Author: Christophe JAILLET <[email protected]> Date: Sat May 20 11:48:55 2023 +0200 3c589_cs: Fix an error handling path in tc589_probe() commit 640bf95b2c7c2981fb471acdafbd3e0458f8390d upstream. Should tc589_config() fail, some resources need to be released as already done in the remove function. Fixes: 15b99ac17295 ("[PATCH] pcmcia: add return value to _config() functions") Signed-off-by: Christophe JAILLET <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/d8593ae867b24c79063646e36f9b18b0790107cb.1684575975.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Armin Wolf <[email protected]> Date: Fri Mar 24 21:26:27 2023 +0100 ACPI: EC: Fix oops when removing custom query handlers [ Upstream commit e5b492c6bb900fcf9722e05f4a10924410e170c1 ] When removing custom query handlers, the handler might still be used inside the EC query workqueue, causing a kernel oops if the module holding the callback function was already unloaded. Fix this by flushing the EC query workqueue when removing custom query handlers. Tested on a Acer Travelmate 4002WLMi Signed-off-by: Armin Wolf <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: void0red <[email protected]> Date: Wed Apr 5 15:57:57 2023 +0200 ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects [ Upstream commit ae5a0eccc85fc960834dd66e3befc2728284b86c ] ACPICA commit 0d5f467d6a0ba852ea3aad68663cbcbd43300fd4 ACPI_ALLOCATE_ZEROED may fails, object_info might be null and will cause null pointer dereference later. Link: https://github.com/acpica/acpica/commit/0d5f467d Signed-off-by: Bob Moore <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Tamir Duberstein <[email protected]> Date: Wed Apr 5 15:42:43 2023 +0200 ACPICA: Avoid undefined behavior: applying zero offset to null pointer [ Upstream commit 05bb0167c80b8f93c6a4e0451b7da9b96db990c2 ] ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d #3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d #4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 #6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac #7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 #8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 #9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 #10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 #11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac #12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d #13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master. Link: https://github.com/acpica/acpica/commit/770653e3 Signed-off-by: Bob Moore <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Sergey Bostandzhyan <[email protected]> Date: Fri Sep 6 11:33:43 2019 +0200 Add Acer Aspire Ethos 8951G model quirk [ Upstream commit 00066e9733f629e536f6b7957de2ce11a85fe15a ] This notebook has 6 built in speakers for 5.1 surround support, however only two got autodetected and have also not been assigned correctly. This patch enables all speakers and also fixes muting when headphones are plugged in. The speaker layout is as follows: pin 0x15 Front Left / Front Right pin 0x18 Front Center / Subwoofer pin 0x1b Rear Left / Rear Right (Surround) The quirk will be enabled automatically on this hardware, but can also be activated manually via the model=aspire-ethos module parameter. Caveat: pin 0x1b is shared between headphones jack and surround speakers. When headphones are plugged in, the surround speakers get muted automatically by the hardware, however all other speakers remain unmuted. Currently it's not possible to make use of the generic automute function in the driver, because such shared pins are not supported. If we would change the pin settings to identify the pin as headphones, the surround channel and thus the ability to select 5.1 profiles would get lost. This quirk solves the above problem by monitoring jack state of 0x1b and by connecting/disconnecting all remaining speaker pins when something gets plugged in or unplugged from the headphones jack port. Signed-off-by: Sergey Bostandzhyan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Stable-dep-of: 90670ef774a8 ("ALSA: hda/realtek: Add a quirk for HP EliteDesk 805") Signed-off-by: Sasha Levin <[email protected]>
Author: Tobias Brunner <[email protected]> Date: Tue May 9 11:00:06 2023 +0200 af_key: Reject optional tunnel/BEET mode templates in outbound policies [ Upstream commit cf3128a7aca55b2eefb68281d44749c683bdc96f ] xfrm_state_find() uses `encap_family` of the current template with the passed local and remote addresses to find a matching state. If an optional tunnel or BEET mode template is skipped in a mixed-family scenario, there could be a mismatch causing an out-of-bounds read as the addresses were not replaced to match the family of the next template. While there are theoretical use cases for optional templates in outbound policies, the only practical one is to skip IPComp states in inbound policies if uncompressed packets are received that are handled by an implicitly created IPIP state instead. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Tobias Brunner <[email protected]> Acked-by: Herbert Xu <[email protected]> Signed-off-by: Steffen Klassert <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kuniyuki Iwashima <[email protected]> Date: Tue May 9 17:34:55 2023 -0700 af_unix: Fix a data race of sk->sk_receive_queue->qlen. [ Upstream commit 679ed006d416ea0cecfe24a99d365d1dea69c683 ] KCSAN found a data race of sk->sk_receive_queue->qlen where recvmsg() updates qlen under the queue lock and sendmsg() checks qlen under unix_state_sock(), not the queue lock, so the reader side needs READ_ONCE(). BUG: KCSAN: data-race in __skb_try_recv_from_queue / unix_wait_for_peer write (marked) to 0xffff888019fe7c68 of 4 bytes by task 49792 on cpu 0: __skb_unlink include/linux/skbuff.h:2347 [inline] __skb_try_recv_from_queue+0x3de/0x470 net/core/datagram.c:197 __skb_try_recv_datagram+0xf7/0x390 net/core/datagram.c:263 __unix_dgram_recvmsg+0x109/0x8a0 net/unix/af_unix.c:2452 unix_dgram_recvmsg+0x94/0xa0 net/unix/af_unix.c:2549 sock_recvmsg_nosec net/socket.c:1019 [inline] ____sys_recvmsg+0x3a3/0x3b0 net/socket.c:2720 ___sys_recvmsg+0xc8/0x150 net/socket.c:2764 do_recvmmsg+0x182/0x560 net/socket.c:2858 __sys_recvmmsg net/socket.c:2937 [inline] __do_sys_recvmmsg net/socket.c:2960 [inline] __se_sys_recvmmsg net/socket.c:2953 [inline] __x64_sys_recvmmsg+0x153/0x170 net/socket.c:2953 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffff888019fe7c68 of 4 bytes by task 49793 on cpu 1: skb_queue_len include/linux/skbuff.h:2127 [inline] unix_recvq_full net/unix/af_unix.c:229 [inline] unix_wait_for_peer+0x154/0x1a0 net/unix/af_unix.c:1445 unix_dgram_sendmsg+0x13bc/0x14b0 net/unix/af_unix.c:2048 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg+0x148/0x160 net/socket.c:747 ____sys_sendmsg+0x20e/0x620 net/socket.c:2503 ___sys_sendmsg+0xc6/0x140 net/socket.c:2557 __sys_sendmmsg+0x11d/0x370 net/socket.c:2643 __do_sys_sendmmsg net/socket.c:2672 [inline] __se_sys_sendmmsg net/socket.c:2669 [inline] __x64_sys_sendmmsg+0x58/0x70 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0x0000000b -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 49793 Comm: syz-executor.0 Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: Michal Kubiak <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kuniyuki Iwashima <[email protected]> Date: Tue May 9 17:34:56 2023 -0700 af_unix: Fix data races around sk->sk_shutdown. [ Upstream commit e1d09c2c2f5793474556b60f83900e088d0d366d ] KCSAN found a data race around sk->sk_shutdown where unix_release_sock() and unix_shutdown() update it under unix_state_lock(), OTOH unix_poll() and unix_dgram_poll() read it locklessly. We need to annotate the writes and reads with WRITE_ONCE() and READ_ONCE(). BUG: KCSAN: data-race in unix_poll / unix_release_sock write to 0xffff88800d0f8aec of 1 bytes by task 264 on cpu 0: unix_release_sock+0x75c/0x910 net/unix/af_unix.c:631 unix_release+0x59/0x80 net/unix/af_unix.c:1042 __sock_release+0x7d/0x170 net/socket.c:653 sock_close+0x19/0x30 net/socket.c:1397 __fput+0x179/0x5e0 fs/file_table.c:321 ____fput+0x15/0x20 fs/file_table.c:349 task_work_run+0x116/0x1a0 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline] syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297 do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffff88800d0f8aec of 1 bytes by task 222 on cpu 1: unix_poll+0xa3/0x2a0 net/unix/af_unix.c:3170 sock_poll+0xcf/0x2b0 net/socket.c:1385 vfs_poll include/linux/poll.h:88 [inline] ep_item_poll.isra.0+0x78/0xc0 fs/eventpoll.c:855 ep_send_events fs/eventpoll.c:1694 [inline] ep_poll fs/eventpoll.c:1823 [inline] do_epoll_wait+0x6c4/0xea0 fs/eventpoll.c:2258 __do_sys_epoll_wait fs/eventpoll.c:2270 [inline] __se_sys_epoll_wait fs/eventpoll.c:2265 [inline] __x64_sys_epoll_wait+0xcc/0x190 fs/eventpoll.c:2265 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0x00 -> 0x03 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 222 Comm: dbus-broker Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 3c73419c09a5 ("af_unix: fix 'poll for write'/ connected DGRAM sockets") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: Michal Kubiak <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Adam Stylinski <[email protected]> Date: Sun May 21 10:52:23 2023 -0400 ALSA: hda/ca0132: add quirk for EVGA X299 DARK commit 7843380d07bbeffd3ce6504e73cf61f840ae76ca upstream. This quirk is necessary for surround and other DSP effects to work with the onboard ca0132 based audio chipset for the EVGA X299 dark mainboard. Signed-off-by: Adam Stylinski <[email protected]> Cc: <[email protected]> Link: https://bugzilla.kernel.org/show_bug.cgi?id=67071 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Kailang Yang <[email protected]> Date: Tue Nov 23 16:32:44 2021 +0800 ALSA: hda/realtek - Add headset Mic support for Lenovo ALC897 platform [ Upstream commit d7f32791a9fcf0dae8b073cdea9b79e29098c5f4 ] Lenovo ALC897 platform had headset Mic. This patch enable supported headset Mic. Signed-off-by: Kailang Yang <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Stable-dep-of: 90670ef774a8 ("ALSA: hda/realtek: Add a quirk for HP EliteDesk 805") Signed-off-by: Sasha Levin <[email protected]>
Author: Kailang Yang <[email protected]> Date: Fri Jan 17 14:04:01 2020 +0800 ALSA: hda/realtek - Add Headset Mic supported for HP cPC [ Upstream commit 5af29028fd6db9438b5584ab7179710a0a22569d ] HP ALC671 need to support Headset Mic. Signed-off-by: Kailang Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Stable-dep-of: 90670ef774a8 ("ALSA: hda/realtek: Add a quirk for HP EliteDesk 805") Signed-off-by: Sasha Levin <[email protected]>
Author: Kailang Yang <[email protected]> Date: Mon Jun 13 14:57:19 2022 +0800 ALSA: hda/realtek - ALC897 headset MIC no sound [ Upstream commit fe6900bd8156467365bd5b976df64928fdebfeb0 ] There is not have Headset Mic verb table in BIOS default. So, it will have recording issue from headset MIC. Add the verb table value without jack detect. It will turn on Headset Mic. Signed-off-by: Kailang Yang <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Stable-dep-of: 90670ef774a8 ("ALSA: hda/realtek: Add a quirk for HP EliteDesk 805") Signed-off-by: Sasha Levin <[email protected]>
Author: Jian-Hong Pan <[email protected]> Date: Tue Mar 17 16:28:07 2020 +0800 ALSA: hda/realtek - Enable headset mic of Acer X2660G with ALC662 [ Upstream commit d858c706bdca97698752bd26b60c21ec07ef04f2 ] The Acer desktop X2660G with ALC662 can't detect the headset microphone until ALC662_FIXUP_ACER_X2660G_HEADSET_MODE quirk applied. Signed-off-by: Jian-Hong Pan <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Stable-dep-of: 90670ef774a8 ("ALSA: hda/realtek: Add a quirk for HP EliteDesk 805") Signed-off-by: Sasha Levin <[email protected]>
Author: Jian-Hong Pan <[email protected]> Date: Tue Mar 17 16:28:09 2020 +0800 ALSA: hda/realtek - Enable the headset of Acer N50-600 with ALC662 [ Upstream commit a124458a127ccd7629e20cd7bae3e1f758ed32aa ] A headset on the desktop like Acer N50-600 does not work, until quirk ALC662_FIXUP_ACER_NITRO_HEADSET_MODE is applied. Signed-off-by: Jian-Hong Pan <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Stable-dep-of: 90670ef774a8 ("ALSA: hda/realtek: Add a quirk for HP EliteDesk 805") Signed-off-by: Sasha Levin <[email protected]>
Author: Takashi Iwai <[email protected]> Date: Thu Nov 28 21:26:30 2019 +0100 ALSA: hda/realtek - Fix inverted bass GPIO pin on Acer 8951G commit 336820c4374bc065317f247dc2bb37c0e41b64a6 upstream. We've added the bass speaker support on Acer 8951G by the commit 00066e9733f6 ("Add Acer Aspire Ethos 8951G model quirk"), but it seems that the GPIO pin was wrongly set: while the commit turns off the bit to power up the amp, the actual hardware reacts other way round, i.e. GPIO bit on = amp on. So this patch fixes the bug, turning on the GPIO bit 0x02 as default. Since turning on the GPIO bit can be more easily managed with alc_setup_gpio() call, we simplify the quirk code by integrating the GPIO setup into the existing alc662_fixup_aspire_ethos_hp() and dropping the whole ALC669_FIXUP_ACER_ASPIRE_ETHOS_SUBWOOFER quirk. Fixes: 00066e9733f6 ("Add Acer Aspire Ethos 8951G model quirk") Reported-and-tested-by: Sergey 'Jin' Bostandzhyan <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Kailang Yang <[email protected]> Date: Wed Feb 5 15:40:01 2020 +0800 ALSA: hda/realtek - Fixed one of HP ALC671 platform Headset Mic supported commit f2adbae0cb20c8eaf06914b2187043ea944b0aff upstream. HP want to keep BIOS verb table for release platform. So, it need to add 0x19 pin for quirk. Fixes: 5af29028fd6d ("ALSA: hda/realtek - Add Headset Mic supported for HP cPC") Signed-off-by: Kailang Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Takashi Iwai <[email protected]> Date: Sun Jan 5 15:47:18 2020 +0100 ALSA: hda/realtek - More constifications [ Upstream commit 6b0f95c49d890440c01a759c767dfe40e2acdbf2 ] Apply const prefix to each coef table array. Just for minor optimization and no functional changes. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Stable-dep-of: 90670ef774a8 ("ALSA: hda/realtek: Add a quirk for HP EliteDesk 805") Signed-off-by: Sasha Levin <[email protected]>
Author: Jeremy Szu <[email protected]> Date: Thu Oct 8 18:56:44 2020 +0800 ALSA: hda/realtek - The front Mic on a HP machine doesn't work [ Upstream commit 148ebf548a1af366fc797fcc7d03f0bb92b12a79 ] On a HP ZCentral, the front Mic could not be detected. The codec of the HP ZCentrol is alc671 and it needs to override the pin configuration to enable the headset mic. Signed-off-by: Jeremy Szu <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Stable-dep-of: 90670ef774a8 ("ALSA: hda/realtek: Add a quirk for HP EliteDesk 805") Signed-off-by: Sasha Levin <[email protected]>
Author: Ai Chao <[email protected]> Date: Sat May 6 10:26:53 2023 +0800 ALSA: hda/realtek: Add a quirk for HP EliteDesk 805 [ Upstream commit 90670ef774a8b6700c38ce1222e6aa263be54d5f ] Add a quirk for HP EliteDesk 805 to fixup ALC3867 headset MIC no sound. Signed-off-by: Ai Chao <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hui Wang <[email protected]> Date: Tue Oct 12 19:47:48 2021 +0800 ALSA: hda/realtek: Fix the mic type detection issue for ASUS G551JW [ Upstream commit a3fd1a986e499a06ac5ef95c3a39aa4611e7444c ] We need to define the codec pin 0x1b to be the mic, but somehow the mic doesn't support hot plugging detection, and Windows also has this issue, so we set it to phantom headset-mic. Also the determine_headset_type() often returns the omtp type by a mistake when we plug a ctia headset, this makes the mic can't record sound at all. Because most of the headset are ctia type nowadays and some machines have the fixed ctia type audio jack, it is possible this machine has the fixed ctia jack too. Here we set this mic jack to fixed ctia type, this could avoid the mic type detection mistake and make the ctia headset work stable. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214537 Reported-and-tested-by: msd <[email protected]> Cc: <[email protected]> Signed-off-by: Hui Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Stable-dep-of: 90670ef774a8 ("ALSA: hda/realtek: Add a quirk for HP EliteDesk 805") Signed-off-by: Sasha Levin <[email protected]>
Author: Nikhil Mahale <[email protected]> Date: Wed May 17 14:37:36 2023 +0530 ALSA: hda: Add NVIDIA codec IDs a3 through a7 to patch table commit dc4f2ccaedddb489a83e7b12ebbdc347272aacc9 upstream. These IDs are for AD102, AD103, AD104, AD106, and AD107 gpus with audio functions that are largely similar to the existing ones. Tested audio using gnome-settings, over HDMI, DP-SST and DP-MST connections on AD106 gpu. Signed-off-by: Nikhil Mahale <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Takashi Iwai <[email protected]> Date: Tue May 16 20:44:12 2023 +0200 ALSA: hda: Fix Oops by 9.1 surround channel names commit 3b44ec8c5c44790a82f07e90db45643c762878c6 upstream. get_line_out_pfx() may trigger an Oops by overflowing the static array with more than 8 channels. This was reported for MacBookPro 12,1 with Cirrus codec. As a workaround, extend for the 9.1 channels and also fix the potential Oops by unifying the code paths accessing the same array with the proper size check. Reported-by: Olliver Schinagl <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Cezary Rojewski <[email protected]> Date: Fri May 19 22:17:07 2023 +0200 ASoC: Intel: Skylake: Fix declaration of enum skl_ch_cfg commit 95109657471311601b98e71f03d0244f48dc61bb upstream. Constant 'C4_CHANNEL' does not exist on the firmware side. Value 0xC is reserved for 'C7_1' instead. Fixes: 04afbbbb1cba ("ASoC: Intel: Skylake: Update the topology interface structure") Signed-off-by: Cezary Rojewski <[email protected]> Signed-off-by: Amadeusz Sławiński <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Min Li <[email protected]> Date: Mon Apr 17 10:27:54 2023 +0800 Bluetooth: L2CAP: fix "bad unlock balance" in l2cap_disconnect_rsp [ Upstream commit 25e97f7b1866e6b8503be349eeea44bb52d661ce ] conn->chan_lock isn't acquired before l2cap_get_chan_by_scid, if l2cap_get_chan_by_scid returns NULL, then 'bad unlock balance' is triggered. Reported-by: [email protected] Link: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Min Li <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Will Deacon <[email protected]> Date: Thu May 18 11:25:28 2023 +0100 bpf: Fix mask generation for 32-bit narrow loads of 64-bit fields commit 0613d8ca9ab382caabe9ed2dceb429e9781e443f upstream. A narrow load from a 64-bit context field results in a 64-bit load followed potentially by a 64-bit right-shift and then a bitwise AND operation to extract the relevant data. In the case of a 32-bit access, an immediate mask of 0xffffffff is used to construct a 64-bit BPP_AND operation which then sign-extends the mask value and effectively acts as a glorified no-op. For example: 0: 61 10 00 00 00 00 00 00 r0 = *(u32 *)(r1 + 0) results in the following code generation for a 64-bit field: ldr x7, [x7] // 64-bit load mov x10, #0xffffffffffffffff and x7, x7, x10 Fix the mask generation so that narrow loads always perform a 32-bit AND operation: ldr x7, [x7] // 64-bit load mov w10, #0xffffffff and w7, w7, w10 Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: John Fastabend <[email protected]> Cc: Krzesimir Nowak <[email protected]> Cc: Andrey Ignatov <[email protected]> Acked-by: Yonghong Song <[email protected]> Fixes: 31fd85816dbe ("bpf: permits narrower load from bpf program context fields") Signed-off-by: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Filipe Manana <[email protected]> Date: Thu May 4 12:04:18 2023 +0100 btrfs: fix space cache inconsistency after error loading it from disk [ Upstream commit 0004ff15ea26015a0a3a6182dca3b9d1df32e2b7 ] When loading a free space cache from disk, at __load_free_space_cache(), if we fail to insert a bitmap entry, we still increment the number of total bitmaps in the btrfs_free_space_ctl structure, which is incorrect since we failed to add the bitmap entry. On error we then empty the cache by calling __btrfs_remove_free_space_cache(), which will result in getting the total bitmaps counter set to 1. A failure to load a free space cache is not critical, so if a failure happens we just rebuild the cache by scanning the extent tree, which happens at block-group.c:caching_thread(). Yet the failure will result in having the total bitmaps of the btrfs_free_space_ctl always bigger by 1 then the number of bitmap entries we have. So fix this by having the total bitmaps counter be incremented only if we successfully added the bitmap entry. Fixes: a67509c30079 ("Btrfs: add a io_ctl struct and helpers for dealing with the space cache") Reviewed-by: Anand Jain <[email protected]> CC: [email protected] # 4.4+ Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Nikolay Borisov <[email protected]> Date: Thu Nov 26 15:10:38 2020 +0200 btrfs: replace calls to btrfs_find_free_ino with btrfs_find_free_objectid [ Upstream commit abadc1fcd72e887a8f875dabe4a07aa8c28ac8af ] The former is going away as part of the inode map removal so switch callers to btrfs_find_free_objectid. No functional changes since with INODE_MAP disabled (default) find_free_objectid was called anyway. Signed-off-by: Nikolay Borisov <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Stable-dep-of: 0004ff15ea26 ("btrfs: fix space cache inconsistency after error loading it from disk") Signed-off-by: Sasha Levin <[email protected]>
Author: Josef Bacik <[email protected]> Date: Thu May 11 12:45:59 2023 -0400 btrfs: use nofs when cleaning up aborted transactions commit 597441b3436a43011f31ce71dc0a6c0bf5ce958a upstream. Our CI system caught a lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 6.3.0-rc7+ #1167 Not tainted ------------------------------------------------------ kswapd0/46 is trying to acquire lock: ffff8c6543abd650 (sb_internal#2){++++}-{0:0}, at: btrfs_commit_inode_delayed_inode+0x5f/0x120 but task is already holding lock: ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0xa5/0xe0 kmem_cache_alloc+0x31/0x2c0 alloc_extent_state+0x1d/0xd0 __clear_extent_bit+0x2e0/0x4f0 try_release_extent_mapping+0x216/0x280 btrfs_release_folio+0x2e/0x90 invalidate_inode_pages2_range+0x397/0x470 btrfs_cleanup_dirty_bgs+0x9e/0x210 btrfs_cleanup_one_transaction+0x22/0x760 btrfs_commit_transaction+0x3b7/0x13a0 create_subvol+0x59b/0x970 btrfs_mksubvol+0x435/0x4f0 __btrfs_ioctl_snap_create+0x11e/0x1b0 btrfs_ioctl_snap_create_v2+0xbf/0x140 btrfs_ioctl+0xa45/0x28f0 __x64_sys_ioctl+0x88/0xc0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc -> #0 (sb_internal#2){++++}-{0:0}: __lock_acquire+0x1435/0x21a0 lock_acquire+0xc2/0x2b0 start_transaction+0x401/0x730 btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_evict_inode+0x292/0x3d0 evict+0xcc/0x1d0 inode_lru_isolate+0x14d/0x1e0 __list_lru_walk_one+0xbe/0x1c0 list_lru_walk_one+0x58/0x80 prune_icache_sb+0x39/0x60 super_cache_scan+0x161/0x1f0 do_shrink_slab+0x163/0x340 shrink_slab+0x1d3/0x290 shrink_node+0x300/0x720 balance_pgdat+0x35c/0x7a0 kswapd+0x205/0x410 kthread+0xf0/0x120 ret_from_fork+0x29/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(sb_internal#2); lock(fs_reclaim); lock(sb_internal#2); *** DEADLOCK *** 3 locks held by kswapd0/46: #0: ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0 #1: ffffffffabe50270 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x113/0x290 #2: ffff8c6543abd0e0 (&type->s_umount_key#44){++++}-{3:3}, at: super_cache_scan+0x38/0x1f0 stack backtrace: CPU: 0 PID: 46 Comm: kswapd0 Not tainted 6.3.0-rc7+ #1167 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x58/0x90 check_noncircular+0xd6/0x100 ? save_trace+0x3f/0x310 ? add_lock_to_list+0x97/0x120 __lock_acquire+0x1435/0x21a0 lock_acquire+0xc2/0x2b0 ? btrfs_commit_inode_delayed_inode+0x5f/0x120 start_transaction+0x401/0x730 ? btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_evict_inode+0x292/0x3d0 ? lock_release+0x134/0x270 ? __pfx_wake_bit_function+0x10/0x10 evict+0xcc/0x1d0 inode_lru_isolate+0x14d/0x1e0 __list_lru_walk_one+0xbe/0x1c0 ? __pfx_inode_lru_isolate+0x10/0x10 ? __pfx_inode_lru_isolate+0x10/0x10 list_lru_walk_one+0x58/0x80 prune_icache_sb+0x39/0x60 super_cache_scan+0x161/0x1f0 do_shrink_slab+0x163/0x340 shrink_slab+0x1d3/0x290 shrink_node+0x300/0x720 balance_pgdat+0x35c/0x7a0 kswapd+0x205/0x410 ? __pfx_autoremove_wake_function+0x10/0x10 ? __pfx_kswapd+0x10/0x10 kthread+0xf0/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 </TASK> This happens because when we abort the transaction in the transaction commit path we call invalidate_inode_pages2_range on our block group cache inodes (if we have space cache v1) and any delalloc inodes we may have. The plain invalidate_inode_pages2_range() call passes through GFP_KERNEL, which makes sense in most cases, but not here. Wrap these two invalidate callees with memalloc_nofs_save/memalloc_nofs_restore to make sure we don't end up with the fs reclaim dependency under the transaction dependency. CC: [email protected] # 4.14+ Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Christophe JAILLET <[email protected]> Date: Mon May 15 21:09:11 2023 +0200 cassini: Fix a memory leak in the error handling path of cas_init_one() [ Upstream commit 412cd77a2c24b191c65ea53025222418db09817c ] cas_saturn_firmware_init() allocates some memory using vmalloc(). This memory is freed in the .remove() function but not it the error handling path of the probe. Add the missing vfree() to avoid a memory leak, should an error occur. Fixes: fcaa40669cd7 ("cassini: use request_firmware") Signed-off-by: Christophe JAILLET <[email protected]> Reviewed-by: Pavan Chebbi <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Xiubo Li <[email protected]> Date: Thu May 18 09:47:23 2023 +0800 ceph: force updating the msg pointer in non-split case commit 4cafd0400bcb6187c0d4ab4d4b0229a89ac4f8c2 upstream. When the MClientSnap reqeust's op is not CEPH_SNAP_OP_SPLIT the request may still contain a list of 'split_realms', and we need to skip it anyway. Or it will be parsed as a corrupt snaptrace. Cc: [email protected] Link: https://tracker.ceph.com/issues/61200 Reported-by: Frank Schilder <[email protected]> Signed-off-by: Xiubo Li <[email protected]> Reviewed-by: Ilya Dryomov <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Arnd Bergmann <[email protected]> Date: Mon Feb 27 09:59:10 2023 +0100 clk: tegra20: fix gcc-7 constant overflow warning [ Upstream commit b4a2adbf3586efa12fe78b9dec047423e01f3010 ] Older gcc versions get confused by comparing a u32 value to a negative constant in a switch()/case block: drivers/clk/tegra/clk-tegra20.c: In function 'tegra20_clk_measure_input_freq': drivers/clk/tegra/clk-tegra20.c:581:2: error: case label does not reduce to an integer constant case OSC_CTRL_OSC_FREQ_12MHZ: ^~~~ drivers/clk/tegra/clk-tegra20.c:593:2: error: case label does not reduce to an integer constant case OSC_CTRL_OSC_FREQ_26MHZ: Make the constants unsigned instead. Signed-off-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dan Carpenter <[email protected]> Date: Fri Apr 21 13:42:41 2023 +0300 coresight: Fix signedness bug in tmc_etr_buf_insert_barrier_packet() commit f67bc15e526bb9920683ad6c1891ff9e08981335 upstream. This code generates a Smatch warning: drivers/hwtracing/coresight/coresight-tmc-etr.c:947 tmc_etr_buf_insert_barrier_packet() error: uninitialized symbol 'bufp'. The problem is that if tmc_sg_table_get_data() returns -EINVAL, then when we test if "len < CORESIGHT_BARRIER_PKT_SIZE", the negative "len" value is type promoted to a high unsigned long value which is greater than CORESIGHT_BARRIER_PKT_SIZE. Fix this bug by adding an explicit check for error codes. Fixes: 75f4e3619fe2 ("coresight: tmc-etr: Add transparent buffer management") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Suzuki K Poulose <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Wyes Karny <[email protected]> Date: Thu May 4 06:25:44 2023 +0000 cpupower: Make TSC read per CPU for Mperf monitor [ Upstream commit c2adb1877b76fc81ae041e1db1a6ed2078c6746b ] System-wide TSC read could cause a drift in C0 percentage calculation. Because if first TSC is read and then one by one mperf is read for all cpus, this introduces drift between mperf reading of later CPUs and TSC reading. To lower this drift read TSC per CPU and also just after mperf read. This technique improves C0 percentage calculation in Mperf monitor. Before fix: (System 100% busy) | Mperf || RAPL || Idle_Stats PKG|CORE| CPU| C0 | Cx | Freq || pack | core || POLL | C1 | C2 0| 0| 0| 87.15| 12.85| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 0| 256| 84.62| 15.38| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 1| 1| 87.15| 12.85| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 1| 257| 84.08| 15.92| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 2| 2| 86.61| 13.39| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 2| 258| 83.26| 16.74| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 3| 3| 86.61| 13.39| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 3| 259| 83.60| 16.40| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 4| 4| 86.33| 13.67| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 4| 260| 83.33| 16.67| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 5| 5| 86.06| 13.94| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 5| 261| 83.05| 16.95| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 6| 6| 85.51| 14.49| 2695||168659003|3970468|| 0.00| 0.00| 0.00 After fix: (System 100% busy) | Mperf || RAPL || Idle_Stats PKG|CORE| CPU| C0 | Cx | Freq || pack | core || POLL | C1 | C2 0| 0| 0| 98.03| 1.97| 2415||163295480|3811189|| 0.00| 0.00| 0.00 0| 0| 256| 98.50| 1.50| 2394||163295480|3811189|| 0.00| 0.00| 0.00 0| 1| 1| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 1| 257| 99.99| 0.01| 2375||163295480|3811189|| 0.00| 0.00| 0.00 0| 2| 2| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 2| 258|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 3| 3|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 3| 259| 99.99| 0.01| 2435||163295480|3811189|| 0.00| 0.00| 0.00 0| 4| 4|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 4| 260|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00 0| 5| 5| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 5| 261|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00 0| 6| 6|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 6| 262|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00 Cc: Thomas Renninger <[email protected]> Cc: Shuah Khan <[email protected]> Cc: Dominik Brodowski <[email protected]> Fixes: 7fe2f6399a84 ("cpupowerutils - cpufrequtils extended with quite some features") Signed-off-by: Wyes Karny <[email protected]> Signed-off-by: Shuah Khan <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Bartosz Golaszewski <[email protected]> Date: Thu Feb 21 17:26:27 2019 +0100 drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource() commit 837ccda3480d2861c09aabc5fa014be18df9dd3c upstream. We only build devm_ioremap_resource() if HAS_IOMEM is selected, so this dependency must cascade down to devm_platform_ioremap_resource(). Signed-off-by: Bartosz Golaszewski <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Cc: Guenter Roeck <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Bartosz Golaszewski <[email protected]> Date: Wed Feb 20 11:12:39 2019 +0000 drivers: provide devm_platform_ioremap_resource() [ Upstream commit 7945f929f1a77a1c8887a97ca07f87626858ff42 ] There are currently 1200+ instances of using platform_get_resource() and devm_ioremap_resource() together in the kernel tree. This patch wraps these two calls in a single helper. Thanks to that we don't have to declare a local variable for struct resource * and can omit the redundant argument for resource type. We also have one function call less. Signed-off-by: Bartosz Golaszewski <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Stable-dep-of: 8ab5fc55d7f6 ("serial: arc_uart: fix of_iomap leak in `arc_serial_probe`") Signed-off-by: Sasha Levin <[email protected]>
Author: Rodrigo Siqueira <[email protected]> Date: Tue Nov 1 10:20:09 2022 -0400 drm/amd/display: Use DC_LOG_DC in the trasform pixel function [ Upstream commit 7222f5841ff49709ca666b05ff336776e0664a20 ] [Why & How] DC now uses a new commit sequence which is more robust since it addresses cases where we need to reorganize pipes based on planes and other parameters. As a result, this new commit sequence reset the DC state by cleaning plane states and re-creating them accordingly with the need. For this reason, the dce_transform_set_pixel_storage_depth can be invoked after a plane state is destroyed and before its re-creation. In this situation and on DCE devices, DC will hit a condition that will trigger a dmesg log that looks like this: Console: switching to colour frame buffer device 240x67 ------------[ cut here ]------------ [..] Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 5603 07/28/2020 RIP: 0010:dce_transform_set_pixel_storage_depth+0x3f8/0x480 [amdgpu] [..] RSP: 0018:ffffc9000202b850 EFLAGS: 00010293 RAX: ffffffffa081d100 RBX: ffff888110790000 RCX: 000000000000000c RDX: ffff888100bedbf8 RSI: 0000000000001a50 RDI: ffff88810463c900 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000007 R10: 0000000000000001 R11: 0000000000000f00 R12: ffff88810f500010 R13: ffff888100bedbf8 R14: ffff88810f515688 R15: 0000000000000000 FS: 00007ff0159249c0(0000) GS:ffff88840e940000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff01528e550 CR3: 0000000002a10000 CR4: 00000000003506e0 Call Trace: <TASK> ? dm_write_reg_func+0x21/0x80 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] dc_stream_set_dither_option+0xfb/0x130 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] amdgpu_dm_crtc_configure_crc_source+0x10b/0x190 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] amdgpu_dm_atomic_commit_tail+0x20a8/0x2a90 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] ? free_unref_page_commit+0x98/0x170 ? free_unref_page+0xcc/0x150 commit_tail+0x94/0x120 drm_atomic_helper_commit+0x10f/0x140 drm_atomic_commit+0x94/0xc0 ? drm_plane_get_damage_clips.cold+0x1c/0x1c drm_client_modeset_commit_atomic+0x203/0x250 drm_client_modeset_commit_locked+0x56/0x150 drm_client_modeset_commit+0x21/0x40 drm_fb_helper_lastclose+0x42/0x70 amdgpu_driver_lastclose_kms+0xa/0x10 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] drm_release+0xda/0x110 __fput+0x89/0x240 task_work_run+0x5c/0x90 do_exit+0x333/0xae0 do_group_exit+0x2d/0x90 __x64_sys_exit_group+0x14/0x20 do_syscall_64+0x5b/0x80 ? exit_to_user_mode_prepare+0x1e/0x140 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7ff016ceaca1 Code: Unable to access opcode bytes at RIP 0x7ff016ceac77. RSP: 002b:00007ffe7a2357e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 00007ff016e15a00 RCX: 00007ff016ceaca1 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffffffffffffff78 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ff016e15a00 R13: 0000000000000000 R14: 00007ff016e1aee8 R15: 00007ff016e1af00 </TASK> Since this issue only happens in a transition state on DC, this commit replace BREAK_TO_DEBUGGER with DC_LOG_DC. Reviewed-by: Harry Wentland <[email protected]> Acked-by: Qingqing Zhuo <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Arnd Bergmann <[email protected]> Date: Mon Apr 17 23:04:11 2023 +0200 drm/exynos: fix g2d_open/close helper function definitions [ Upstream commit 2ef0785b30bd6549ddbc124979f1b6596e065ae2 ] The empty stub functions are defined as global functions, which causes a warning because of missing prototypes: drivers/gpu/drm/exynos/exynos_drm_g2d.h:37:5: error: no previous prototype for 'g2d_open' drivers/gpu/drm/exynos/exynos_drm_g2d.h:42:5: error: no previous prototype for 'g2d_close' Mark them as 'static inline' to avoid the warning and to make them behave as intended. Fixes: eb4d9796fa34 ("drm/exynos: g2d: Convert to driver component API") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Andi Shyti <[email protected]> Signed-off-by: Inki Dae <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Nur Hussein <[email protected]> Date: Thu Apr 6 04:25:59 2023 +0800 drm/tegra: Avoid potential 32-bit integer overflow [ Upstream commit 2429b3c529da29d4277d519bd66d034842dcd70c ] In tegra_sor_compute_config(), the 32-bit value mode->clock is multiplied by 1000, and assigned to the u64 variable pclk. We can avoid a potential 32-bit integer overflow by casting mode->clock to u64 before we do the arithmetic and assignment. Signed-off-by: Nur Hussein <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Xin Long <[email protected]> Date: Thu May 11 19:22:11 2023 -0400 erspan: get the proto with the md version for collect_md [ Upstream commit d80fc101d2eb9b3188c228d61223890aeea480a4 ] In commit 20704bd1633d ("erspan: build the header with the right proto according to erspan_ver"), it gets the proto with t->parms.erspan_ver, but t->parms.erspan_ver is not used by collect_md branch, and instead it should get the proto with md->version for collect_md. Thanks to Kevin for pointing this out. Fixes: 20704bd1633d ("erspan: build the header with the right proto according to erspan_ver") Fixes: 94d7d8f29287 ("ip6_gre: add erspan v2 support") Reported-by: Kevin Traynor <[email protected]> Signed-off-by: Xin Long <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: William Tu <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jan Kara <[email protected]> Date: Wed Mar 1 11:59:39 2023 +0100 ext2: Check block size validity during mount [ Upstream commit 62aeb94433fcec80241754b70d0d1836d5926b0a ] Check that log of block size stored in the superblock has sensible value. Otherwise the shift computing the block size can overflow leading to undefined behavior. Reported-by: [email protected] Signed-off-by: Jan Kara <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ojaswin Mujoo <[email protected]> Date: Sat Mar 25 13:43:39 2023 +0530 ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa() [ Upstream commit 93cdf49f6eca5e23f6546b8f28457b2e6a6961d9 ] When the length of best extent found is less than the length of goal extent we need to make sure that the best extent atleast covers the start of the original request. This is done by adjusting the ac_b_ex.fe_logical (logical start) of the extent. While doing so, the current logic sometimes results in the best extent's logical range overflowing the goal extent. Since this best extent is later added to the inode preallocation list, we have a possibility of introducing overlapping preallocations. This is discussed in detail here [1]. As per Jan's suggestion, to fix this, replace the existing logic with the below logic for adjusting best extent as it keeps fragmentation in check while ensuring logical range of best extent doesn't overflow out of goal extent: 1. Check if best extent can be kept at end of goal range and still cover original start. 2. Else, check if best extent can be kept at start of goal range and still cover original start. 3. Else, keep the best extent at start of original request. Also, add a few extra BUG_ONs that might help catch errors faster. [1] https://lore.kernel.org/r/[email protected] Suggested-by: Jan Kara <[email protected]> Signed-off-by: Ojaswin Mujoo <[email protected]> Reviewed-by: Ritesh Harjani (IBM) <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://lore.kernel.org/r/f96aca6d415b36d1f90db86c1a8cd7e2e9d7ab0e.1679731817.git.ojaswin@linux.ibm.com Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kemeng Shi <[email protected]> Date: Sat Mar 4 01:21:01 2023 +0800 ext4: set goal start correctly in ext4_mb_normalize_request [ Upstream commit b07ffe6927c75d99af534d685282ea188d9f71a6 ] We need to set ac_g_ex to notify the goal start used in ext4_mb_find_by_goal. Set ac_g_ex instead of ac_f_ex in ext4_mb_normalize_request. Besides we should assure goal start is in range [first_data_block, blocks_count) as ext4_mb_initialize_context does. [ Added a check to make sure size is less than ar->pright; otherwise we could end up passing an underflowed value of ar->pright - size to ext4_get_group_no_and_offset(), which will trigger a BUG_ON later on. - TYT ] Signed-off-by: Kemeng Shi <[email protected]> Reviewed-by: Ritesh Harjani (IBM) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Chao Yu <[email protected]> Date: Mon Apr 10 10:12:22 2023 +0800 f2fs: fix to drop all dirty pages during umount() if cp_error is set [ Upstream commit c9b3649a934d131151111354bcbb638076f03a30 ] xfstest generic/361 reports a bug as below: f2fs_bug_on(sbi, sbi->fsync_node_num); kernel BUG at fs/f2fs/super.c:1627! RIP: 0010:f2fs_put_super+0x3a8/0x3b0 Call Trace: generic_shutdown_super+0x8c/0x1b0 kill_block_super+0x2b/0x60 kill_f2fs_super+0x87/0x110 deactivate_locked_super+0x39/0x80 deactivate_super+0x46/0x50 cleanup_mnt+0x109/0x170 __cleanup_mnt+0x16/0x20 task_work_run+0x65/0xa0 exit_to_user_mode_prepare+0x175/0x190 syscall_exit_to_user_mode+0x25/0x50 do_syscall_64+0x4c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc During umount(), if cp_error is set, f2fs_wait_on_all_pages() should not stop waiting all F2FS_WB_CP_DATA pages to be writebacked, otherwise, fsync_node_num can be non-zero after f2fs_wait_on_all_pages() causing this bug. In this case, to avoid deadloop in f2fs_wait_on_all_pages(), it needs to drop all dirty pages rather than redirtying them. Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Pierre Gondois <[email protected]> Date: Thu Feb 16 09:49:19 2023 +0100 firmware: arm_sdei: Fix sleep from invalid context BUG [ Upstream commit d2c48b2387eb89e0bf2a2e06e30987cf410acad4 ] Running a preempt-rt (v6.2-rc3-rt1) based kernel on an Ampere Altra triggers: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 24, name: cpuhp/0 preempt_count: 0, expected: 0 RCU nest depth: 0, expected: 0 3 locks held by cpuhp/0/24: #0: ffffda30217c70d0 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248 #1: ffffda30217c7120 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248 #2: ffffda3021c711f0 (sdei_list_lock){....}-{3:3}, at: sdei_cpuhp_up+0x3c/0x130 irq event stamp: 36 hardirqs last enabled at (35): [<ffffda301e85b7bc>] finish_task_switch+0xb4/0x2b0 hardirqs last disabled at (36): [<ffffda301e812fec>] cpuhp_thread_fun+0x21c/0x248 softirqs last enabled at (0): [<ffffda301e80b184>] copy_process+0x63c/0x1ac0 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 0 PID: 24 Comm: cpuhp/0 Not tainted 5.19.0-rc3-rt5-[...] Hardware name: WIWYNN Mt.Jade Server [...] Call trace: dump_backtrace+0x114/0x120 show_stack+0x20/0x70 dump_stack_lvl+0x9c/0xd8 dump_stack+0x18/0x34 __might_resched+0x188/0x228 rt_spin_lock+0x70/0x120 sdei_cpuhp_up+0x3c/0x130 cpuhp_invoke_callback+0x250/0xf08 cpuhp_thread_fun+0x120/0x248 smpboot_thread_fn+0x280/0x320 kthread+0x130/0x140 ret_from_fork+0x10/0x20 sdei_cpuhp_up() is called in the STARTING hotplug section, which runs with interrupts disabled. Use a CPUHP_AP_ONLINE_DYN entry instead to execute the cpuhp cb later, with preemption enabled. SDEI originally got its own cpuhp slot to allow interacting with perf. It got superseded by pNMI and this early slot is not relevant anymore. [1] Some SDEI calls (e.g. SDEI_1_0_FN_SDEI_PE_MASK) take actions on the calling CPU. It is checked that preemption is disabled for them. _ONLINE cpuhp cb are executed in the 'per CPU hotplug thread'. Preemption is enabled in those threads, but their cpumask is limited to 1 CPU. Move 'WARN_ON_ONCE(preemptible())' statements so that SDEI cpuhp cb don't trigger them. Also add a check for the SDEI_1_0_FN_SDEI_PRIVATE_RESET SDEI call which acts on the calling CPU. [1]: https://lore.kernel.org/all/[email protected]/ Suggested-by: James Morse <[email protected]> Signed-off-by: Pierre Gondois <[email protected]> Reviewed-by: James Morse <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Christophe JAILLET <[email protected]> Date: Sat May 20 10:30:17 2023 +0200 forcedeth: Fix an error handling path in nv_probe() commit 5b17a4971d3b2a073f4078dd65331efbe35baa2d upstream. If an error occures after calling nv_mgmt_acquire_sema(), it should be undone with a corresponding nv_mgmt_release_sema() call. Add it in the error handling path of the probe as already done in the remove function. Fixes: cac1c52c3621 ("forcedeth: mgmt unit interface") Signed-off-by: Christophe JAILLET <[email protected]> Acked-by: Zhu Yanjun <[email protected]> Link: https://lore.kernel.org/r/355e9a7d351b32ad897251b6f81b5886fcdc6766.1684571393.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Tetsuo Handa <[email protected]> Date: Tue Apr 11 19:57:33 2023 +0900 fs: hfsplus: remove WARN_ON() from hfsplus_cat_{read,write}_inode() [ Upstream commit 81b21c0f0138ff5a499eafc3eb0578ad2a99622c ] syzbot is hitting WARN_ON() in hfsplus_cat_{read,write}_inode(), for crafted filesystem image can contain bogus length. There conditions are not kernel bugs that can justify kernel to panic. Reported-by: syzbot <[email protected]> Link: https://syzkaller.appspot.com/bug?extid=e2787430e752a92b8750 Reported-by: syzbot <[email protected]> Link: https://syzkaller.appspot.com/bug?extid=4913dca2ea6e4d43f3f1 Signed-off-by: Tetsuo Handa <[email protected]> Reviewed-by: Viacheslav Dubeyko <[email protected]> Message-Id: <[email protected]> Signed-off-by: Christian Brauner <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Andreas Gruenbacher <[email protected]> Date: Tue Mar 28 00:43:16 2023 +0200 gfs2: Fix inode height consistency check [ Upstream commit cfcdb5bad34f600aed7613c3c1a5e618111f77b7 ] The maximum allowed height of an inode's metadata tree depends on the filesystem block size; it is lower for bigger-block filesystems. When reading in an inode, make sure that the height doesn't exceed the maximum allowed height. Arrays like sd_heightsize are sized to be big enough for any filesystem block size; they will often be slightly bigger than what's needed for a specific filesystem. Reported-by: [email protected] Signed-off-by: Andreas Gruenbacher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Bastien Nocera <[email protected]> Date: Thu Mar 2 14:01:16 2023 +0100 HID: logitech-hidpp: Don't use the USB serial for USB devices [ Upstream commit 7ad1fe0da0fa91bf920b79ab05ae97bfabecc4f4 ] For devices that support the 0x0003 feature (Device Information) version 4, set the serial based on the output of that feature, rather than relying on the usbhid code setting the USB serial. This should allow the serial when connected through USB to (nearly) match the one when connected through a unifying receiver. For example, on the serials on a G903 wired/wireless mouse: - Unifying: 4067-e8-ce-cd-45 - USB before patch: 017C385C3837 - USB after patch: c086-e8-ce-cd-45 Signed-off-by: Bastien Nocera <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Bastien Nocera <[email protected]> Date: Thu Mar 2 14:01:17 2023 +0100 HID: logitech-hidpp: Reconcile USB and Unifying serials [ Upstream commit 5b3691d15e04b6d5a32c915577b8dbc5cfb56382 ] Now that USB HID++ devices can gather a serial number that matches the one that would be gathered when connected through a Unifying receiver, remove the last difference by dropping the product ID as devices usually have different product IDs when connected through USB or Unifying. For example, on the serials on a G903 wired/wireless mouse: - Unifying before patch: 4067-e8-ce-cd-45 - USB before patch: c086-e8-ce-cd-45 - Unifying and USB after patch: e8-ce-cd-45 Signed-off-by: Bastien Nocera <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jason Gerecke <[email protected]> Date: Fri Jul 15 16:05:19 2022 -0700 HID: wacom: Force pen out of prox if no events have been received in a while commit 94b179052f95c294d83e9c9c34f7833cf3cd4305 upstream. Prox-out events may not be reliably sent by some AES firmware. This can cause problems for users, particularly due to arbitration logic disabling touch input while the pen is in prox. This commit adds a timer which is reset every time a new prox event is received. When the timer expires we check to see if the pen is still in prox and force it out if necessary. This is patterend off of the same solution used by 'hid-letsketch' driver which has a similar problem. Link: https://github.com/linuxwacom/input-wacom/issues/310 Signed-off-by: Jason Gerecke <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Cc: Ping Cheng <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jason Gerecke <[email protected]> Date: Thu Apr 13 11:17:43 2023 -0700 HID: wacom: generic: Set battery quirk only when we see battery data [ Upstream commit bea407a427baa019758f29f4d31b26f008bb8cc6 ] Some devices will include battery status usages in the HID descriptor but we won't see that battery data for one reason or another. For example, AES sensors won't send battery data unless an AES pen is in proximity. If a user does not have an AES pen but instead only interacts with the AES touchscreen with their fingers then there is no need for us to create a battery object. Similarly, if a family of peripherals shares the same HID descriptor between wired-only and wireless-capable SKUs, users of the former may never see a battery event and will not want a power_supply object created. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217062 Link: https://gitlab.gnome.org/GNOME/gnome-control-center/-/issues/2354 Signed-off-by: Jason Gerecke <[email protected]> Tested-by: Mario Limonciello <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Aleksandr Loktionov <[email protected]> Date: Tue May 16 10:41:46 2023 -0700 igb: fix bit_shift to be in [1..8] range [ Upstream commit 60d758659f1fb49e0d5b6ac2691ede8c0958795b ] In igb_hash_mc_addr() the expression: "mc_addr[4] >> 8 - bit_shift", right shifting "mc_addr[4]" shift by more than 7 bits always yields zero, so hash becomes not so different. Add initialization with bit_shift = 1 and add a loop condition to ensure bit_shift will be always in [1..8] range. Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by: Aleksandr Loktionov <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Vicki Pfau <[email protected]> Date: Thu Apr 13 23:57:42 2023 -0700 Input: xpad - add constants for GIP interface numbers [ Upstream commit f9b2e603c6216824e34dc9a67205d98ccc9a41ca ] Wired GIP devices present multiple interfaces with the same USB identification other than the interface number. This adds constants for differentiating two of them and uses them where appropriate Signed-off-by: Vicki Pfau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Peilin Ye <[email protected]> Date: Thu Apr 14 13:35:40 2022 -0700 ip6_gre: Fix skb_under_panic in __gre6_xmit() [ Upstream commit ab198e1d0dd8dc4bc7575fb50758e2cbd51e14e1 ] Feng reported an skb_under_panic BUG triggered by running test_ip6gretap() in tools/testing/selftests/bpf/test_tunnel.sh: [ 82.492551] skbuff: skb_under_panic: text:ffffffffb268bb8e len:403 put:12 head:ffff9997c5480000 data:ffff9997c547fff8 tail:0x18b end:0x2c0 dev:ip6gretap11 <...> [ 82.607380] Call Trace: [ 82.609389] <TASK> [ 82.611136] skb_push.cold.109+0x10/0x10 [ 82.614289] __gre6_xmit+0x41e/0x590 [ 82.617169] ip6gre_tunnel_xmit+0x344/0x3f0 [ 82.620526] dev_hard_start_xmit+0xf1/0x330 [ 82.623882] sch_direct_xmit+0xe4/0x250 [ 82.626961] __dev_queue_xmit+0x720/0xfe0 <...> [ 82.633431] packet_sendmsg+0x96a/0x1cb0 [ 82.636568] sock_sendmsg+0x30/0x40 <...> The following sequence of events caused the BUG: 1. During ip6gretap device initialization, tunnel->tun_hlen (e.g. 4) is calculated based on old flags (see ip6gre_calc_hlen()); 2. packet_snd() reserves header room for skb A, assuming tunnel->tun_hlen is 4; 3. Later (in clsact Qdisc), the eBPF program sets a new tunnel key for skb A using bpf_skb_set_tunnel_key() (see _ip6gretap_set_tunnel()); 4. __gre6_xmit() detects the new tunnel key, and recalculates "tun_hlen" (e.g. 12) based on new flags (e.g. TUNNEL_KEY and TUNNEL_SEQ); 5. gre_build_header() calls skb_push() with insufficient reserved header room, triggering the BUG. As sugguested by Cong, fix it by moving the call to skb_cow_head() after the recalculation of tun_hlen. Reproducer: OBJ=$LINUX/tools/testing/selftests/bpf/test_tunnel_kern.o ip netns add at_ns0 ip link add veth0 type veth peer name veth1 ip link set veth0 netns at_ns0 ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0 ip netns exec at_ns0 ip link set dev veth0 up ip link set dev veth1 up mtu 1500 ip addr add dev veth1 172.16.1.200/24 ip netns exec at_ns0 ip addr add ::11/96 dev veth0 ip netns exec at_ns0 ip link set dev veth0 up ip addr add dev veth1 ::22/96 ip link set dev veth1 up ip netns exec at_ns0 \ ip link add dev ip6gretap00 type ip6gretap seq flowlabel 0xbcdef key 2 \ local ::11 remote ::22 ip netns exec at_ns0 ip addr add dev ip6gretap00 10.1.1.100/24 ip netns exec at_ns0 ip addr add dev ip6gretap00 fc80::100/96 ip netns exec at_ns0 ip link set dev ip6gretap00 up ip link add dev ip6gretap11 type ip6gretap external ip addr add dev ip6gretap11 10.1.1.200/24 ip addr add dev ip6gretap11 fc80::200/24 ip link set dev ip6gretap11 up tc qdisc add dev ip6gretap11 clsact tc filter add dev ip6gretap11 egress bpf da obj $OBJ sec ip6gretap_set_tunnel tc filter add dev ip6gretap11 ingress bpf da obj $OBJ sec ip6gretap_get_tunnel ping6 -c 3 -w 10 -q ::11 Fixes: 6712abc168eb ("ip6_gre: add ip6 gre and gretap collect_md mode") Reported-by: Feng Zhou <[email protected]> Co-developed-by: Cong Wang <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: Peilin Ye <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Peilin Ye <[email protected]> Date: Thu Apr 21 15:08:38 2022 -0700 ip6_gre: Make o_seqno start from 0 in native mode [ Upstream commit fde98ae91f79cab4e020f40c35ed23cbdc59661c ] For IP6GRE and IP6GRETAP devices, currently o_seqno starts from 1 in native mode. According to RFC 2890 2.2., "The first datagram is sent with a sequence number of 0." Fix it. It is worth mentioning that o_seqno already starts from 0 in collect_md mode, see the "if (tunnel->parms.collect_md)" clause in __gre6_xmit(), where tunnel->o_seqno is passed to gre_build_header() before getting incremented. Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Signed-off-by: Peilin Ye <[email protected]> Acked-by: William Tu <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Peilin Ye <[email protected]> Date: Thu Apr 21 15:09:02 2022 -0700 ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md mode [ Upstream commit 31c417c948d7f6909cb63f0ac3298f3c38f8ce20 ] As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in collect_md mode is racy for [IP6]GRE[TAP] devices. Consider the following sequence of events: 1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link add ... external". "ip" ignores "[o]seq" if "external" is specified, so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e. it uses lockless TX); 2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g. bpf_skb_set_tunnel_key() in an eBPF program attached to this device; 3. gre_fb_xmit() or __gre6_xmit() processes these skb's: gre_build_header(skb, tun_hlen, flags, protocol, tunnel_id_to_key32(tun_info->key.tun_id), (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0); ^^^^^^^^^^^^^^^^^ Since we are not using the TX lock (&txq->_xmit_lock), multiple CPUs may try to do this tunnel->o_seqno++ in parallel, which is racy. Fix it by making o_seqno atomic_t. As mentioned by Eric Dumazet in commit b790e01aee74 ("ip_gre: lockless xmit"), making o_seqno atomic_t increases "chance for packets being out of order at receiver" when NETIF_F_LLTX is on. Maybe a better fix would be: 1. Do not ignore "oseq" in external mode. Users MUST specify "oseq" if they want the kernel to allow sequencing of outgoing packets; 2. Reject all outgoing TUNNEL_SEQ packets if the device was not created with "oseq". Unfortunately, that would break userspace. We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us do it in separate patches to keep this fix minimal. Suggested-by: Jakub Kicinski <[email protected]> Fixes: 77a5196a804e ("gre: add sequence number for collect md mode.") Signed-off-by: Peilin Ye <[email protected]> Acked-by: William Tu <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Gavrilov Ilia <[email protected]> Date: Tue May 23 08:29:44 2023 +0000 ipv6: Fix out-of-bounds access in ipv6_find_tlv() commit 878ecb0897f4737a4c9401f3523fd49589025671 upstream. optlen is fetched without checking whether there is more than one byte to parse. It can lead to out-of-bounds access. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE. Fixes: c61a40432509 ("[IPV6]: Find option offset by type.") Signed-off-by: Gavrilov Ilia <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: t.feng <[email protected]> Date: Wed May 10 11:50:44 2023 +0800 ipvlan:Fix out-of-bounds caused by unclear skb->cb [ Upstream commit 90cbed5247439a966b645b34eb0a2e037836ea8e ] If skb enqueue the qdisc, fq_skb_cb(skb)->time_to_send is changed which is actually skb->cb, and IPCB(skb_in)->opt will be used in __ip_options_echo. It is possible that memcpy is out of bounds and lead to stack overflow. We should clear skb->cb before ip_local_out or ip6_local_out. v2: 1. clean the stack info 2. use IPCB/IP6CB instead of skb->cb crash on stable-5.10(reproduce in kasan kernel). Stack info: [ 2203.651571] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x589/0x800 [ 2203.653327] Write of size 4 at addr ffff88811a388f27 by task swapper/3/0 [ 2203.655460] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.10.0-60.18.0.50.h856.kasan.eulerosv2r11.x86_64 #1 [ 2203.655466] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-20181220_000000-szxrtosci10000 04/01/2014 [ 2203.655475] Call Trace: [ 2203.655481] <IRQ> [ 2203.655501] dump_stack+0x9c/0xd3 [ 2203.655514] print_address_description.constprop.0+0x19/0x170 [ 2203.655530] __kasan_report.cold+0x6c/0x84 [ 2203.655586] kasan_report+0x3a/0x50 [ 2203.655594] check_memory_region+0xfd/0x1f0 [ 2203.655601] memcpy+0x39/0x60 [ 2203.655608] __ip_options_echo+0x589/0x800 [ 2203.655654] __icmp_send+0x59a/0x960 [ 2203.655755] nf_send_unreach+0x129/0x3d0 [nf_reject_ipv4] [ 2203.655763] reject_tg+0x77/0x1bf [ipt_REJECT] [ 2203.655772] ipt_do_table+0x691/0xa40 [ip_tables] [ 2203.655821] nf_hook_slow+0x69/0x100 [ 2203.655828] __ip_local_out+0x21e/0x2b0 [ 2203.655857] ip_local_out+0x28/0x90 [ 2203.655868] ipvlan_process_v4_outbound+0x21e/0x260 [ipvlan] [ 2203.655931] ipvlan_xmit_mode_l3+0x3bd/0x400 [ipvlan] [ 2203.655967] ipvlan_queue_xmit+0xb3/0x190 [ipvlan] [ 2203.655977] ipvlan_start_xmit+0x2e/0xb0 [ipvlan] [ 2203.655984] xmit_one.constprop.0+0xe1/0x280 [ 2203.655992] dev_hard_start_xmit+0x62/0x100 [ 2203.656000] sch_direct_xmit+0x215/0x640 [ 2203.656028] __qdisc_run+0x153/0x1f0 [ 2203.656069] __dev_queue_xmit+0x77f/0x1030 [ 2203.656173] ip_finish_output2+0x59b/0xc20 [ 2203.656244] __ip_finish_output.part.0+0x318/0x3d0 [ 2203.656312] ip_finish_output+0x168/0x190 [ 2203.656320] ip_output+0x12d/0x220 [ 2203.656357] __ip_queue_xmit+0x392/0x880 [ 2203.656380] __tcp_transmit_skb+0x1088/0x11c0 [ 2203.656436] __tcp_retransmit_skb+0x475/0xa30 [ 2203.656505] tcp_retransmit_skb+0x2d/0x190 [ 2203.656512] tcp_retransmit_timer+0x3af/0x9a0 [ 2203.656519] tcp_write_timer_handler+0x3ba/0x510 [ 2203.656529] tcp_write_timer+0x55/0x180 [ 2203.656542] call_timer_fn+0x3f/0x1d0 [ 2203.656555] expire_timers+0x160/0x200 [ 2203.656562] run_timer_softirq+0x1f4/0x480 [ 2203.656606] __do_softirq+0xfd/0x402 [ 2203.656613] asm_call_irq_on_stack+0x12/0x20 [ 2203.656617] </IRQ> [ 2203.656623] do_softirq_own_stack+0x37/0x50 [ 2203.656631] irq_exit_rcu+0x134/0x1a0 [ 2203.656639] sysvec_apic_timer_interrupt+0x36/0x80 [ 2203.656646] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 2203.656654] RIP: 0010:default_idle+0x13/0x20 [ 2203.656663] Code: 89 f0 5d 41 5c 41 5d 41 5e c3 cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 0f 1f 44 00 00 0f 00 2d 9f 32 57 00 fb f4 <c3> cc cc cc cc 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 be 08 [ 2203.656668] RSP: 0018:ffff88810036fe78 EFLAGS: 00000256 [ 2203.656676] RAX: ffffffffaf2a87f0 RBX: ffff888100360000 RCX: ffffffffaf290191 [ 2203.656681] RDX: 0000000000098b5e RSI: 0000000000000004 RDI: ffff88811a3c4f60 [ 2203.656686] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff88811a3c4f63 [ 2203.656690] R10: ffffed10234789ec R11: 0000000000000001 R12: 0000000000000003 [ 2203.656695] R13: ffff888100360000 R14: 0000000000000000 R15: 0000000000000000 [ 2203.656729] default_idle_call+0x5a/0x150 [ 2203.656735] cpuidle_idle_call+0x1c6/0x220 [ 2203.656780] do_idle+0xab/0x100 [ 2203.656786] cpu_startup_entry+0x19/0x20 [ 2203.656793] secondary_startup_64_no_verify+0xc2/0xcb [ 2203.657409] The buggy address belongs to the page: [ 2203.658648] page:0000000027a9842f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11a388 [ 2203.658665] flags: 0x17ffffc0001000(reserved|node=0|zone=2|lastcpupid=0x1fffff) [ 2203.658675] raw: 0017ffffc0001000 ffffea000468e208 ffffea000468e208 0000000000000000 [ 2203.658682] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 2203.658686] page dumped because: kasan: bad access detected To reproduce(ipvlan with IPVLAN_MODE_L3): Env setting: ======================================================= modprobe ipvlan ipvlan_default_mode=1 sysctl net.ipv4.conf.eth0.forwarding=1 iptables -t nat -A POSTROUTING -s 20.0.0.0/255.255.255.0 -o eth0 -j MASQUERADE ip link add gw link eth0 type ipvlan ip -4 addr add 20.0.0.254/24 dev gw ip netns add net1 ip link add ipv1 link eth0 type ipvlan ip link set ipv1 netns net1 ip netns exec net1 ip link set ipv1 up ip netns exec net1 ip -4 addr add 20.0.0.4/24 dev ipv1 ip netns exec net1 route add default gw 20.0.0.254 ip netns exec net1 tc qdisc add dev ipv1 root netem loss 10% ifconfig gw up iptables -t filter -A OUTPUT -p tcp --dport 8888 -j REJECT --reject-with icmp-port-unreachable ======================================================= And then excute the shell(curl any address of eth0 can reach): for((i=1;i<=100000;i++)) do ip netns exec net1 curl x.x.x.x:8888 done ======================================================= Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: "t.feng" <[email protected]> Suggested-by: Florian Westphal <[email protected]> Reviewed-by: Paolo Abeni <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Vadim Pasternak <[email protected]> Date: Tue Jul 14 15:01:53 2020 +0300 lib/string_helpers: Introduce string_upper() and string_lower() helpers [ Upstream commit 58eeba0bdb52afe5c18ce2a760ca9fe2901943e9 ] Provide the helpers for string conversions to upper and lower cases. Signed-off-by: Vadim Pasternak <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Stable-dep-of: 3c0f4f09c063 ("usb: gadget: u_ether: Fix host MAC address case") Signed-off-by: Sasha Levin <[email protected]>
Author: Eli Cohen <[email protected]> Date: Wed Feb 8 07:51:02 2023 +0200 lib: cpu_rmap: Avoid use after free on rmap->obj array entries [ Upstream commit 4e0473f1060aa49621d40a113afde24818101d37 ] When calling irq_set_affinity_notifier() with NULL at the notify argument, it will cause freeing of the glue pointer in the corresponding array entry but will leave the pointer in the array. A subsequent call to free_irq_cpu_rmap() will try to free this entry again leading to possible use after free. Fix that by setting NULL to the array entry and checking that we have non-zero at the array entry when iterating over the array in free_irq_cpu_rmap(). The current code does not suffer from this since there are no cases where irq_set_affinity_notifier(irq, NULL) (note the NULL passed for the notify arg) is called, followed by a call to free_irq_cpu_rmap() so we don't hit and issue. Subsequent patches in this series excersize this flow, hence the required fix. Cc: Thomas Gleixner <[email protected]> Signed-off-by: Eli Cohen <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Greg Kroah-Hartman <[email protected]> Date: Tue May 30 12:42:15 2023 +0100 Linux 4.19.284 Link: https://lore.kernel.org/r/[email protected] Tested-by: Jon Hunter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-by: Guenter Roeck <[email protected]> Tested-by: Linux Kernel Functional Testing <[email protected]> Tested-by: Jon Hunter <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Finn Thain <[email protected]> Date: Sat May 6 19:38:12 2023 +1000 m68k: Move signal frame following exception on 68020/030 commit b845b574f86dcb6a70dfa698aa87a237b0878d2a upstream. On 68030/020, an instruction such as, moveml %a2-%a3/%a5,%sp@- may cause a stack page fault during instruction execution (i.e. not at an instruction boundary) and produce a format 0xB exception frame. In this situation, the value of USP will be unreliable. If a signal is to be delivered following the exception, this USP value is used to calculate the location for a signal frame. This can result in a corrupted user stack. The corruption was detected in dash (actually in glibc) where it showed up as an intermittent "stack smashing detected" message and crash following signal delivery for SIGCHLD. It was hard to reproduce that failure because delivery of the signal raced with the page fault and because the kernel places an unpredictable gap of up to 7 bytes between the USP and the signal frame. A format 0xB exception frame can be produced by a bus error or an address error. The 68030 Users Manual says that address errors occur immediately upon detection during instruction prefetch. The instruction pipeline allows prefetch to overlap with other instructions, which means an address error can arise during the execution of a different instruction. So it seems likely that this patch may help in the address error case also. Reported-and-tested-by: Stan Johnson <[email protected]> Link: https://lore.kernel.org/all/CAMuHMdW3yD22_ApemzW_6me3adq6A458u1_F0v-1EYwK_62jPA@mail.gmail.com/ Cc: Michael Schmitz <[email protected]> Cc: Andreas Schwab <[email protected]> Cc: [email protected] Co-developed-by: Michael Schmitz <[email protected]> Signed-off-by: Michael Schmitz <[email protected]> Signed-off-by: Finn Thain <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/9e66262a754fcba50208aa424188896cc52a1dd1.1683365892.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: RodrÃguez Barbarin, José Javier <[email protected]> Date: Tue Apr 11 10:33:28 2023 +0200 mcb-pci: Reallocate memory region to avoid memory overlapping [ Upstream commit 9be24faadd085c284890c3afcec7a0184642315a ] mcb-pci requests a fixed-size memory region to parse the chameleon table, however, if the chameleon table is smaller that the allocated region, it could overlap with the IP Cores' memory regions. After parsing the chameleon table, drop/reallocate the memory region with the actual chameleon table size. Co-developed-by: Jorge Sanjuan Garcia <[email protected]> Signed-off-by: Jorge Sanjuan Garcia <[email protected]> Signed-off-by: Javier Rodriguez <[email protected]> Signed-off-by: Johannes Thumshirn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Duoming Zhou <[email protected]> Date: Wed Mar 8 12:55:14 2023 +0000 media: netup_unidvb: fix use-after-free at del_timer() [ Upstream commit 0f5bb36bf9b39a2a96e730bf4455095b50713f63 ] When Universal DVB card is detaching, netup_unidvb_dma_fini() uses del_timer() to stop dma->timeout timer. But when timer handler netup_unidvb_dma_timeout() is running, del_timer() could not stop it. As a result, the use-after-free bug could happen. The process is shown below: (cleanup routine) | (timer routine) | mod_timer(&dev->tx_sim_timer, ..) netup_unidvb_finidev() | (wait a time) netup_unidvb_dma_fini() | netup_unidvb_dma_timeout() del_timer(&dma->timeout); | | ndev->pci_dev->dev //USE Fix by changing del_timer() to del_timer_sync(). Link: https://lore.kernel.org/linux-media/[email protected] Fixes: 52b1eaf4c59a ("[media] netup_unidvb: NetUP Universal DVB-S/S2/T/T2/C PCI-E card driver") Signed-off-by: Duoming Zhou <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Alan Stern <[email protected]> Date: Mon Apr 10 15:40:05 2023 -0400 media: radio-shark: Add endpoint checks commit 76e31045ba030e94e72105c01b2e98f543d175ac upstream. The syzbot fuzzer was able to provoke a WARNING from the radio-shark2 driver: ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 0 PID: 3271 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed2/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU: 0 PID: 3271 Comm: kworker/0:3 Not tainted 6.1.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xed2/0x1880 drivers/usb/core/urb.c:504 Code: 7c 24 18 e8 00 36 ea fb 48 8b 7c 24 18 e8 36 1c 02 ff 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 a0 b6 90 8a e8 9a 29 b8 03 <0f> 0b e9 58 f8 ff ff e8 d2 35 ea fb 48 81 c5 c0 05 00 00 e9 84 f7 RSP: 0018:ffffc90003876dd0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000 RDX: ffff8880750b0040 RSI: ffffffff816152b8 RDI: fffff5200070edac RBP: ffff8880172d81e0 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000080000000 R11: 0000000000000000 R12: 0000000000000001 R13: ffff8880285c5040 R14: 0000000000000002 R15: ffff888017158200 FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe03235b90 CR3: 000000000bc8e000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58 usb_bulk_msg+0x226/0x550 drivers/usb/core/message.c:387 shark_write_reg+0x1ff/0x2e0 drivers/media/radio/radio-shark2.c:88 ... The problem was caused by the fact that the driver does not check whether the endpoints it uses are actually present and have the appropriate types. This can be fixed by adding a simple check of these endpoints (and similarly for the radio-shark driver). Link: https://syzkaller.appspot.com/bug?extid=4b3f8190f6e13b3efd74 Reported-and-tested-by: [email protected] Signed-off-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Zheng Wang <[email protected]> Date: Wed Mar 8 00:43:38 2023 +0800 memstick: r592: Fix UAF bug in r592_remove due to race condition [ Upstream commit 63264422785021704c39b38f65a78ab9e4a186d7 ] In r592_probe, dev->detect_timer was bound with r592_detect_timer. In r592_irq function, the timer function will be invoked by mod_timer. If we remove the module which will call hantro_release to make cleanup, there may be a unfinished work. The possible sequence is as follows, which will cause a typical UAF bug. Fix it by canceling the work before cleanup in r592_remove. CPU0 CPU1 |r592_detect_timer r592_remove | memstick_free_host| put_device; | kfree(host); | | | queue_work | &host->media_checker //use Signed-off-by: Zheng Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Qiang Ning <[email protected]> Date: Thu Mar 30 10:43:53 2023 +0800 mfd: dln2: Fix memory leak in dln2_probe() [ Upstream commit 96da8f148396329ba769246cb8ceaa35f1ddfc48 ] When dln2_setup_rx_urbs() in dln2_probe() fails, error out_free forgets to call usb_put_dev() to decrease the refcount of dln2->usb_dev. Fix this by adding usb_put_dev() in the error handling code of dln2_probe(). Signed-off-by: Qiang Ning <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Tue May 9 16:35:53 2023 +0000 net: annotate sk->sk_err write from do_recvmmsg() [ Upstream commit e05a5f510f26607616fecdd4ac136310c8bea56b ] do_recvmmsg() can write to sk->sk_err from multiple threads. As said before, many other points reading or writing sk_err need annotations. Fixes: 34b88a68f26a ("net: Fix use after free in the recvmmsg exit path") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Florian Fainelli <[email protected]> Date: Thu May 4 16:07:27 2023 -0700 net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop() [ Upstream commit 93e0401e0fc0c54b0ac05b687cd135c2ac38187c ] The call to phy_stop() races with the later call to phy_disconnect(), resulting in concurrent phy_suspend() calls being run from different CPUs. The final call to phy_disconnect() ensures that the PHY is stopped and suspended, too. Fixes: c96e731c93ff ("net: bcmgenet: connect and disconnect from the PHY state machine") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Florian Fainelli <[email protected]> Date: Sun May 14 19:56:07 2023 -0700 net: bcmgenet: Restore phy_stop() depending upon suspend/close [ Upstream commit 225c657945c4a6307741cb3cc89467eadcc26e9b ] Removing the phy_stop() from bcmgenet_netif_stop() ended up causing warnings from the PHY library that phy_start() is called from the RUNNING state since we are no longer stopping the PHY state machine during bcmgenet_suspend(). Restore the call to phy_stop() but make it conditional on being called from the close or suspend path. Fixes: c96e731c93ff ("net: bcmgenet: connect and disconnect from the PHY state machine") Fixes: 93e0401e0fc0 ("net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()") Signed-off-by: Florian Fainelli <[email protected]> Reviewed-by: Pavan Chebbi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Nick Child <[email protected]> Date: Tue Mar 21 10:07:24 2023 -0500 net: Catch invalid index in XPS mapping [ Upstream commit 5dd0dfd55baec0742ba8f5625a0dd064aca7db16 ] When setting the XPS value of a TX queue, warn the user once if the index of the queue is greater than the number of allocated TX queues. Previously, this scenario went uncaught. In the best case, it resulted in unnecessary allocations. In the worst case, it resulted in out-of-bounds memory references through calls to `netdev_get_tx_queue( dev, index)`. Therefore, it is important to inform the user but not worth returning an error and risk downing the netdevice. Signed-off-by: Nick Child <[email protected]> Reviewed-by: Piotr Raczynski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Tue May 9 17:31:31 2023 +0000 net: datagram: fix data-races in datagram_poll() [ Upstream commit 5bca1d081f44c9443e61841842ce4e9179d327b6 ] datagram_poll() runs locklessly, we should add READ_ONCE() annotations while reading sk->sk_err, sk->sk_shutdown and sk->sk_state. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Uwe Kleine-König <[email protected]> Date: Wed May 10 22:00:20 2023 +0200 net: fec: Better handle pm_runtime_get() failing in .remove() [ Upstream commit f816b9829b19394d318e01953aa3b2721bca040d ] In the (unlikely) event that pm_runtime_get() (disguised as pm_runtime_resume_and_get()) fails, the remove callback returned an error early. The problem with this is that the driver core ignores the error value and continues removing the device. This results in a resource leak. Worse the devm allocated resources are freed and so if a callback of the driver is called later the register mapping is already gone which probably results in a crash. Fixes: a31eda65ba21 ("net: fec: fix clock count mis-match") Signed-off-by: Uwe Kleine-König <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Kuniyuki Iwashima <[email protected]> Date: Mon May 8 10:55:43 2023 -0700 net: Fix load-tearing on sk->sk_stamp in sock_recv_cmsgs(). [ Upstream commit dfd9248c071a3710c24365897459538551cb7167 ] KCSAN found a data race in sock_recv_cmsgs() where the read access to sk->sk_stamp needs READ_ONCE(). BUG: KCSAN: data-race in packet_recvmsg / packet_recvmsg write (marked) to 0xffff88803c81f258 of 8 bytes by task 19171 on cpu 0: sock_write_timestamp include/net/sock.h:2670 [inline] sock_recv_cmsgs include/net/sock.h:2722 [inline] packet_recvmsg+0xb97/0xd00 net/packet/af_packet.c:3489 sock_recvmsg_nosec net/socket.c:1019 [inline] sock_recvmsg+0x11a/0x130 net/socket.c:1040 sock_read_iter+0x176/0x220 net/socket.c:1118 call_read_iter include/linux/fs.h:1845 [inline] new_sync_read fs/read_write.c:389 [inline] vfs_read+0x5e0/0x630 fs/read_write.c:470 ksys_read+0x163/0x1a0 fs/read_write.c:613 __do_sys_read fs/read_write.c:623 [inline] __se_sys_read fs/read_write.c:621 [inline] __x64_sys_read+0x41/0x50 fs/read_write.c:621 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffff88803c81f258 of 8 bytes by task 19183 on cpu 1: sock_recv_cmsgs include/net/sock.h:2721 [inline] packet_recvmsg+0xb64/0xd00 net/packet/af_packet.c:3489 sock_recvmsg_nosec net/socket.c:1019 [inline] sock_recvmsg+0x11a/0x130 net/socket.c:1040 sock_read_iter+0x176/0x220 net/socket.c:1118 call_read_iter include/linux/fs.h:1845 [inline] new_sync_read fs/read_write.c:389 [inline] vfs_read+0x5e0/0x630 fs/read_write.c:470 ksys_read+0x163/0x1a0 fs/read_write.c:613 __do_sys_read fs/read_write.c:623 [inline] __se_sys_read fs/read_write.c:621 [inline] __x64_sys_read+0x41/0x50 fs/read_write.c:621 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0xffffffffc4653600 -> 0x0000000000000000 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 19183 Comm: syz-executor.5 Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 6c7c98bad488 ("sock: avoid dirtying sk_stamp, if possible") Reported-by: syzbot <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Pratyush Yadav <[email protected]> Date: Mon May 22 17:30:20 2023 +0200 net: fix skb leak in __skb_tstamp_tx() commit 8a02fb71d7192ff1a9a47c9d937624966c6e09af upstream. Commit 50749f2dd685 ("tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.") added a call to skb_orphan_frags_rx() to fix leaks with zerocopy skbs. But it ended up adding a leak of its own. When skb_orphan_frags_rx() fails, the function just returns, leaking the skb it just cloned. Free it before returning. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. Fixes: 50749f2dd685 ("tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.") Signed-off-by: Pratyush Yadav <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Dong Chenchen <[email protected]> Date: Thu May 11 20:54:40 2023 +0800 net: nsh: Use correct mac_offset to unwind gso skb in nsh_gso_segment() [ Upstream commit c83b49383b595be50647f0c764a48c78b5f3c4f8 ] As the call trace shows, skb_panic was caused by wrong skb->mac_header in nsh_gso_segment(): invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 3 PID: 2737 Comm: syz Not tainted 6.3.0-next-20230505 #1 RIP: 0010:skb_panic+0xda/0xe0 call Trace: skb_push+0x91/0xa0 nsh_gso_segment+0x4f3/0x570 skb_mac_gso_segment+0x19e/0x270 __skb_gso_segment+0x1e8/0x3c0 validate_xmit_skb+0x452/0x890 validate_xmit_skb_list+0x99/0xd0 sch_direct_xmit+0x294/0x7c0 __dev_queue_xmit+0x16f0/0x1d70 packet_xmit+0x185/0x210 packet_snd+0xc15/0x1170 packet_sendmsg+0x7b/0xa0 sock_sendmsg+0x14f/0x160 The root cause is: nsh_gso_segment() use skb->network_header - nhoff to reset mac_header in skb_gso_error_unwind() if inner-layer protocol gso fails. However, skb->network_header may be reset by inner-layer protocol gso function e.g. mpls_gso_segment. skb->mac_header reset by the inaccurate network_header will be larger than skb headroom. nsh_gso_segment nhoff = skb->network_header - skb->mac_header; __skb_pull(skb,nsh_len) skb_mac_gso_segment mpls_gso_segment skb_reset_network_header(skb);//skb->network_header+=nsh_len return -EINVAL; skb_gso_error_unwind skb_push(skb, nsh_len); skb->mac_header = skb->network_header - nhoff; // skb->mac_header > skb->headroom, cause skb_push panic Use correct mac_offset to restore mac_header and get rid of nhoff. Fixes: c411ed854584 ("nsh: add GSO support") Reported-by: [email protected] Suggested-by: Eric Dumazet <[email protected]> Signed-off-by: Dong Chenchen <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Nathan Chancellor <[email protected]> Date: Sun Mar 19 16:41:08 2023 -0700 net: pasemi: Fix return type of pasemi_mac_start_tx() [ Upstream commit c8384d4a51e7cb0e6587f3143f29099f202c5de1 ] With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A warning in clang aims to catch these at compile time, which reveals: drivers/net/ethernet/pasemi/pasemi_mac.c:1665:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = pasemi_mac_start_tx, ^~~~~~~~~~~~~~~~~~~ 1 error generated. ->ndo_start_xmit() in 'struct net_device_ops' expects a return type of 'netdev_tx_t', not 'int'. Adjust the return type of pasemi_mac_start_tx() to match the prototype's to resolve the warning. While PowerPC does not currently implement support for kCFI, it could in the future, which means this warning becomes a fatal CFI failure at run time. Link: https://github.com/ClangBuiltLinux/linux/issues/1750 Signed-off-by: Nathan Chancellor <[email protected]> Reviewed-by: Horatiu Vultur <[email protected]> Link: https://lore.kernel.org/r/20230319-pasemi-incompatible-pointer-types-strict-v1-1-1b9459d8aef0@kernel.org Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Pablo Neira Ayuso <[email protected]> Date: Tue May 16 17:06:09 2023 +0200 netfilter: nf_tables: add nft_setelem_parse_key() [ 20a1452c35425b2cef76f21f8395ef069dfddfa9 ] Add helper function to parse the set element key netlink attribute. v4: No changes v3: New patch [sbrivio: refactor error paths and labels; use NFT_DATA_VALUE_MAXLEN instead of sizeof(*key) in helper, value can be longer than that; rebase] Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Pablo Neira Ayuso <[email protected]> Date: Tue May 16 17:06:10 2023 +0200 netfilter: nf_tables: allow up to 64 bytes in the set element data area [ fdb9c405e35bdc6e305b9b4e20ebc141ed14fc81 ] So far, the set elements could store up to 128-bits in the data area. Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Pablo Neira Ayuso <[email protected]> Date: Tue May 16 17:06:13 2023 +0200 netfilter: nf_tables: do not allow RULE_ID to refer to another chain [ 36d5b2913219ac853908b0f1c664345e04313856 ] When doing lookups for rules on the same batch by using its ID, a rule from a different chain can be used. If a rule is added to a chain but tries to be positioned next to a rule from a different chain, it will be linked to chain2, but the use counter on chain1 would be the one to be incremented. When looking for rules by ID, use the chain that was used for the lookup by name. The chain used in the context copied to the transaction needs to match that same chain. That way, struct nft_rule does not need to get enlarged with another member. Fixes: 1a94e38d254b ("netfilter: nf_tables: add NFTA_RULE_ID attribute") Fixes: 75dd48e2e420 ("netfilter: nf_tables: Support RULE_ID reference in new rule") Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]> Cc: <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Pablo Neira Ayuso <[email protected]> Date: Tue May 16 17:06:11 2023 +0200 netfilter: nf_tables: stricter validation of element data [ 7e6bc1f6cabcd30aba0b11219d8e01b952eacbb6 ] Make sure element data type and length do not mismatch the one specified by the set declaration. Fixes: 7d7402642eaf ("netfilter: nf_tables: variable sized set element keys / data") Reported-by: Hugues ANGUELKOV <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Pablo Neira Ayuso <[email protected]> Date: Tue May 16 17:06:12 2023 +0200 netfilter: nf_tables: validate NFTA_SET_ELEM_OBJREF based on NFT_SET_OBJECT flag [ 5a2f3dc31811e93be15522d9eb13ed61460b76c8 ] If the NFTA_SET_ELEM_OBJREF netlink attribute is present and NFT_SET_OBJECT flag is set on, report EINVAL. Move existing sanity check earlier to validate that NFT_SET_OBJECT requires NFTA_SET_ELEM_OBJREF. Fixes: 8aeff920dcc9 ("netfilter: nf_tables: add stateful object reference to set elements") Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Pablo Neira Ayuso <[email protected]> Date: Tue May 16 17:06:08 2023 +0200 netfilter: nf_tables: validate registers coming from userspace. [ 6e1acfa387b9ff82cfc7db8cc3b6959221a95851 ] Bail out in case userspace uses unsupported registers. Fixes: 49499c3e6e18 ("netfilter: nf_tables: switch registers to 32 bit addressing") Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Pablo Neira Ayuso <[email protected]> Date: Tue May 16 17:06:05 2023 +0200 netfilter: nftables: add nft_parse_register_load() and use it [ 4f16d25c68ec844299a4df6ecbb0234eaf88a935 ] This new function combines the netlink register attribute parser and the load validation function. This update requires to replace: enum nft_registers sreg:8; in many of the expression private areas otherwise compiler complains with: error: cannot take address of bit-field ‘sreg’ when passing the register field as reference. Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Pablo Neira Ayuso <[email protected]> Date: Tue May 16 17:06:06 2023 +0200 netfilter: nftables: add nft_parse_register_store() and use it [ 345023b0db315648ccc3c1a36aee88304a8b4d91 ] This new function combines the netlink register attribute parser and the store validation function. This update requires to replace: enum nft_registers dreg:8; in many of the expression private areas otherwise compiler complains with: error: cannot take address of bit-field ‘dreg’ when passing the register field as reference. Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Pablo Neira Ayuso <[email protected]> Date: Tue May 16 17:06:07 2023 +0200 netfilter: nftables: statify nft_parse_register() [ 08a01c11a5bb3de9b0a9c9b2685867e50eda9910 ] This function is not used anymore by any extension, statify it. Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Tue May 9 16:56:34 2023 +0000 netlink: annotate accesses to nlk->cb_running [ Upstream commit a939d14919b799e6fff8a9c80296ca229ba2f8a4 ] Both netlink_recvmsg() and netlink_native_seq_show() read nlk->cb_running locklessly. Use READ_ONCE() there. Add corresponding WRITE_ONCE() to netlink_dump() and __netlink_dump_start() syzbot reported: BUG: KCSAN: data-race in __netlink_dump_start / netlink_recvmsg write to 0xffff88813ea4db59 of 1 bytes by task 28219 on cpu 0: __netlink_dump_start+0x3af/0x4d0 net/netlink/af_netlink.c:2399 netlink_dump_start include/linux/netlink.h:308 [inline] rtnetlink_rcv_msg+0x70f/0x8c0 net/core/rtnetlink.c:6130 netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2577 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6192 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] sock_write_iter+0x1aa/0x230 net/socket.c:1138 call_write_iter include/linux/fs.h:1851 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x463/0x760 fs/read_write.c:584 ksys_write+0xeb/0x1a0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x42/0x50 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff88813ea4db59 of 1 bytes by task 28222 on cpu 1: netlink_recvmsg+0x3b4/0x730 net/netlink/af_netlink.c:2022 sock_recvmsg_nosec+0x4c/0x80 net/socket.c:1017 ____sys_recvmsg+0x2db/0x310 net/socket.c:2718 ___sys_recvmsg net/socket.c:2762 [inline] do_recvmmsg+0x2e5/0x710 net/socket.c:2856 __sys_recvmmsg net/socket.c:2935 [inline] __do_sys_recvmmsg net/socket.c:2958 [inline] __se_sys_recvmmsg net/socket.c:2951 [inline] __x64_sys_recvmmsg+0xe2/0x160 net/socket.c:2951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00 -> 0x01 Fixes: 16b304f3404f ("netlink: Eliminate kmalloc in netlink dump operation.") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ryusuke Konishi <[email protected]> Date: Wed May 10 00:29:56 2023 +0900 nilfs2: fix use-after-free bug of nilfs_root in nilfs_evict_inode() commit 9b5a04ac3ad9898c4745cba46ea26de74ba56a8e upstream. During unmount process of nilfs2, nothing holds nilfs_root structure after nilfs2 detaches its writer in nilfs_detach_log_writer(). However, since nilfs_evict_inode() uses nilfs_root for some cleanup operations, it may cause use-after-free read if inodes are left in "garbage_list" and released by nilfs_dispose_list() at the end of nilfs_detach_log_writer(). Fix this issue by modifying nilfs_evict_inode() to only clear inode without additional metadata changes that use nilfs_root if the file system is degraded to read-only or the writer is detached. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ryusuke Konishi <[email protected]> Reported-by: [email protected] Closes: https://lkml.kernel.org/r/[email protected] Tested-by: Ryusuke Konishi <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Helge Deller <[email protected]> Date: Mon May 22 22:57:30 2023 +0200 parisc: Allow to reboot machine after system halt commit 2028315cf59bb899a5ac7e87dc48ecb8fac7ac24 upstream. In case a machine can't power-off itself on system shutdown, allow the user to reboot it by pressing the RETURN key. Cc: <[email protected]> # v4.14+ Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Helge Deller <[email protected]> Date: Wed May 24 17:07:07 2023 +0200 parisc: Fix flush_dcache_page() for usage from irq context commit 61e150fb310729c98227a5edf6e4a3619edc3702 upstream. Since at least kernel 6.1, flush_dcache_page() is called with IRQs disabled, e.g. from aio_complete(). But the current implementation for flush_dcache_page() on parisc unintentionally re-enables IRQs, which may lead to deadlocks. Fix it by using xa_lock_irqsave() and xa_unlock_irqrestore() for the flush_dcache_mmap_*lock() macros instead. Cc: [email protected] Cc: [email protected] # 5.18+ Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Alain Volmat <[email protected]> Date: Fri Feb 10 23:43:08 2023 +0100 phy: st: miphy28lp: use _poll_timeout functions for waits [ Upstream commit e3be4dd2c8d8aabfd2c3127d0e2e5754d3ae82d6 ] This commit introduces _poll_timeout functions usage instead of wait loops waiting for a status bit. Signed-off-by: Alain Volmat <[email protected]> Reviewed-by: Patrice Chotard <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hans de Goede <[email protected]> Date: Sat Apr 15 20:23:32 2023 +0200 power: supply: bq27xxx: Fix bq27xxx_battery_update() race condition commit 5c34c0aef185dcd10881847b9ebf20046aa77cb4 upstream. bq27xxx_battery_update() assumes / requires that it is only run once, not multiple times at the same time. But there are 3 possible callers: 1. bq27xxx_battery_poll() delayed_work item handler 2. bq27xxx_battery_irq_handler_thread() I2C IRQ handler 3. bq27xxx_battery_setup() And there is no protection against these racing with each other, fix this race condition by making all callers take di->lock: - Rename bq27xxx_battery_update() to bq27xxx_battery_update_unlocked() - Add new bq27xxx_battery_update() which takes di->lock and then calls bq27xxx_battery_update_unlocked() - Make stale cache check code in bq27xxx_battery_get_property(), which already takes di->lock directly to check the jiffies, call bq27xxx_battery_update_unlocked() instead of messing with the delayed_work item - Make bq27xxx_battery_update_unlocked() mod the delayed-work item so that the next poll is delayed to poll_interval milliseconds after the last update independent of the source of the update Fixes: 740b755a3b34 ("bq27x00: Poll battery state") Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Hans de Goede <[email protected]> Date: Sat Apr 15 20:23:33 2023 +0200 power: supply: bq27xxx: Fix I2C IRQ race on remove commit 444ff00734f3878cd54ddd1ed5e2e6dbea9326d5 upstream. devm_request_threaded_irq() requested IRQs are only free-ed after the driver's remove function has ran. So the IRQ could trigger and call bq27xxx_battery_update() after bq27xxx_battery_teardown() has already run. Switch to explicitly free-ing the IRQ in bq27xxx_battery_i2c_remove() to fix this. Fixes: 8807feb91b76 ("power: bq27xxx_battery: Add interrupt handling support") Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Hans de Goede <[email protected]> Date: Sat Apr 15 20:23:34 2023 +0200 power: supply: bq27xxx: Fix poll_interval handling and races on remove commit c00bc80462afc7963f449d7f21d896d2f629cacc upstream. Before this patch bq27xxx_battery_teardown() was setting poll_interval = 0 to avoid bq27xxx_battery_update() requeuing the delayed_work item. There are 2 problems with this: 1. If the driver is unbound through sysfs, rather then the module being rmmod-ed, this changes poll_interval unexpectedly 2. This is racy, after it being set poll_interval could be changed before bq27xxx_battery_update() checks it through /sys/module/bq27xxx_battery/parameters/poll_interval Fix this by added a removed attribute to struct bq27xxx_device_info and using that instead of setting poll_interval to 0. There also is another poll_interval related race on remove(), writing /sys/module/bq27xxx_battery/parameters/poll_interval will requeue the delayed_work item for all devices on the bq27xxx_battery_devices list and the device being removed was only removed from that list after cancelling the delayed_work item. Fix this by moving the removal from the bq27xxx_battery_devices list to before cancelling the delayed_work item. Fixes: 8cfaaa811894 ("bq27x00_battery: Fix OOPS caused by unregistring bq27x00 driver") Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Hans de Goede <[email protected]> Date: Thu Apr 13 12:09:41 2023 +0200 power: supply: leds: Fix blink to LED on transition commit e4484643991e0f6b89060092563f0dbab9450cbb upstream. When a battery's status changes from charging to full then the charging-blink-full-solid trigger tries to change the LED from blinking to solid/on. As is documented in include/linux/leds.h to deactivate blinking / to make the LED solid a LED_OFF must be send: """ * Deactivate blinking again when the brightness is set to LED_OFF * via the brightness_set() callback. """ led_set_brighness() calls with a brightness value other then 0 / LED_OFF merely change the brightness of the LED in its on state while it is blinking. So power_supply_update_bat_leds() must first send a LED_OFF event before the LED_FULL to disable blinking. Fixes: 6501f728c56f ("power_supply: Add new LED trigger charging-blink-solid-full") Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Vasily Khoruzhick <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Daisuke Nojiri <[email protected]> Date: Mon Apr 24 11:25:58 2023 -0700 power: supply: sbs-charger: Fix INHIBITED bit for Status reg commit b2f2a3c9800208b0db2c2e34b05323757117faa2 upstream. CHARGE_INHIBITED bit position of the ChargerStatus register is actually 0 not 1. This patch corrects it. Fixes: feb583e37f8a8 ("power: supply: add sbs-charger driver") Signed-off-by: Daisuke Nojiri <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Hao Zeng <[email protected]> Date: Wed Apr 26 09:05:27 2023 +0800 recordmcount: Fix memory leaks in the uwrite function [ Upstream commit fa359d068574d29e7d2f0fdd0ebe4c6a12b5cfb9 ] Common realloc mistake: 'file_append' nulled but not freed upon failure Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Hao Zeng <[email protected]> Suggested-by: Steven Rostedt <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Alexander Stein <[email protected]> Date: Mon Mar 13 08:18:11 2023 +0100 regmap: cache: Return error in cache sync operations for REGCACHE_NONE [ Upstream commit fd883d79e4dcd2417c2b80756f22a2ff03b0f6e0 ] There is no sense in doing a cache sync on REGCACHE_NONE regmaps. Instead of panicking the kernel due to missing cache_ops, return an error to client driver. Signed-off-by: Alexander Stein <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Heiko Carstens <[email protected]> Date: Thu May 11 17:04:41 2023 +0200 s390/qdio: fix do_sqbs() inline assembly constraint [ Upstream commit 2862a2fdfae875888e3c1c3634e3422e01d98147 ] Use "a" constraint instead of "d" constraint to pass the state parameter to the do_sqbs() inline assembly. This prevents that general purpose register zero is used for the state parameter. If the compiler would select general purpose register zero this would be problematic for the used instruction in rsy format: the register used for the state parameter is a base register. If the base register is general purpose register zero the contents of the register are unexpectedly ignored when the instruction is executed. This only applies to z/VM guests using QIOASSIST with dedicated (pass through) QDIO-based devices such as FCP [zfcp driver] as well as real OSA or HiperSockets [qeth driver]. A possible symptom for this case using zfcp is the following repeating kernel message pattern: zfcp <devbusid>: A QDIO problem occurred zfcp <devbusid>: A QDIO problem occurred zfcp <devbusid>: qdio: ZFCP on SC <sc> using AI:1 QEBSM:1 PRI:1 TDD:1 SIGA: W zfcp <devbusid>: A QDIO problem occurred zfcp <devbusid>: A QDIO problem occurred Each of the qdio problem message can be accompanied by the following entries for the affected subchannel <sc> in /sys/kernel/debug/s390dbf/qdio_error/hex_ascii for zfcp or qeth: <sc> ccq: 69.... <sc> SQBS ERROR. Reviewed-by: Benjamin Block <[email protected]> Cc: Steffen Maier <[email protected]> Fixes: 8129ee164267 ("[PATCH] s390: qdio V=V pass-through") Cc: <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Alexander Gordeev <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Heiko Carstens <[email protected]> Date: Tue Jun 22 15:26:16 2021 +0200 s390/qdio: get rid of register asm [ Upstream commit d3e2ff5436d6ee38b572ba5c01dc7994769bec54 ] Reviewed-by: Benjamin Block <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]> Stable-dep-of: 2862a2fdfae8 ("s390/qdio: fix do_sqbs() inline assembly constraint") Signed-off-by: Sasha Levin <[email protected]>
Author: Josh Poimboeuf <[email protected]> Date: Wed Apr 12 10:24:07 2023 -0700 sched: Fix KCSAN noinstr violation [ Upstream commit e0b081d17a9f4e5c0cbb0e5fbeb1abe3de0f7e4e ] With KCSAN enabled, end_of_stack() can get out-of-lined. Force it inline. Fixes the following warnings: vmlinux.o: warning: objtool: check_stackleak_irqoff+0x2b: call to end_of_stack() leaves .noinstr.text section Signed-off-by: Josh Poimboeuf <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lore.kernel.org/r/cc1b4d73d3a428a00d206242a68fdf99a934ca7b.1681320026.git.jpoimboe@kernel.org Signed-off-by: Sasha Levin <[email protected]>
Author: Zheng Wang <[email protected]> Date: Sat Mar 18 16:16:35 2023 +0800 scsi: message: mptlan: Fix use after free bug in mptlan_remove() due to race condition [ Upstream commit f486893288f3e9b171b836f43853a6426515d800 ] mptlan_probe() calls mpt_register_lan_device() which initializes the &priv->post_buckets_task workqueue. A call to mpt_lan_wake_post_buckets_task() will subsequently start the work. During driver unload in mptlan_remove() the following race may occur: CPU0 CPU1 |mpt_lan_post_receive_buckets_work() mptlan_remove() | free_netdev() | kfree(dev); | | | dev->mtu | //use Fix this by finishing the work prior to cleaning up in mptlan_remove(). [mkp: we really should remove mptlan instead of attempting to fix it] Signed-off-by: Zheng Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hardik Garg <[email protected]> Date: Fri May 26 16:21:36 2023 -0700 selftests/memfd: Fix unknown type name build failure Partially backport v6.3 commit 11f75a01448f ("selftests/memfd: add tests for MFD_NOEXEC_SEAL MFD_EXEC") to fix an unknown type name build error. In some systems, the __u64 typedef is not present due to differences in system headers, causing compilation errors like this one: fuse_test.c:64:8: error: unknown type name '__u64' 64 | static __u64 mfd_assert_get_seals(int fd) This header includes the __u64 typedef which increases the likelihood of successful compilation on a wider variety of systems. Signed-off-by: Hardik Garg <[email protected]> Reviewed-by: Tyler Hicks (Microsoft) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Tony Lindgren <[email protected]> Date: Tue Apr 18 13:14:06 2023 +0300 serial: 8250: Reinit port->pm on port specific driver unbind [ Upstream commit 04e82793f068d2f0ffe62fcea03d007a8cdc16a7 ] When we unbind a serial port hardware specific 8250 driver, the generic serial8250 driver takes over the port. After that we see an oops about 10 seconds later. This can produce the following at least on some TI SoCs: Unhandled fault: imprecise external abort (0x1406) Internal error: : 1406 [#1] SMP ARM Turns out that we may still have the serial port hardware specific driver port->pm in use, and serial8250_pm() tries to call it after the port specific driver is gone: serial8250_pm [8250_base] from uart_change_pm+0x54/0x8c [serial_base] uart_change_pm [serial_base] from uart_hangup+0x154/0x198 [serial_base] uart_hangup [serial_base] from __tty_hangup.part.0+0x328/0x37c __tty_hangup.part.0 from disassociate_ctty+0x154/0x20c disassociate_ctty from do_exit+0x744/0xaac do_exit from do_group_exit+0x40/0x8c do_group_exit from __wake_up_parent+0x0/0x1c Let's fix the issue by calling serial8250_set_defaults() in serial8250_unregister_port(). This will set the port back to using the serial8250 default functions, and sets the port->pm to point to serial8250_pm. Signed-off-by: Tony Lindgren <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Vitaliy Tomin <[email protected]> Date: Sun Apr 23 11:45:12 2023 +0800 serial: Add support for Advantech PCI-1611U card commit d2b00516de0e1d696724247098f6733a6ea53908 upstream. Add support for Advantech PCI-1611U card Advantech provides opensource drivers for this and many others card based on legacy copy of 8250_pci driver called adv950 https://www.advantech.com/emt/support/details/driver?id=1-TDOIMJ It is hard to maintain to run as out of tree module on newer kernels. Just adding PCI ID to kernel 8250_pci works perfect. Signed-off-by: Vitaliy Tomin <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Ke Zhang <[email protected]> Date: Fri Apr 28 11:16:36 2023 +0800 serial: arc_uart: fix of_iomap leak in `arc_serial_probe` [ Upstream commit 8ab5fc55d7f65d58a3c3aeadf11bdf60267cd2bd ] Smatch reports: drivers/tty/serial/arc_uart.c:631 arc_serial_probe() warn: 'port->membase' from of_iomap() not released on lines: 631. In arc_serial_probe(), if uart_add_one_port() fails, port->membase is not released, which would cause a resource leak. To fix this, I replace of_iomap with devm_platform_ioremap_resource. Fixes: 8dbe1d5e09a7 ("serial/arc: inline the probe helper") Signed-off-by: Ke Zhang <[email protected]> Reviewed-by: Dongliang Mu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Christophe Leroy <[email protected]> Date: Mon May 15 16:07:15 2023 +0200 spi: fsl-cpm: Use 16 bit mode for large transfers with even size (cherry picked from upstream fc96ec826bced75cc6b9c07a4ac44bbf651337ab) On CPM, the RISC core is a lot more efficiant when doing transfers in 16-bits chunks than in 8-bits chunks, but unfortunately the words need to be byte swapped as seen in a previous commit. So, for large tranfers with an even size, allocate a temporary tx buffer and byte-swap data before and after transfer. This change allows setting higher speed for transfer. For instance on an MPC 8xx (CPM1 comms RISC processor), the documentation tells that transfer in byte mode at 1 kbit/s uses 0.200% of CPM load at 25 MHz while a word transfer at the same speed uses 0.032% of CPM load. This means the speed can be 6 times higher in word mode for the same CPM load. For the time being, only do it on CPM1 as there must be a trade-off between the CPM load reduction and the CPU load required to byte swap the data. Signed-off-by: Christophe Leroy <[email protected]> Link: https://lore.kernel.org/r/f2e981f20f92dd28983c3949702a09248c23845c.1680371809.git.christophe.leroy@csgroup.eu Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Christophe Leroy <[email protected]> Date: Mon May 15 16:07:14 2023 +0200 spi: fsl-spi: Re-organise transfer bits_per_word adaptation (backported from upstream 8a5299a1278eadf1e08a598a5345c376206f171e) For different reasons, fsl-spi driver performs bits_per_word modifications for different reasons: - On CPU mode, to minimise amount of interrupts - On CPM/QE mode to work around controller byte order For CPU mode that's done in fsl_spi_prepare_message() while for CPM mode that's done in fsl_spi_setup_transfer(). Reunify all of it in fsl_spi_prepare_message(), and catch impossible cases early through master's bits_per_word_mask instead of returning EINVAL later. Signed-off-by: Christophe Leroy <[email protected]> Link: https://lore.kernel.org/r/0ce96fe96e8b07cba0613e4097cfd94d09b8919a.1680371809.git.christophe.leroy@csgroup.eu Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Rasmus Villemoes <[email protected]> Date: Mon May 15 16:07:13 2023 +0200 spi: spi-fsl-spi: automatically adapt bits-per-word in cpu mode (cherry picked from upstream af0e6242909c3c4297392ca3e94eff1b4db71a97) Taking one interrupt for every byte is rather slow. Since the controller is perfectly capable of transmitting 32 bits at a time, change t->bits_per-word to 32 when the length is divisible by 4 and large enough that the reduced number of interrupts easily compensates for the one or two extra fsl_spi_setup_transfer() calls this causes. Signed-off-by: Rasmus Villemoes <[email protected]> Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Kevin Groeneveld <[email protected]> Date: Sat Mar 18 18:21:32 2023 -0400 spi: spi-imx: fix MX51_ECSPI_* macros when cs > 3 [ Upstream commit 87c614175bbf28d3fd076dc2d166bac759e41427 ] When using gpio based chip select the cs value can go outside the range 0 – 3. The various MX51_ECSPI_* macros did not take this into consideration resulting in possible corruption of the configuration. For example for any cs value over 3 the SCLKPHA bits would not be set and other values in the register possibly corrupted. One way to fix this is to just mask the cs bits to 2 bits. This still allows all 4 native chip selects to work as well as gpio chip selects (which can use any of the 4 chip select configurations). Signed-off-by: Kevin Groeneveld <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Philipp Hortmann <[email protected]> Date: Thu Feb 23 07:47:21 2023 +0100 staging: rtl8192e: Replace macro RTL_PCI_DEVICE with PCI_DEVICE [ Upstream commit fda2093860df4812d69052a8cf4997e53853a340 ] Replace macro RTL_PCI_DEVICE with PCI_DEVICE to get rid of rtl819xp_ops which is empty. Signed-off-by: Philipp Hortmann <[email protected]> Link: https://lore.kernel.org/r/8b45ee783fa91196b7c9d6fc840a189496afd2f4.1677133271.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Ilya Leoshkevich <[email protected]> Date: Thu May 4 16:40:20 2023 +0200 statfs: enforce statfs[64] structure initialization commit ed40866ec7d328b3dfb70db7e2011640a16202c3 upstream. s390's struct statfs and struct statfs64 contain padding, which field-by-field copying does not set. Initialize the respective structs with zeros before filling them and copying them to userspace, like it's already done for the compat versions of these structs. Found by KMSAN. [[email protected]: fixed typo in patch description] Acked-by: Heiko Carstens <[email protected]> Cc: [email protected] # v4.14+ Signed-off-by: Ilya Leoshkevich <[email protected]> Reviewed-by: Andrew Morton <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexander Gordeev <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Tue May 9 20:36:56 2023 +0000 tcp: add annotations around sk->sk_shutdown accesses [ Upstream commit e14cadfd80d76f01bfaa1a8d745b1db19b57d6be ] Now sk->sk_shutdown is no longer a bitfield, we can add standard READ_ONCE()/WRITE_ONCE() annotations to silence KCSAN reports like the following: BUG: KCSAN: data-race in tcp_disconnect / tcp_poll write to 0xffff88814588582c of 1 bytes by task 3404 on cpu 1: tcp_disconnect+0x4d6/0xdb0 net/ipv4/tcp.c:3121 __inet_stream_connect+0x5dd/0x6e0 net/ipv4/af_inet.c:715 inet_stream_connect+0x48/0x70 net/ipv4/af_inet.c:727 __sys_connect_file net/socket.c:2001 [inline] __sys_connect+0x19b/0x1b0 net/socket.c:2018 __do_sys_connect net/socket.c:2028 [inline] __se_sys_connect net/socket.c:2025 [inline] __x64_sys_connect+0x41/0x50 net/socket.c:2025 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff88814588582c of 1 bytes by task 3374 on cpu 0: tcp_poll+0x2e6/0x7d0 net/ipv4/tcp.c:562 sock_poll+0x253/0x270 net/socket.c:1383 vfs_poll include/linux/poll.h:88 [inline] io_poll_check_events io_uring/poll.c:281 [inline] io_poll_task_func+0x15a/0x820 io_uring/poll.c:333 handle_tw_list io_uring/io_uring.c:1184 [inline] tctx_task_work+0x1fe/0x4d0 io_uring/io_uring.c:1246 task_work_run+0x123/0x160 kernel/task_work.c:179 get_signal+0xe64/0xff0 kernel/signal.c:2635 arch_do_signal_or_restart+0x89/0x2a0 arch/x86/kernel/signal.c:306 exit_to_user_mode_loop+0x6f/0xe0 kernel/entry/common.c:168 exit_to_user_mode_prepare+0x6c/0xb0 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline] syscall_exit_to_user_mode+0x26/0x140 kernel/entry/common.c:297 do_syscall_64+0x4d/0xc0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x03 -> 0x00 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Paolo Abeni <[email protected]> Date: Mon Nov 16 10:48:04 2020 +0100 tcp: factor out __tcp_close() helper [ Upstream commit 77c3c95637526f1e4330cc9a4b2065f668c2c4fe ] unlocked version of protocol level close, will be used by MPTCP to allow decouple orphaning and subflow level close. Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Stable-dep-of: e14cadfd80d7 ("tcp: add annotations around sk->sk_shutdown accesses") Signed-off-by: Sasha Levin <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Tue Dec 4 07:58:17 2018 -0800 tcp: reduce POLLOUT events caused by TCP_NOTSENT_LOWAT [ Upstream commit a74f0fa082b76c6a76cba5672f36218518bfdc09 ] TCP_NOTSENT_LOWAT socket option or sysctl was added in linux-3.12 as a step to enable bigger tcp sndbuf limits. It works reasonably well, but the following happens : Once the limit is reached, TCP stack generates an [E]POLLOUT event for every incoming ACK packet. This causes a high number of context switches. This patch implements the strategy David Miller added in sock_def_write_space() : - If TCP socket has a notsent_lowat constraint of X bytes, allow sendmsg() to fill up to X bytes, but send [E]POLLOUT only if number of notsent bytes is below X/2 This considerably reduces TCP_NOTSENT_LOWAT overhead, while allowing to keep the pipe full. Tested: 100 ms RTT netem testbed between A and B, 100 concurrent TCP_STREAM A:/# cat /proc/sys/net/ipv4/tcp_wmem 4096 262144 64000000 A:/# super_netperf 100 -H B -l 1000 -- -K bbr & A:/# grep TCP /proc/net/sockstat TCP: inuse 203 orphan 0 tw 19 alloc 414 mem 1364904 # This is about 54 MB of memory per flow :/ A:/# vmstat 5 5 procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 0 256220672 13532 694976 0 0 10 0 28 14 0 1 99 0 0 2 0 0 256320016 13532 698480 0 0 512 0 715901 5927 0 10 90 0 0 0 0 0 256197232 13532 700992 0 0 735 13 771161 5849 0 11 89 0 0 1 0 0 256233824 13532 703320 0 0 512 23 719650 6635 0 11 89 0 0 2 0 0 256226880 13532 705780 0 0 642 4 775650 6009 0 12 88 0 0 A:/# echo 2097152 >/proc/sys/net/ipv4/tcp_notsent_lowat A:/# grep TCP /proc/net/sockstat TCP: inuse 203 orphan 0 tw 19 alloc 414 mem 86411 # 3.5 MB per flow A:/# vmstat 5 5 # check that context switches have not inflated too much. procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 2 0 0 260386512 13592 662148 0 0 10 0 17 14 0 1 99 0 0 0 0 0 260519680 13592 604184 0 0 512 13 726843 12424 0 10 90 0 0 1 1 0 260435424 13592 598360 0 0 512 25 764645 12925 0 10 90 0 0 1 0 0 260855392 13592 578380 0 0 512 7 722943 13624 0 11 88 0 0 1 0 0 260445008 13592 601176 0 0 614 34 772288 14317 0 10 90 0 0 Signed-off-by: Eric Dumazet <[email protected]> Acked-by: Soheil Hassas Yeganeh <[email protected]> Signed-off-by: David S. Miller <[email protected]> Stable-dep-of: e14cadfd80d7 ("tcp: add annotations around sk->sk_shutdown accesses") Signed-off-by: Sasha Levin <[email protected]>
Author: Soheil Hassas Yeganeh <[email protected]> Date: Mon Sep 14 17:52:09 2020 -0400 tcp: return EPOLLOUT from tcp_poll only when notsent_bytes is half the limit [ Upstream commit 8ba3c9d1c6d75d1e6af2087278b30e17f68e1fff ] If there was any event available on the TCP socket, tcp_poll() will be called to retrieve all the events. In tcp_poll(), we call sk_stream_is_writeable() which returns true as long as we are at least one byte below notsent_lowat. This will result in quite a few spurious EPLLOUT and frequent tiny sendmsg() calls as a result. Similar to sk_stream_write_space(), use __sk_stream_is_writeable with a wake value of 1, so that we set EPOLLOUT only if half the space is available for write. Signed-off-by: Soheil Hassas Yeganeh <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Stable-dep-of: e14cadfd80d7 ("tcp: add annotations around sk->sk_shutdown accesses") Signed-off-by: Sasha Levin <[email protected]>
Author: Jerry Snitselaar <[email protected]> Date: Wed May 10 17:54:03 2023 -0700 tpm/tpm_tis: Disable interrupts for more Lenovo devices commit e7d3e5c4b1dd50a70b31524c3228c62bb41bbab2 upstream. The P360 Tiny suffers from an irq storm issue like the T490s, so add an entry for it to tpm_tis_dmi_table, and force polling. There also previously was a report from the previous attempt to enable interrupts that involved a ThinkPad L490. So an entry is added for it as well. Cc: [email protected] Reported-by: Peter Zijlstra <[email protected]> # P360 Tiny Closes: https://lore.kernel.org/linux-integrity/[email protected]/ Signed-off-by: Jerry Snitselaar <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Kuniyuki Iwashima <[email protected]> Date: Tue May 23 09:33:05 2023 -0700 udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated(). commit ad42a35bdfc6d3c0fc4cb4027d7b2757ce665665 upstream. syzbot reported [0] a null-ptr-deref in sk_get_rmem0() while using IPPROTO_UDPLITE (0x88): 14:25:52 executing program 1: r0 = socket$inet6(0xa, 0x80002, 0x88) We had a similar report [1] for probably sk_memory_allocated_add() in __sk_mem_raise_allocated(), and commit c915fe13cbaa ("udplite: fix NULL pointer dereference") fixed it by setting .memory_allocated for udplite_prot and udplitev6_prot. To fix the variant, we need to set either .sysctl_wmem_offset or .sysctl_rmem. Now UDP and UDPLITE share the same value for .memory_allocated, so we use the same .sysctl_wmem_offset for UDP and UDPLITE. [0]: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 6829 Comm: syz-executor.1 Not tainted 6.4.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 RIP: 0010:sk_get_rmem0 include/net/sock.h:2907 [inline] RIP: 0010:__sk_mem_raise_allocated+0x806/0x17a0 net/core/sock.c:3006 Code: c1 ea 03 80 3c 02 00 0f 85 23 0f 00 00 48 8b 44 24 08 48 8b 98 38 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <0f> b6 14 02 48 89 d8 83 e0 07 83 c0 03 38 d0 0f 8d 6f 0a 00 00 8b RSP: 0018:ffffc90005d7f450 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90004d92000 RDX: 0000000000000000 RSI: ffffffff88066482 RDI: ffffffff8e2ccbb8 RBP: ffff8880173f7000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000030000 R13: 0000000000000001 R14: 0000000000000340 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9800000(0063) knlGS:00000000f7f1cb40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 000000002e82f000 CR3: 0000000034ff0000 CR4: 00000000003506f0 Call Trace: <TASK> __sk_mem_schedule+0x6c/0xe0 net/core/sock.c:3077 udp_rmem_schedule net/ipv4/udp.c:1539 [inline] __udp_enqueue_schedule_skb+0x776/0xb30 net/ipv4/udp.c:1581 __udpv6_queue_rcv_skb net/ipv6/udp.c:666 [inline] udpv6_queue_rcv_one_skb+0xc39/0x16c0 net/ipv6/udp.c:775 udpv6_queue_rcv_skb+0x194/0xa10 net/ipv6/udp.c:793 __udp6_lib_mcast_deliver net/ipv6/udp.c:906 [inline] __udp6_lib_rcv+0x1bda/0x2bd0 net/ipv6/udp.c:1013 ip6_protocol_deliver_rcu+0x2e7/0x1250 net/ipv6/ip6_input.c:437 ip6_input_finish+0x150/0x2f0 net/ipv6/ip6_input.c:482 NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ip6_input+0xa0/0xd0 net/ipv6/ip6_input.c:491 ip6_mc_input+0x40b/0xf50 net/ipv6/ip6_input.c:585 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ipv6_rcv+0x250/0x380 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5491 __netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5605 netif_receive_skb_internal net/core/dev.c:5691 [inline] netif_receive_skb+0x133/0x7a0 net/core/dev.c:5750 tun_rx_batched+0x4b3/0x7a0 drivers/net/tun.c:1553 tun_get_user+0x2452/0x39c0 drivers/net/tun.c:1989 tun_chr_write_iter+0xdf/0x200 drivers/net/tun.c:2035 call_write_iter include/linux/fs.h:1868 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x945/0xd50 fs/read_write.c:584 ksys_write+0x12b/0x250 fs/read_write.c:637 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 entry_SYSENTER_compat_after_hwframe+0x70/0x82 RIP: 0023:0xf7f21579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 RSP: 002b:00000000f7f1c590 EFLAGS: 00000282 ORIG_RAX: 0000000000000004 RAX: ffffffffffffffda RBX: 00000000000000c8 RCX: 0000000020000040 RDX: 0000000000000083 RSI: 00000000f734e000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: Link: https://lore.kernel.org/netdev/CANaxB-yCk8hhP68L4Q2nFOJht8sqgXGGQO2AftpHs0u1xyGG5A@mail.gmail.com/ [1] Fixes: 850cbaddb52d ("udp: use it's own memory accounting schema") Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=444ca0907e96f7c5e48b Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Maxime Bizon <[email protected]> Date: Fri May 5 13:47:59 2023 +0200 usb-storage: fix deadlock when a scsi command timeouts more than once commit a398d5eac6984316e71474e25b975688f282379b upstream. With faulty usb-storage devices, read/write can timeout, in that case the SCSI layer will abort and re-issue the command. USB storage has no internal timeout, it relies on SCSI layer aborting commands via .eh_abort_handler() for non those responsive devices. After two consecutive timeouts of the same command, SCSI layer calls .eh_device_reset_handler(), without calling .eh_abort_handler() first. With usb-storage, this causes a deadlock: -> .eh_device_reset_handler -> device_reset -> mutex_lock(&(us->dev_mutex)); mutex already by usb_stor_control_thread(), which is waiting for command completion: -> usb_stor_control_thread (mutex taken here) -> usb_stor_invoke_transport -> usb_stor_Bulk_transport -> usb_stor_bulk_srb -> usb_stor_bulk_transfer_sglist -> usb_sg_wait Make sure we cancel any pending command in .eh_device_reset_handler() to avoid this. Signed-off-by: Maxime Bizon <[email protected]> Cc: [email protected] Cc: stable <[email protected]> Link: https://lore.kernel.org/all/ZEllnjMKT8ulZbJh@sakura/ Reviewed-by: Alan Stern <[email protected]> Acked-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Alan Stern <[email protected]> Date: Mon Apr 10 15:37:07 2023 -0400 USB: core: Add routines for endpoint checks in old drivers commit 13890626501ffda22b18213ddaf7930473da5792 upstream. Many of the older USB drivers in the Linux USB stack were written based simply on a vendor's device specification. They use the endpoint information in the spec and assume these endpoints will always be present, with the properties listed, in any device matching the given vendor and product IDs. While that may have been true back then, with spoofing and fuzzing it is not true any more. More and more we are finding that those old drivers need to perform at least a minimum of checking before they try to use any endpoint other than ep0. To make this checking as simple as possible, we now add a couple of utility routines to the USB core. usb_check_bulk_endpoints() and usb_check_int_endpoints() take an interface pointer together with a list of endpoint addresses (numbers and directions). They check that the interface's current alternate setting includes endpoints with those addresses and that each of these endpoints has the right type: bulk or interrupt, respectively. Although we already have usb_find_common_endpoints() and related routines meant for a similar purpose, they are not well suited for this kind of checking. Those routines find endpoints of various kinds, but only one (either the first or the last) of each kind, and they don't verify that the endpoints' addresses agree with what the caller expects. In theory the new routines could be more general: They could take a particular altsetting as their argument instead of always using the interface's current altsetting. In practice I think this won't matter too much; multiple altsettings tend to be used for transferring media (audio or visual) over isochronous endpoints, not bulk or interrupt. Drivers for such devices will generally require more sophisticated checking than these simplistic routines provide. Signed-off-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Jon Hunter <[email protected]> Date: Thu Feb 9 12:53:18 2023 +0000 usb: gadget: u_ether: Convert prints to device prints [ Upstream commit 938fc645317632d79c048608689683b5437496ea ] The USB ethernet gadget driver implements its own print macros which call printk. Device drivers should use the device prints that print the device name. Fortunately, the same macro names are defined in the header file 'linux/usb/composite.h' and these use the device prints. Therefore, remove the local definitions in the USB ethernet gadget driver and use those in 'linux/usb/composite.h'. The only difference is that now the device name is printed instead of the ethernet interface name. Tested using ethernet gadget on Jetson AGX Orin. Signed-off-by: Jon Hunter <[email protected]> Tested-by: Jon Hunter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Stable-dep-of: 3c0f4f09c063 ("usb: gadget: u_ether: Fix host MAC address case") Signed-off-by: Sasha Levin <[email protected]>
Author: Konrad Gräfe <[email protected]> Date: Fri May 5 16:36:40 2023 +0200 usb: gadget: u_ether: Fix host MAC address case [ Upstream commit 3c0f4f09c063e143822393d99cb2b19a85451c07 ] The CDC-ECM specification [1] requires to send the host MAC address as an uppercase hexadecimal string in chapter "5.4 Ethernet Networking Functional Descriptor": The Unicode character is chosen from the set of values 30h through 39h and 41h through 46h (0-9 and A-F). However, snprintf(.., "%pm", ..) generates a lowercase MAC address string. While most host drivers are tolerant to this, UsbNcm.sys on Windows 10 is not. Instead it uses a different MAC address with all bytes set to zero including and after the first byte containing a lowercase letter. On Windows 11 Microsoft fixed it, but apparently they did not backport the fix. This change fixes the issue by upper-casing the MAC to comply with the specification. [1]: https://www.usb.org/document-library/class-definitions-communication-devices-12, file ECM120.pdf Fixes: bcd4a1c40bee ("usb: gadget: u_ether: construct with default values and add setters/getters") Cc: [email protected] Signed-off-by: Konrad Gräfe <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Alan Stern <[email protected]> Date: Mon Apr 10 15:38:22 2023 -0400 USB: sisusbvga: Add endpoint checks commit df05a9b05e466a46725564528b277d0c570d0104 upstream. The syzbot fuzzer was able to provoke a WARNING from the sisusbvga driver: ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 1 PID: 26 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU: 1 PID: 26 Comm: kworker/1:1 Not tainted 6.2.0-rc5-syzkaller-00199-g5af6ce704936 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Code: 7c 24 18 e8 6c 50 80 fb 48 8b 7c 24 18 e8 62 1a 01 ff 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 60 b1 fa 8a e8 84 b0 be 03 <0f> 0b e9 58 f8 ff ff e8 3e 50 80 fb 48 81 c5 c0 05 00 00 e9 84 f7 RSP: 0018:ffffc90000a1ed18 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff888012783a80 RSI: ffffffff816680ec RDI: fffff52000143d95 RBP: ffff888079020000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000080000000 R11: 0000000000000000 R12: 0000000000000003 R13: ffff888017d33370 R14: 0000000000000003 R15: ffff888021213600 FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005592753a60b0 CR3: 0000000022899000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sisusb_bulkout_msg drivers/usb/misc/sisusbvga/sisusbvga.c:224 [inline] sisusb_send_bulk_msg.constprop.0+0x904/0x1230 drivers/usb/misc/sisusbvga/sisusbvga.c:379 sisusb_send_bridge_packet drivers/usb/misc/sisusbvga/sisusbvga.c:567 [inline] sisusb_do_init_gfxdevice drivers/usb/misc/sisusbvga/sisusbvga.c:2077 [inline] sisusb_init_gfxdevice+0x87b/0x4000 drivers/usb/misc/sisusbvga/sisusbvga.c:2177 sisusb_probe+0x9cd/0xbe2 drivers/usb/misc/sisusbvga/sisusbvga.c:2869 ... The problem was caused by the fact that the driver does not check whether the endpoints it uses are actually present and have the appropriate types. This can be fixed by adding a simple check of the endpoints. Link: https://syzkaller.appspot.com/bug?extid=23be03b56c5259385d79 Reported-and-tested-by: [email protected] Signed-off-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Badhri Jagan Sridharan <[email protected]> Date: Mon May 8 21:44:43 2023 +0000 usb: typec: altmodes/displayport: fix pin_assignment_show commit d8f28269dd4bf9b55c3fb376ae31512730a96fce upstream. This patch fixes negative indexing of buf array in pin_assignment_show when get_current_pin_assignments returns 0 i.e. no compatible pin assignments are found. BUG: KASAN: use-after-free in pin_assignment_show+0x26c/0x33c ... Call trace: dump_backtrace+0x110/0x204 dump_stack_lvl+0x84/0xbc print_report+0x358/0x974 kasan_report+0x9c/0xfc __do_kernel_fault+0xd4/0x2d4 do_bad_area+0x48/0x168 do_tag_check_fault+0x24/0x38 do_mem_abort+0x6c/0x14c el1_abort+0x44/0x68 el1h_64_sync_handler+0x64/0xa4 el1h_64_sync+0x78/0x7c pin_assignment_show+0x26c/0x33c dev_attr_show+0x50/0xc0 Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: [email protected] Signed-off-by: Badhri Jagan Sridharan <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Frank Wang <[email protected]> Date: Thu Mar 16 16:11:49 2023 +0800 usb: typec: tcpm: fix multiple times discover svids error [ Upstream commit dac3b192107b978198e89ec0f77375738352e0c8 ] PD3.0 Spec 6.4.4.3.2 say that only Responder supports 12 or more SVIDs, the Discover SVIDs Command Shall be executed multiple times until a Discover SVIDs VDO is returned ending either with a SVID value of 0x0000 in the last part of the last VDO or with a VDO containing two SVIDs with values of 0x0000. In the current implementation, if the last VDO does not find that the Discover SVIDs Command would be executed multiple times even if the Responder SVIDs are less than 12, and we found some odd dockers just meet this case. So fix it. Acked-by: Heikki Krogerus <[email protected]> Signed-off-by: Frank Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: George Kennedy <[email protected]> Date: Fri May 12 06:08:48 2023 -0500 vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF [ Upstream commit 8fb9ea65c9d1338b0d2bb0a9122dc942cdd32357 ] After a call to console_unlock() in vcs_write() the vc_data struct can be freed by vc_port_destruct(). Because of that, the struct vc_data pointer must be reloaded in the while loop in vcs_write() after console_lock() to avoid a UAF when vcs_size() is called. Syzkaller reported a UAF in vcs_size(). BUG: KASAN: slab-use-after-free in vcs_size (drivers/tty/vt/vc_screen.c:215) Read of size 4 at addr ffff8880beab89a8 by task repro_vcs_size/4119 Call Trace: <TASK> __asan_report_load4_noabort (mm/kasan/report_generic.c:380) vcs_size (drivers/tty/vt/vc_screen.c:215) vcs_write (drivers/tty/vt/vc_screen.c:664) vfs_write (fs/read_write.c:582 fs/read_write.c:564) ... <TASK> Allocated by task 1213: kmalloc_trace (mm/slab_common.c:1064) vc_allocate (./include/linux/slab.h:559 ./include/linux/slab.h:680 drivers/tty/vt/vt.c:1078 drivers/tty/vt/vt.c:1058) con_install (drivers/tty/vt/vt.c:3334) tty_init_dev (drivers/tty/tty_io.c:1303 drivers/tty/tty_io.c:1415 drivers/tty/tty_io.c:1392) tty_open (drivers/tty/tty_io.c:2082 drivers/tty/tty_io.c:2128) chrdev_open (fs/char_dev.c:415) do_dentry_open (fs/open.c:921) vfs_open (fs/open.c:1052) ... Freed by task 4116: kfree (mm/slab_common.c:1016) vc_port_destruct (drivers/tty/vt/vt.c:1044) tty_port_destructor (drivers/tty/tty_port.c:296) tty_port_put (drivers/tty/tty_port.c:312) vt_disallocate_all (drivers/tty/vt/vt_ioctl.c:662 (discriminator 2)) vt_ioctl (drivers/tty/vt/vt_ioctl.c:903) tty_ioctl (drivers/tty/tty_io.c:2778) ... The buggy address belongs to the object at ffff8880beab8800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 424 bytes inside of freed 1024-byte region [ffff8880beab8800, ffff8880beab8c00) The buggy address belongs to the physical page: page:00000000afc77580 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xbeab8 head:00000000afc77580 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 000fffffc0010200 ffff888100042dc0 ffffea000426de00 dead000000000002 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880beab8880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880beab8900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880beab8980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880beab8a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880beab8a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Disabling lock debugging due to kernel taint Fixes: ac751efa6a0d ("console: rename acquire/release_console_sem() to console_lock/unlock()") Cc: stable <[email protected]> Reported-by: syzkaller <[email protected]> Signed-off-by: George Kennedy <[email protected]> Reviewed-by: Thomas Weißschuh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Jiri Slaby <[email protected]> Date: Tue Aug 18 10:56:55 2020 +0200 vc_screen: rewrite vcs_size to accept vc, not inode [ Upstream commit 71d4abfab322e827a75304431fe0fad3c805cb80 ] It is weird to fetch the information from the inode over and over. Read and write already have the needed information, so rewrite vcs_size to accept a vc, attr and unicode and adapt vcs_lseek to that. Also make sