st, 2001]. Remember it, learn it, love it.
Have a credit card ready and provide them with shipping information and
credit card number. Shipping cost you ask? Roughly $5 USD for ground
shipping (US + Canada) taking 10-12 days or $20 (USD) for Fed Ex shipping
(1-2 days I think).
[Additional comment by PG] If you chose FedEx and they failed to deliver
the parts in time, they'll charge you the regular price, $5.50
Thanks the person on the phone for solving your door issues then quietly
hang up as you have escaped the long waiting, frustrating conversations and
general annoying details of talking to Apple about the Newton.
Wait. Door should arrive (hopefully) soon after allotted shipping time.
Open arrived package, attach new door, chill and serve. Voila!
[Newer report by Christopher Dean (07/05/2001)]
Dongles are still available through Apple. It is listed in their "service"
catalogue and are available from your Apple reseller.
The cost is $38 Australian (US$ 19).
[Parts numbers]
The prices are approximate and may have changed since we received the
information. Please keep in mind that we don't know which parts are
actually available. Most of the items are from Carsten Lemmen. However, I
thought that 922-2940 was the eMate Display Housing, not the Display Bezel
(which I thought to be 922-2939)
* eMate parts
  + Backlight, Electroluminescent (EL)	    922-2681
  + Battery, NiMH			    922-2938
  + Bezel, eMate Display		    922-2940
  + Card, ROM, eMate			    661-1195
  + Case, Bottom Assembly		    922-2941
  + Case, Top (includes Logic Board)	    661-1194
  + Cover, Top, eMate Display		    922-2939
  + Door, Battery, ROM, RAM Access	    922-2674
  + Feet, Rubber, Pkg. of 4		    922-2679
  + Handle, Rubber Cushion		    922-2678
  + Holder, Name Card			    922-2676
  + Keyboard, eMate			    922-2398
  + Key, Dummy, Keyboard, eMate 300	    076-0636
  + Latch Kit				    076-0633
  + LCD Assembly, eMate 		    661-1193
  + Lens, I/R				    922-2677
  + Plug, Screw, Bezel, Pkg. of 4	    922-2680
  + Plugs, Ink Well, Right and Left, Kit    076-0634
  + Plugs, Screw, Bottom Case, Kit	    076-0635
  + Screw Kit				    076-0637
  + Sleeve, Battery			    922-2675
  + Stylus (eMate Pen)			    922-2682
* MP2x00 Parts
  + Battery Pack, Rechargeable, NiMh	    922-2968 32.50 USD (or 34 USD?)
  + Battery Tray						       
922-3307 10 USD
  + Cable, Adapter, MessagePad2000 to DIN-9 922-2971
  + Case, Carrying, MessagePad 2000	    922-2976
  + Case, Carrying, Nylon, MessagePad 2000  922-2972
  + Stylus, MessagePad 2000, Pkg. of 5	    922-2969  43 USD (21/06/2001)
(maybe it's the price for a single stylus)
  + Flip Top							       
922-3306* 43 USD (21/06/2001)
  + Serial Adapter (dongle?)				590-0756A 11 USD
* MP110/120/130 Parts:
  + 2.0 ROM Card, French (not for MP110)    F661-1054
  + 2.0 ROM Card, German (not for MP110)    D661-1054
  + Back Cover Assembly 		    076-0526
  + Battery Pack, Rechargable		    661-1105
  + Battery Cover  (Pkg. of 5)		    922-0755
  + Battery Recharger			    922-0753
  + Case, LC, Leather			    922-0761
  + Case, Leather			    922-0896
  + Cover, Battery, Lithium (Pkg. of 5)     076-0491*
  + Lithium Battery Cover,MP110 (Pkg. of 5) 922-0756
  + Cover, Battery (Pkg. of 5)		    922-1285
  + Cover, Top, Hinged (Pkg. of 5)	    076-0492*
  + Foot, Rubber (Pkg. of 50)		    922-1375
  + I/O Cover				    922-1686*
  + I/R Cover				    922-1687*
  + On/Off Knob 			    922-1688*
  + Rubber Foot, MP110 (Pkg. of 50)	    922-0757
  + Stylus (Pkg. of 5)			    922-0754
  + Stylus, Recharger Cradle		    922-0759
* OMP/MP100 Parts:
  + Battery Cover, Plastic (Pkg. of 5)	    922-2037
  + Battery Holder, 4AAA (Pkg. of 10)	    922-2038
  + Battery Pack, Nicad 		    661-1693
  + Battery Recharger			    922-0562
  + Case, Carrying, Leather		    922-0563
  + Case, Carrying, Sport		    922-0569
  + Cover, Connector Rubber (Pkg. of 20)    922-2039
  + Cover, Slip, Vinyl (Pkg. of 5)	    922-2040
  + Stylus, MessagePad (Pkg. of 10)	    922-2036
* Parts for all Newton Products:
  + Adapter Plug, Australia		    922-2975
  + Adapter Plug, Europe		    922-2974
  + Adapter Plug, UK			    922-2973
  + Adapter, Power, Newton, 9 Watt	    922-2951
  + Cable, Macintosh Connect		    922-0564
  + Cable, PC Connect			    922-0565
  + Battery Booster Pack		    922-0570
  + Cable, Print Pack			    922-2035
  + Case, Modem, Pkg. of 10		    922-0714
  + Flash Memory Card 2MB		    661-1695
  + Keyboard Slipcover			    922-1493
  + Keyboard				    661-0963
  + Keyboard, British			    B661-0963
  + Keyboard, French			    F661-0963
  + Keyboard, German			    D661-0963
  + Keyboard, Swedish			    S661-0963
  + Modem Card Assembly, PCMCIA 	    661-1745
  + Modem, Data/Fax, 2400 Baud, External    661-1692
  + Power Adapter, In-Line  (old model)     922-0560
  + Power Adapter,Right Angle,Australia     X922-0561
  + Power Adapter,Right Angle,Great Britain B922-0561
  + Power Adapter, Right Angle, Int'l	    Z922-0561*: I'm not sure, which
Newton this part belongs to

3) What is the difference between RAM, DRAM, FlashRAM, ROM, SRAM...?

RAM stands for Random Access Memory. It is the designation for memory that
can be both written to and read. ROM stands for Read Only Memory. ROM
cannot be written to. It is used in the Newton for the Operating System.
Hence you cannot delete it.
SRAM stands for Static RAM. An SRAM cell consists of a small semiconductor
circuit (a flipflop), that holds one bit of information. As long as power
is supplied to this flipflop, it will retain its current state (unless
changed intentionally, of course), hence the back-up batteries in SRAM
cards.
DRAM is for Dynamic RAM. A DRAM cell is constructed to be a tiny capacitor.
It is much cheaper to manufacture, and can be much smaller. However, the
capacitor will slowly lose it's charge, hence the need to refreah it
regularly. Also, the needed time to (un)load the capacitor in order to
store a bit of information is significantly longer than the time needed to
(re)set a flipflop.
FlashRAM is based on EEPROM technology. It's a kind of memory that does not
lose its contents when power is no longer supplied. It is used for storage
on the Newton.

4) What are the Newton's sound capabilities?

To record sounds, remember that you'll need a microphone which can only be
found on 2.1 devices.
Software which allows you to record and playback sounds:
* The Newton's built-in recording stationary (MP 2k only)
* VoiceNotes (by Modasys) dramatically improves the Newton's recording
quality, and uses memory much more efficiently than the built-in recording
stationary, thereby turning the Newton into a useful digital recorder.
<http://www.modasys.de>
* The freeware program ModPlayer by  Roger Milne lets you play MOD files
directly on your Newton.
<http://www.geocities.com/SiliconValley/Code/5100/>
* Eckhart KЖppen ported MAD, an MP3 player <http://40hz.org/MADNewton/>
* There are also various sound packages available. Search UNNA
<http://www.unna.org/unna/sounds/> for sounds such as:
  + StarWars/Babylon 5/StarTrek/Simpsons
  + Shane Hill sounds: <http://members.tripod.com/SDHEngSoft/>
  + The freeware program VoiceAlarm by Serg Koren lets you record sounds
which can be used as alarm sounds on the Newton.
<http://www.VisualNewt.com/>
  + Make-your-own audio adaptor (Dave Miller). This site provides advice
how to make a headphone jack for your Newton:
<http://www.eskimo.com/~millerd/nicadapter/index.html>

5) Where can I find original manuals?

The manuals can be found on Apple's FTP, Rochester FTP and UNNA
* <ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/>
*
<ftp://ftp.cif.rochester.edu/pub/newton/FAQ_and_documentation/apple_manuals
/>
* <http://www.unna.org/unna/apple/documentation/>
* 1.x devices Manuals (including 1.x to 2.0 upgrade related manuals)
  + Newton System Update 1.3 for the MessagePad 100 and MessagePad 110
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0307279AMP1
00110UD1.3.PDF>
  + Upgrading Your MessagePad 120 for the Macintosh Operating System
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0307841ANMP
120UPG.PDF>
  + New Features of the Newton 2.0 Operating System
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0307843ANOS
2FTURS.PDF>
  + Transferring Information from an Earlier Model Newton Personal Digital
Assistant (PDA) (moving data from a 1.x device to a 2.0 device)
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0308274Newt
onTransferInst.pdf>
* MP120 2.0 and 130 Manuals
  + Apple MessagePad Handbook(Big manual for the MP130, suitable for the
MP120 except for backlight which the MP120 doesn't
have)<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/030725
8ANEWTONMP.PDF> or
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0308951ANAP
LMPHNDBK.PDF>
  + Late-Breaking Information (addenda to the Newton Handbook)
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0308508AILA
TEBKGINFO.PDF>
  + Important Information for the MP120/2.0(Before you use your Apple
MessagePad 120 with the Newton 2.0 operating system, it is important that
you make a backup copy of the pre-installed software
packages.)<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0
307519AIMPINFO.PDF>
* eMate 300 Manuals
  + eMate Manual
<http://www.unna.org/unna/apple/documentation/eMate/eMateUserManual.pdf>
  + eMate 300 Getting Started Guide
<http://www.unna.org/unna/apple/documentation/eMate/eMateGettingStarted.pdf
>
  + eMate Classroom Exchange
<http://www.unna.org/unna/apple/documentation/eMate/ClassroomExchangeManual
.pdf> or
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0073557ACLA
SSRMXCHG.PDF>
  + Important Information About Your eMate 300(Review the information to
find out about making backup copies of your information and using
StyleWriter
printers.)<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0
300534AEM300BUERRV.PDF> or
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0305126AEM3
00II.PDF> or
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0330534AEM3
00II.PDF>
  + Rechargeable battery for the eMate 300
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0330414ARBE
MATE300.PDF>
  + eMate 300 Teacher's Guide
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0340024ANCN
CTOPWRPLG.PDF> or
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0340273AEMA
TE300TG.PDF> or
<http://www.unna.org/unna/apple/documentation/eMate/eMateTeachersGuide.pdf>
  + Using the eMate Connectivity CD
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0340063AEMC
NCTCDUM.PDF>
* MP2x00 Manuals
  + Important Information About Your MessagePad 2000(Review the information
to find out about making backup copies of your information and using
NewtWorks, PC Card modems and
printing.)<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0
306222AMP2000AD.PDF> or
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0330504AMSG
PAD2000UD.PDF>
  + MessagePad 2000 Getting Started Guide
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0306224AMP2
000GS.PDF>
  + MessagePad 2000 User's Manual
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0306251AMP2
000UM.PDF>
  + Using E-Mail on Your MessagePad 2000
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0340196AMP2
000EMAIL.PDF>
  + Upgrading Your MessagePad 2000 (Important information before sending
the MP2000 to Apple)(Note: Apple no longer upgrades MP2000s, see question
IIB1c)<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/Z0330
679AUPGMP2000.PDF>
* Apple software Manuals
  + Newton Backup Utility User's Guide
    x For the Macintosh Operating System
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0080027ANEW
TBACKUG.PDF>
    x For Windows
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0300028ANEW
TUGWOS.PDF>
  + Newton Conneciton Utilities User's Manual
    x For the Macintosh Operating System
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0307273ANCN
CTMOSUM.PDF>
    x For Windows
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0307288ANCN
CTWINUM.PDF>
  + Newton Press User's Guide
    x For the Macintosh Operating System
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0307735ANPM
OSUG.PDF>
    x For Windows
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0307736Newt
onPressWin.pdf>
  + Newton Internet Enabler User's Manual
    x NIE 1.x
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0340011ANIE
UM.PDF>
    x NIE 2.0
<http://www.unna.org/unna/apple/documentation/ematedoc/NIE20USE.PDF>
  + Newton Connection 2.0 Update
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0305272ANCN
CT2UD.PDF>
  + Newton Connection Kit for Windows Userуs Guide
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0305277ANCN
CTKITWINUG.PDF>
  + NewtonWorks Manuals
    x NewtonWorks Word Processor Userуs Manual
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0306284ANWW
PUM.PDF>
    x Newton Works Graphing Calculator Userуs Manual
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0340062ANWG
RAFCALCUM.PDF>
    x See also questions VB4b and VB4d
* Apple additional hardware Manuals
  + Using the Newton Print Pack
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0330870ANWT
NPRPK.PDF> or
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0330941APRT
PKFCC.PDF>
  + Connecting Power Plugs
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0340024ANCN
CTOPWRPLG.PDF>
  + Newton 9W Power Adapter (English, French, German, Japanese)
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/ZM0305334AN
9WPWRADPT.PDF> or
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/ZM5334ANWTN
9WPWRADP.PDF>
  + Newton Rechargeable Battery Pack (English, French, German, Japanese)
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/ZM0309847AN
RCHGBTRYPK.PDF> or
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/ZM9847ANWTR
ECHBATPAK.PDF>
* Misc manuals
  + Important Late-Breaking Information(If you have a MessagePad,
MessagePad 100, or MessagePad 110 device and want to transfer information
from the Name File, Notepad, and Date Book, applications, and application
data to your MessagePad 120, please follow these
instructions.)<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newt
on/0307176ANMPLATEBKG.PDF>
  + Connecting a Newton PDA to your Macintosh
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0307372ACNC
TNPDAMAC.PDF>
  + About Cables
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0308266ANCB
LS.PDF>
  + Using E-Mail on Your Newton Device
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0340315ANEM
UM.PDF>
  + Important Information (about GSM and TDK Modem)
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/ZMP2000AD.P
DF>
  + FREE Newton Backup Utility (how to get a free copy of NBU)(Note: you
can no longer get this free
copy)<ftp://ftp.cif.rochester.edu/pub/newton/FAQ_and_documentation/apple_ma
nuals/0308582AFREENBUUTIL.PDF>
* Newton Enhancement Pack and Third Party software Documentation(The Newton
Enhancement Pack is a 2 MB Flash card which came with third party software)
  + Getting Started With Your Newton Enhancement Pack
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0307500ANEN
HPKGS.PDF>
  + Newton Utilities User's Manual
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/NewtonUtili
tiesUM.pdf>
  + Welcome to Newton! Installing Your Newton Software (manual to install
software and Expense Plus in particular - apparently a manual for Apple
Employees)
<ftp://ftp.cif.rochester.edu/pub/newton/FAQ_and_documentation/apple_manuals
/0306817ANSWII.PDF>

6) Where can I find service manuals?

Service manuals are like ghosts on Apple's FTP. They appear and disappear
periodically. However, the Newton service manuals are not really exciting.

sp stands for specifications, ba for basics. emate.up.pdf explains how to
do the eMate upgrade. Manuals with no extension includes these plus a
worthless section called troubleshooting, and exploded view (MP 1xx), which
is worthless, too. eMate manual also includes a section about the
diagnostic (to be used with a special card from Apple). Here is the URL:
<ftphqx.info.apple.com/Apple_Support_Area/Misc/Service/servicemanuals/>
* emate.ba.pdf (343 Ko)
* emate.pdf (2913 Ko)
* emate.sp.pdf (105 Ko)
* emate.up.pdf (251 Ko)
* messagepad.ba.pdf (79 Ko)
* messagepad.sp.pdf (109 Ko)
* messagepad_100.110.120.130.pdf (209 Ko)
* messagepad2100.ba.pdf (95 Ko)
* messagepad2100.sp.pdf (92 Ko)
* messagepad_2000.2100.pdf (221 Ko)
In case they disapear again, there is a mirror at:
<http://www.traffictrak.com/ServiceManuals/>. Apparently, there isn't all
manuals there.
Victor Rehorst made a mirror which is available at:
<http://guelph.unna.org/mirrors/>
---------------------------------------------------------------------------


B) Extending MessagePad hardware


1) What kind of memory cards can I use in my Newton?


a) What cards are suitable for the Newton?

You can use SRAM cards or FlashRAM cards. SRAM cards are more expensive
than FlashRAM cards, and they need an internal battery.
There are several kinds of flash memory cards available today. There are
ATA flash cards, compact flash cards, SmartMedia flash cards and linear
flash cards. Linear, ATA and compact cards are the same size, but only
linear (or regular) cards can be used in Newton Message Pads, and not all.
(see next question).

b) What sizes and models are suitable for my Newton?

There are several common kinds of linear cards, depending on the chip used
in it.

Memory Card compatibility

+--------+--------+--------+--------+--------+
|	 |  All   |  All   |	    |	     |
| Model  |  1.x   |  2.0   | MP2x00 | eMate  |
|	 | models | models |	    |	300  |
+--------+--------+--------+--------+--------+
|	 |	  |	   |	    |	     |
| SRAM	 |  Yes   |  Yes   |  Yes   |  Yes   |
|	 |	  |	   |	    |	     |
+--------+--------+--------+--------+--------+
|AMD D/AD|	  |	   |	    |	     |
|	 |   No   |  Yes   |  Yes   |  Yes   |
| 5v/5v  |	  |	   |	    |	     |
+--------+--------+--------+--------+--------+
|Intel II|	  |	   |	    |  Read  |
|	 |  Yes   |  Yes   |  Yes   |  Only  |
| 5v/12v |	  |	   |	    |	     |
+--------+--------+--------+--------+--------+
| Intel  |	  |	   |	    |	     |
|  II+	 |   ?	  |  Yes   |  Yes   |  Yes   |
| 5v/5v  |	  |	   |	    |	     |
+--------+--------+--------+--------+--------+
| Intel  |	  |	   |	    |	     |
| VS 100 |   No   |   No   |  Yes   |  Yes   |
| 5v/5v  |	  |	   |	    |	     |
+--------+--------+--------+--------+--------+
| Intel  |	  |	   |	    |	     |
| VS 200 |   No   |   No   |   No   |	No   |
| 5v/5v  |	  |	   |	    |	     |
+--------+--------+--------+--------+--------+
VS: Value Series

Please note that I compiled this table from various sources.
SRAM cards are said to only work if they are 4 MB or smaller.
It is believed that you need Newton OS 2.x to use flash cards bigger than 4
MB, however it appears to be wrong at least with the Intel Series II+ in a
MP100: Harri Hohteri <[email protected]> succeeded in using such
a card in his MP2100, his MP130 and his MP100.
It is believed that Series II+ only work in 2.x models, but Harri Hohteri's
40 MB card works in his MP100.
The maximum size limit has been said to be 4 MB, 32 MB, or any other value.
Apparently, there is no size limit but the linear cards limit (64 MB),
however nobody reported to have been able (or unable) to use a 64 MB card.
If you do, please contact us.
Intel and AMD are technologies and most of the time suppliers of the chips,
not brands. Therefore Intel cards can be sold under different brand names
(Apple for example ;-). You can identify them by their part number:
nn is the memory capacity in MB
* Series II: iMC0nnFLSA
* Series II+: iMC0nnFLSP
* VS 100: iMC0nnFLSC
The best source about Flash Cards is Carsten Lemmen's website. His page
about memory cards is available in English
<http://www.mac3.de/sig/newton/memory_cards.html> and in German:
<http://www.mac3.de/sig/newton/Speicherkarten.html>

c) Can I increase internal DRAM memory?

You can increase the DRAM memory of the MP2000 by doing the MP2100 upgrade.
Apple no longer do it. Some companies sell the kit or do the upgrade such
as PixSolution <http://www.pixsolution.com/> & Digital Dave
<http://www.kc.net/~drnewton>
You can expand both the DRAM and the Flash on eMate 300 to what the MP2100
has, by installing a NewerRAM <http://www.newerram.com/> or another memory
module.
[From Otto Sohn:] To my knowledge there is not a single manufacturer who
still produces/stocks these cards. The only chance seems to be getting one
on eBay. There have been rumors, though, that one of the manufacturers (I
forgot which one - Lifetime ? Peripheral Enhancements ?) was possibly
considering producing another batch if someone would buy their production
of these cards wholesale. It was rumored to be 25+ cards minimum. I don't
know if that is true.
Related information on eMate upgrades is also available at:
* "Apple eMate 300: Memory Upgrade Discussion"
<http://docs.info.apple.com/article.html?orig=til&artnum=30408> where the
following is said:

"When internal DRAM memory is installed, the total amount of DRAM available
will equal that on the expansion card. However, when internal flash memory
is installed, the storage memory area equals the amount of original
internal flash memory plus that on the internal expansion card.

For example, an expansion card with 4 MB of DRAM and 2 MB of flash memory
would result in a configuration of 4 MB of DRAM and 4 MB of flash memory."
* <http://www.lifetimememory.com/Pages/LMPnpemate2.html> where this
additional information is supplied:

"An additional benefit is that with the expanded DRAM, the eMate will
reconfigure its data path for processed data from 16 to 32 bit, greatly
increasing responsiveness."
Instructions for a do-it-yourself upgrade can be found on Abe Lee's site
at: <http://user.chollian.net/~cehz/frame2.htm>

2) Communications: what kind of modem/ethernet card/cell phone can I use?


a) Which modem can I use? How do I make a modem script?

Any compatible external modem should work properly.
[From Helmut Fischer]: To connect MP and external modem, use a standard
Apple Macintosh modem cable. Works on all MPs I have tried (120, 130,
2100).
For internal modems, there is a complete list maintained by Len Lutz
<[email protected]> at:
<http://www.dca.net/cgi-bin/cgiwrap/lenlutz/newton.cgi>
DNUG maintains a list of drivers and scripts:
<http://www.dnug.dk/info/modems.html>
To make a modem script, you can use the sample code provided by Apple,
Modem Setup (latest version is 2), which you can find on UNNA.
Combo cards don't work without a specific driver. Some have one, but most
don't. In the best case you can use the modem part of the card. If the
Newton says "A communications card has been inserted" when you insert a
combo card, it means that the modem part has been recognized and might
work.

b) Which cell phones can I use?

Here's a summary of cell phone compatibility for the Newton. Information on
modems and drivers are further below. Thanks to all the individual
contributors who provided info about their cell phones.
* Motorolla 'Micro TAC Alpha'
*From: <[email protected]> (David Rouse)*
I've had excellent results with a Motorolla 'Micro TAC Alpha' (flip phone,
on the larger side) and a CELLect 14.4 PCMCIA modem card (which has a neat
geeky manual, it even covers UUCP). Both products are, I believe, as
discontinued as the Newton itself.
* Ericsson T18s
*From: <[email protected]> (Peter Hofmann)*Hi, i use with my 2100 a
Option 56k GSM ready Card and Ericsson T18s Cell Phone. My Ericsson SH888
also was a good deal (pity you can use the built-in modem)
* Motorola Startac
*From: <[email protected]> (D. Hochberg/J. Leong)*
I've got a motorola startac with an ositech 5 of diamonds modem. no
problems.
* Motorola DPC650
*From: <[email protected]> (Dave Fleishman)*
I have had some success with a Motorola DPC650, a MOT-1 cable from
Megahertz and a Megahertz XJ4288 modem.  Dials great, connects great, but
the cellular connection is slow, and unless I'm near a cell tower, it can
drop in the middle of the transfer.  I used both the 14.4 and higher
setting, and the CruiseCard 28.8 setting with success.	I have also had
success with a Motorola "black box" with just about all PC card modems I
have used.  Let me know if you need the part number for it, because I keep
it in my car.
* Motorola 6200, 8200, 8400, 8700, 8900
*From: <[email protected]>*
I'm using the CEllect 1+ card and a Newton 130 with a driver I found in a
free data-base a year ago. (sorry, I don't remember the URL) I put up a
page with those informations here:
<http://jetai.unipv.it/falzoni/cellect.html> Feel free to copy any
information/driver from this page. I don't know if the driver works with
other models of Newton/cellect. I only tested these phones: motorola 6200,
8200, 8400, 8700, 8900 and flare. 100% ok with my CELLect 1+ card and MP
130.
* Nokia 2110 & 2110(i)
*From: <[email protected]> (Orjan J Larsson)*
Nokia 2110 and 2110i with an Nokia DTP-2 PC Card works like a charm with an
Newton too.
Also Options 33.6K PC Card modem with "GSM ready" logo onto them, with GSM
cable for Siemens S4, works with Option drivers from www.novamedia.de. Both
as a standard 33.6K modem, as an cellular. Haven't tried anything else than
an S4, but presume that , as you just change cable, it would work with any
cellular that Option has an cable for. Both data and fax, in both cases, I
might add.

* Nokia 6110
*From: <[email protected]> (Roman Pixell)*
I'm using the mp2000 today with a nokia 6110 and an option modem card. i
rewrote the script, and it works ok i guess.
* Nokia 8110
*From: <[email protected]> (Kenneth Wong)*
I'm using the Nokia Cellular Data Card DTP-2v2 with my Nokia 8110.

* Nokia 880, 2110(i), 3110, 3810, 5000, 8110(i), 8146, 8148i - and clones
like Technophone, some Philips models.
*From: <[email protected]> (Harri)*
Nokia 880, 2110(i), 3110, 3810, 5000, 8110(i), 8146, 8148i models works
with DTP-2 ver.II Nokia Cellular Data Card and Nokia GSM ISDN driver. Nokia
880, 2110(i), 5000 (this might be Mobira Cityman not Nokia) and 2110
-clones like Technophone, some Philips-models work with DTP-2 Nokia
Cellular Data Card and Nokia GSM Auto driver. These might work (and
probably will) with each others drivers. The Nokia 6150 can be connected
with TDK, option and some other 3rd party PC Card. These cards support
several other brands and models. The Motorola 8700 - All Motorola phones
which support Cellect PC Card are supported by gsm-motorola driver. Some
future and currently available phones which has built-in modem should be
compatible. These phone are Nokia 7110, Siemens S25, Bosch 909. None of the
phones above can use IrDA to communicate because of the un-complete IrDA
support on Newtons. Obviously some Ericsson models are supported because
there's such thing as gsm-ericsson driver available. I have no idea which
phones.
* Sagem RD435 Helmut Fischer has been able to connect his Newton to this
phone using an Apple Modem cable (MinitDIN8 <-> DB9) and connecting the DB9
part to a standard phone - PC cable. He reports: I had to modify the Apple
cable slightly (remove the connection between RxD+ and GND).
* Siemens S25.
*From: Olaf 'Holger' Bohlen*
Today I connected my MP130 to my S25 GSM phone with a normal PC Data-Cable
from Siemens and a Macintosh to PC Modem Adapter Cable. My configuration
for the modem is: "Hayes compatible", "serial" and "no waiting for
dialtone". And it works great. I was able to fax, to mail and to phone :)
* Merlin Wireless Modem.
Mark Rollins put all information on a web page:
<http://www.mrollins.com/newtmerlin.html>
* Motorola TimePort P280
*From: <[email protected]> (Eric Schneck)*
I got the Motorola TimePort P280 working (in analog mode) with my 2100. I
need to do a manual dial-up because otherwise it hangs at the login prompt.

c) Which network cards can I use?

(From Victor Rehorst, <[email protected]>)
For the 120/2.0 and 130, only one network card is known to work. (From
NewtonTalk) <[email protected]> (Donald T. Stewart) writes:I purchased
the Roamer (a PC card wireless networking device) and a DynaCOMM Network
Access Point from e-bay a couple of months ago, but just today tried to get
them working.  I have no trouble using a 2.0 MP120 with them, and seem to
ba able to access my home Apple Talk network wirelessly.
This card is seemingly incompatible with OS 2.1.
Newtons running OS 2.1 and NIE 2.0 can use ethernet cards from certain
manufacturers, with the proper drivers.  The following is an almost
exhaustive list:
* Farallon PN895 EtherWave
* 3Com 3c589, 3C589B (according to Harri Hohteri), 3c589C, 3c589D
(including -TP), 3CXE589DT, 3CXE589ET
* Proxim RangeLAN2 wireless Ethernet *note* this card is not compatible
with AirPort or any other 802.11-based technology
* AmbiCom AMB8010 PowerSaver
* TDK Combo cards: DFL5610, DFL3410, DFL3200, DFL9610
* TDK Ethernet cards: LAK-CD021, LAK-CD021AX, LAK-CD021BX
* D-Link DE-650, DE-660 (can be found at zones.com for US$43.99 plus
shipping) [Thanks to Kent Wong] DE-660+
* Fujitsu FMV-J182, FMV-J182A
* RATOC REX-R280
* Contec C-NET(PC)C
* MELCO LPC2-T
* Longshine LCS-8534TB
* Correga EtherII PCC-T
All of the above drivers are available from Newton Resources:
<http://www.chuma.org/newton/ethernet/>
Note: This applies to TCP/IP. Cf question VB1e"How can I connect to the
Newton using Ethernet with NCU/NPI/NBU?" for these software.

3) What kind of keyboard can I use?

The eMate has a keyboard built-in. No other Newtons do.
Apple Computer made a special optional keyboard which can be plugged into
the MP2k's serial port - no other keyboard can be used.
You can also use a keyboard with MP120 w/ NOS 2.0 & MP130.
There are hacks (software and/or hardware) which allows one to use this
keyboard with earlier Newtons as well.
* Newtkey is a keyboard driver for NOS 1.x devices.
<http://www.contrib.andrew.cmu.edu/usr/gf2e/newtkey/>.
Information (but no solution) for using Palm Stowaway keyboards can be
found at <Grant Hutchinson's site>.

4) Can I speed up the processor?

Yes, PixSolution <http://www.pixsolution.com/english.html> or
<http://www.pixsolution.com/> offers kits to speed up the MP2ks and MP130s.
They can install it.
(From Harri Hohteri <[email protected]>) For DIY (stands for
do-it-yourself) guys there's an article about accelerating MP120 by Lewin
A.R.W. Edwards:<http://www.larwe.com/technical/accel_mp120.html>
Stephanie Macks wrote two pages for homebrew MP2x00
(<http://www.felesmagus.com/newton/2100fast.html>) and eMate
(<http://www.felesmagus.com/newton/ematefast.html>) speed up.

5) Can I change the ROM of the Newton?

Theoretically, the ROM of Newton MP 120 can be changed from Newton OS 1.3
to Newton OS 2.0. But you've got to find a ROM chip to do this. Other ROM
chips on OMP and MP110 are soldered to the motherboard.
Interestingly, the ROM in an OS 2.1 device (MP2x00, eMate) is installed on
a card, with room for four more ROM chips...

6) What kind of batteries can I use?

You can use alkaline batteries, rechargeable batteries (NiCD, NiMH, ...) or
the Apple battery pack. The MP120 & the MP130 can recharge them (with a
little piece of paper to press the button under the batteries).
Please note that recharging NiMH batteries in MP1x0s can damage the Newton.
Cf: <http://www.newtontalk.net/archive/newtontalk.2002-02/2503.html>.
Only the Apple battery pack can be recharged inside the MP2k. For all other
batteries you will need a separate battery charger, or to modify the
battery holder as described by Nick MЭller:
<http://www.logictools.de/newton/akku_mod/akku2k.html>.

7) What kind of AC power adapters should I use?

The best advice is to use a Newton-branded adapter. Any Newton adapter will
work with any Newton. There are two adapters, the original adapter (shipped
with MP1x0s) and the 9W adapter (officially for MP2x00 and eMates). Both
work in every Newton but the 9W adapter charges batteries faster than the
original adapter (except in the MP100).
Apple published a tech note about that:
<http://docs.info.apple.com/article.html?orig=til&artnum=21114>
Too many Newtons have had their power supplies fried using third party
adaptors. However, if you want to try at your own risk, please note that,
on MP2k, adapters should have the following characteristics:
(-)==( *-(+), 5V DC, 400 mA [This one works, even to recharge batteries, in
both a MP2x00 and a MP120]
This diagram means that the plus is inside and the minus is outside. I'm
not an ASCII artist, but this looks a little bit like the diagram on both
the original adapter and this adapter
Helmut Fischer reported: On my original 9W power adapter (MP2100) it says
7.5V 1.2A. It also works with the MP130.
With his MP120 & MP130, Jacek Jadwiszczak uses a 7V, 3W. Also: 6V works
(but no charging batteries) and 7.5V works just fine, always at least 3W
are needed. Please note that he hadn't give me the polarity yet, and in all
cases, nusing a third party adapter could fry your Newton
Carl Schultz reports:
I have been using a Radio Shack AC adapter for almost a year now. It is the
3-12 volt adjustable model. The new model # is 273-1680 ($34.99 list) and
is rated at 1000mA. Mine is the older 800mA model but otherwise is the
same. The adapter came with several different plug ends, none of which was
correct for my MP2000. I had to buy another one, which I don't have the
part number for, but it has a yellow end if that helps (they are all color
coded). This end may now be included with the adapter, since the Radio
Shack description states that 4 of the included ends are "new". Make sure
that you install the connector in the "tip positive" configuration. I've
been using mine daily at work with no problems.
Michael Vacik reports that the RadioShack plug adapter to use is the
Adaptaplug C:
<http://www.radioshack.com/product.asp?cookie%5Ftest=1&catalog%5Fname=CTLG&
category%5Fname=CTLG%5F004%5F001%5F003%5F000&product%5Fid=273%2D1706>
You might want to check Johannes Wolf advice:
<http://marc.theaimsgroup.com/?l=newtontalk&m=102812823519465&w=2>

8) What kind of printers can I use?

Apple has a technote answering this question for NewtonOS 2.x:
<http://karchive.info.apple.com/article.html?artnum=19483>
There are basically three ways to print things from a Newton:
First, you can print with a serial connection (or an AppleTalk connection -
LaserWriter-compatible printers only - or via IrDA if you have a
MP2x00/eMate 300). For this, you need a driver. The NewtonOS has drivers in
the ROM which appear in the list when you select "Choose Other Printer"
from the print dialog. There are also drivers written by Apple which can be
found on UNNA for the SW4500 & SW6500 and the HP IrDA printers (NewtonOS
2.1 devices only): <http://www.unna.org/unna/drivers/printer/> [I know
there's a non working one for Epson printers, but is there any other driver
around?]
Apple also released a PrintPack which includes a serial/parallel adapter
and which can print on several parallel printers (for the list, cf the
documentation of the software which can be found on UNNA
<http://www.unna.org/unna/drivers/printer/PrintPack2/>).
PrintPack 1 was a cable with the drivers included in it. PrintPack 2
requires the drivers to be on the Newton.
Without the hardware, the PrintPack2 drivers are useless. The
serial/parallel adapter includes a processor and was manufactured by GDT
Softworks (which later became InfoWave) for Apple. This company also
manufactured compatible cables, the pre-V.4.X cables. A regular
serial/parallel adapter will certainly not work.
About the GDT Softworks cables, Jon Glass reports:
I do recall there being a discussion that the last version of the GDT
Softworks version of the PowerPrint adapter wouldn't work with the Newton.
I do know this, the one I have does work with my Epson 900 (Yea!!!).
I'm having trouble trying to decipher what's written on the back, so I'll
include all the text:
"Advanced Components & Peripherals P/L
Made in Singapore
FCC ID KBVSPC1
P/N: 590-0839 (whatever "P/N" stands for)
Batch: SPC292

LR99812"
Finally, you you can also print using a PC and Newton PC-Print by Alexander
Kunzer: <[email protected]>
The HP Deskjet 340CBi is battery powered and has a newton-compatible IrDA
(NewtonOS 2.1 devices) adapter.

9) Can I use digital cameras with my Newton?

Yes you can. You need Tibet Software. This software is no longer supported,
but Russell Tait (the author of Tibet) gave away some registration codes
you can use:
* 02FDAA084142
* 02FDAA090E49
* 02FDAA0A1390
The following digital cameras will work with a MP2k and Tibet software
provided that you have the proper serial cable to connect to the Newton
(i.e., a serial cable to connect to macintoshes):
* Agfa ePhoto 307
* Agfa ePhoto 780
* Agfa ePhoto 780c *
* Agfa ePhoto 1280
* Agfa 1680
* Fuji
* Nikon CoolPix 800
* Nikon CoolPix 900
* Nikon CoolPix 950
* Olympus D-300L
* Olympus D-320L
* Olympus D-340R
* Olympus D-360L
* Olympus D-450Z
* Olympus Camedia C-400
* Olympus Camedia C800L (that's what it is called in Europe, the US
designation is different)
* Olympus C-1000 L
* Epson PhotoPC 700
Neal Sofge <[email protected]> reports:
I have an Agfa ePhoto 780c, which is apparently an updated version of the
780 in an iMac-compatible blue case.  It works with Tibet, but only if you
"distract" the camera by sliding the lens cover open and closed while
trying to communicate with it.	The timing on this is tricky, but you can
get good at it after enough practice.
It seems some cameras are compatible with the Fujitsu chipset. (which the
Olympus have inside)
The following cameras will not work:
* QuickTakes
* Kodaks
* Connectix QuickCams
Canon cameras were once reported as compatible, but Daniel Padilla
<[email protected]> said they don't. At least his PowerShot 350
doesn't. (<http://www.average.org/digicam/>)
Daniel Padilla also reported that to work with Tibet Software, a camera
needs to have the Sierra imaging firmware and a serial port. Look at
<http://www.sierraimaging.com/support/supchimgex.html> for a list of
supported cameras.

10) Can I use a Click/IBM Microdrive/ATA Flash/Compactflash adapter in my
Newton?

Not yet. There is a package to support such hardware being in development.
More info can be found here: <http://www.kallisys.com/newton/ata/>

11) Are there any third-Party accessories that use the Interconnect port on
the 2x00 or eMate?

[From Victor Rehorst: <[email protected]>]
Enfour makes serial cables with an Interconnect port molded onto one end,
eliminating the need for a serial dongle:
<http://www.enfour.com/newton/cables/index.html>.
You can build your audio in/out dongle. Details are at
<http://www.eskimo.com/~millerd/nicadapter/>.

12) Can I use an Airport/WaveLan card in my Newton?

Yes.  Just like an Ethernet card, you need an OS 2.1 Newton, NIE 2.0
installed, and the appropriate driver.	The only available drivers so far
is written by Hirochi Noguchi, and is available at:
<http://www.ff.iij4u.or.jp/~ngc/eng/newtwave.htm>
The driver seems to work with most Lucent WaveLAN cards, and is designed to
use a base station.  Apple AirPort base stations with software version 1.3
or 2.0 are known to work.

13) What cable do I need to connect to my desktop computer?

[Partly from Apple's Manual "About Cables"
<ftp://manuals.info.apple.com/Apple_Support_Area/Manuals/newton/0308266ANCB
LS.PDF>]
You can connect to your Newton using either a serial cable or an ethernet
card (connection from a 2.1 device to MacOS computers only). Please note
that using an Ethernet card means first installing the proper driver.
The MP1x0 devices and the eMate 300 have a Mini-DIN-8 RS232 and LocalTalk
compatible port. You can use either a Mini-DIN-8 to Mini-DIN-8 serial cable
to connect to an old-world Macintosh (beige), a Mini-DIN-8 to DB25 cable to
connect to a DB25 Serial port on a Windows Box or a Mini-DIN-8 to USB via
an USB/Serial adapter to a new-world Macintosh. You cannot use IrDA with
Apple Software (see section IIIB3c).
The MP2x00 have an Interconnect port. Using a dongle, you can have a
RS422/GeoPort/LocalTalk compatible port. You can connect the same cable as
with the other Newtons.
See section IIIB3b for the various ways to transfer data to/from your
desktop computer, software and hardware.
---------------------------------------------------------------------------


C) Hardware problems


1) Why does my MP130/MP2000/eMate whine when the backlight is on?

(From Robert Sexton's FAQ) Backlit Newtons use the same technology that is
found in indiglo watches. The backlighting uses high voltages, and this
requires a transformer which makes the noise.  If you listen carefully to
an indiglo watch, you will notice the same effect.
Apple published a tech note about it:
<http://docs.info.apple.com/article.html?orig=til&artnum=45002>

2) Why does my MP120/130 whine?

(From Robert Sexton's FAQ) If you are referring to the sound made by the
backlighting (on MP130), see previous question. The humming when the
MessagePad operates (More noticeable when the CPU is idle) is caused by a
small power transformer. Its a bit annoying, but there is no workaround for
it. Some MessagePads are reportedly noisier than others. This affects the
MP110-MP130.
Apple published a tech note about it:
<http://docs.info.apple.com/article.html?orig=til&artnum=45002>

3) What should I do if I have a hardware problem with my Newton?

Apple can still repair Newton devices, for seven years after they announced
the discontinuation of the Newton platform. In the US and in Canada, there
is a flat fee. It will cost between 175-200 USD and 180 CAD respectively.
In the UK, the cost depends on the repair. It will cost around 400 GBP for
a motherboard change and around 200 GBP for a screen change (these fees are
of course subject to change and were the announced fees in November, 2000).
* US users: (from Laurent Daudelin)
To arrange the repair, call 1-800-275-2273 and request technical support.
When you talk to someone, tell them you're calling for a Newton. They
should arrange to have the Newton repaired. If things don't go as expected,
call the Apple Repair Center in Memphis that handles Newton repairs at
800-233-6555. The people that answer the phone are not very cooperative or
knowledgeable. They serve as a barrier between you and the actual staff
that perform the repair. Insist on talking to a supervisor if you're not
pleased with the answers they give you.
[This is a more recent experience (June, 29th, 2001) from Cliff Penwell]
You can call the Apple Service Center at 1-800-275-2273, opt 1, opt 5, and
tell them what's wrong. (Eventually they sent me to 1-800-320-3728, but I
think you have to start at the other number.)
When I told the service rep what I owned, he told me he had never handled a
Newton repair request and didn't think they still did them, but when I gave
him the serial number he went and checked with someone and verified that it
was an MP2000 and said they still had parts and could do it.
I got a dispatch number for the repair and called the other number, and
they took my credit card info and said I should receive a return box within
four days. Total cost is about $194, including shipping, with about a
ten-day turnaround.

* Canada users:
All information (a full page) is available at Newton Resources:
<http://www.chuma.org/newton/docs/apple-canada-repair.shtml>
* Europe users:
Contact ADT/ECPRC, the Apple Repair center: <http://www.ecprc.com/>
Considering the fee they will ask, you can try the solutions to the
frequent hardware problems (IIC6).

4) Why does my Newton wake up at 3 AM?

(From Robert Sexton's FAQ) The Newton wakes up to move your Todos over from
yesterday, and do other housekeeping.

5) How long will the backlight last?

(From Robert Sexton's FAQ) <[email protected]> (Alan Drogin) says, It has a
"half life" conjectured to be in the low thousands of hours.  Which
translates to at least a couple of years, which also means it doesn't stop
working, just gets dimmer, which ultimately means its within the normal
limits of planned obsolescence accepted by the high tech world.
One thing I can't give a definitive answer to is the actual half life. 
I've seen plenty of posts claiming that the half life of the MP130
backlighting is 1600-1700, but no actual proof of source. I've seen claims
about the MP2K backlighting at 2000 and even 5000. John Schettino saw some
web sites from backlighting manufacturers claiming 15,000-20,000 hour half
lives.
Apple published a tech note about it:
<http://docs.info.apple.com/article.html?orig=til&artnum=45018>

6) Common hardware problems


a) My Newton won't turn on. What should I do?

There are a number of things you can try.  Try the following, in increasing
order:
* Put in fresh batteries and plug in the Newton's power adapter.  Turn on
the machine.
* With batteries or the power adapter installed, press the reset button. On
the original MessagePad, MP100, MP110, MP120, and MP130, the reset button
is visible when you remove the battery door.  On the MP2000 and MP2100 the
reset button is on the underside of the machine.
* For the original MessagePad, MP100, MP110, MP120, and MP130, replace the
backup battery.  Put in fresh batteries and plug in the Newton's power
adapter.  Press the reset button.
* For the MP2000 and MP2100, press and hold the reset button for over
twenty seconds. This is a special reset sequence for these machines.
* For the original MessagePad, MP100, MP110, MP120, and MP130, with the
batteries or power adapter installed, press and hold the reset button down,
then press the power switch.  Continue to hold the reset button for two
more seconds.  Release the reset button.  A dialog box appears asking "Do
you want to erase data completely?".  Tap on the "NO" button (you don't
want to erase your data!).
* For the MP2000 and MP2100 *only*, remove the battery, cards, and power
adapter.  Let the Newton sit by itself for a few hours.  Leave it a whole
day or a whole night if you can.  You won't lose any data.  Then put in
fresh alkalines, and plug in the power adapter.  Press the reset button. 
This procedure cures nearly every turning-on problem these models have.
* If you have an original MessagePad or an MP100, see section IIC6eof this
FAQ.
* For the MP2x00s, Sean Luke reports: one last resort you can try is to
crack it open and see if its daughtercard has become unseated from its
slot. This happened to me.
* If your Newton still does not wake up, consider posts to the newsgroups
or mailing lists, or consider shipping the unit to Apple.See also section
IIIB2 of the FAQ

b) How can I protect my MessagePad screen?

Try one of these:
* WriteRights by Concept Kitchen <http://www.conceptkitchen.com>
* NuShield Screen Protectors by Mark Ross <http://www.nushield.net>
* You can also use a Digital Writer by A.T. Cross to protect the screen
against damage in the first place (digital writers are inserts for Cross
pens. About $6 each.) Order digital writers from Norma Houle
<[email protected]>
* The Francophone Newton User Group (GFUN) has a page to explain (in
French, of course) how to make your own screen protector:
<http://perso.wanadoo.fr/dbenet/film.htm>
* James Elliott has evaluated several types of commercially available
transparency papers for use as screen protectors. He also offers
downloadable templates so you can make your own screen protectors from
these materials:
<http://newted.dyndns.org/users/jelliott/screenprotectors.html>

c) How do I turn on the Newton's backlight?

Backlights are included in MP2ks, MP130s and eMate 300. On MP2ks and
MP130s, just depress the power switch until the backlight is activated. To
switch it off, do the same. On eMate 300, just press the light button. The
backlight can also be activitated through software (cf next question).

d) What softwares can be used to turn the backlight on?

* Softwares that add/have a button:
  + Avi's Backdrop (Avi Drissman) <http://www.drissman.com/avi/>
  + DashBoard (FiveSpeed) <http://www.fivespeed.com/dashboard/index.html>
  + BackLight (Sean's Utilities)
<http://download.planetnewton.com/download/>
* Softwares that allows the backlight to be turned on when the Newton is
turned on:
  + PowerPrefs (Jim Bailey) (probably to be found on AMUG)
  + Options (SBM) [allows to set time range] <http://www.sbm.nu/>
  + MoreInfo (Silverware) <http://www.silverware.com/>
  + Sunrise (Any info?)
  + Silk (Catamount) [probably the most complete one]
<http://www.catamount.com/Silk.html>
  + Lava <http://revolution.cx/lava.html>			
* Other softwares (additional information needed!)
  + Adam Tow's Backlight Plus <http://www.tow.com/>

e) Why does my MP100 turn itself off as soon as I turn it on?

Old MessagePads (in particular, MP100s) develop power-on problems due to
gunk building up inside the power switch which raises its resistance.  Sean
Luke maintains a web page with workarounds and outright fixes at
<http://www.cs.umd.edu/users/seanl/newton/>

f) The serial port on my MP2000/MP2100 is caved in. What do I do?

The serial port is poorly soldered onto the MP2K motherboard, and
eventually it can wear out and cave in.  If you are very *very* good at
solder, you might try opening the machine and resoldering the contacts. But
it's very difficult, and even proficient solderers won't attempt it. Most
likely, your only recourse is to have Apple fix the problem: see section
II.C.3
The chief culprit here is the Newton's "dongle", the small plug which
connects to the Newton.  The dongle has two bumps on the top and two bumps
on the bottom, which help the dongle stay locked in the serial connector,
but cause considerable friction and stress on entry and exit.  To prevent
problems in the future, you might try filing down the bumps on the top.

g) My MP2000/2100 pen input is all messed up.  What can I do?
This is a problem known as the "Jaggies".  The symptoms are:- invalid pen
input, ie. you draw something and the Newton displays something totally
different - random pen input appearing when you draw or writeIt can be
caused by two things:- Dirt that has collected between the lip of the case
and the touchscreen. This can be aggravated by resting your hand on the
case while writing, causing the dirt to trigger an unwanted "tap" on the
screen - A warped case that is exerting pressure on the touchscreen,
thereby confusing the Newton's calibration - A damaged or oxidized
touchscreen connector inside your Newton - A damaged touchscreenIf you
suspect that dirt is the culprit, you can attempt to clean between the case
and the screen:1) Remove any screen protectors that are installed.2) Take a
thin card (such as a paper business card, nothing thicker than a credit or
bank card) and gently insert a corner of it in the gap between the case and
the screen.  Run the card along all of the edges of the screen - the goal
here is to remove any dirt particles that may be wedged between the case
and the screen.3) Using a soft cloth, such as a lens or photographic
cleaning cloth (**NOT** tissue paper!) wipe up the dirt that was
dislodged.4) It's probably a good idea to give the screen a nice cleaning
now, before reinstalling your screen protector.Or, it's possible that a
warped case is the culprit, in which case you can try to de-warp
it:<http://marc.theaimsgroup.com/?l=newtontalk&m=99928252123070&w=2>If none
of this does the trick, then either the touchscreen connector needs
cleaning, or the screen must be replaced.  Replacing the screen or cleaning
the touchscreen should only be attempted by an experienced person, as it
required almost complete disassembly of the Newton.

7) How to replace eMate batteries?

[This manual has been written by Robert Benschop ( <[email protected]>].
To replace your eMate batteries you'll need a torx 8 screwdriver and 4 NiMH
batteries preferably with soldering lips on them of at least 1200 mAh (the
higher the better) and basic soldering skills, nothing too fancy.
Before you proceed with this, first make a backup (or if you're the careful
type, two) and then open the little lid on the back of your eMate next to
the handle with the torx 8 screwdriver.
Your battery pack is the dark rectangular shaped thing that lies in it's
own recessed place on the top (I'm considering the handle as the top side
of the eMate)
* On the right hand side you'll see a couple of wires coming from the
battery pack that attach to the eMate with a little white plug.
* Slide the plug off so that you can lift out the battery pack.
* Open the hard plastic outer casing so that you'll have the actual
batteries in your hands still in the plastic wrapping.
* Cut away the wrapping, replace the old batteries with the new ones in hte
same order of course, while soldering the connections back exactly the way
they were ! (don't forget the temperature sensor, just solder it back in
the same spot on your new batteries, this is about the only moment you
really have to pay attention, so that the temperature sensor will still be
working).
* If you want to keep everything really neat put heatshrink around the four
batteries so that they're as neat and tidy as the original pack.
* Put the hard plastic outer casing back on, reconnect, close the lid,
charge and away you go, happy forever after. (or at least for another
couple of years)
In case you put in i.e. 1600 mAh batteries you'll get even longer lasting
battery life as a bonus.
[Robert added with his usual modesty:]
Actually, I posted the instructions quite a few times to the list in text
(and that might be in the FAQ, I never read the FAQ myself ;-) but there's
an even better instruction (with how-to pictures) made by Frank Gruendel on
<http://www.pda-soft.de/emate_battery_pack.html>



Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру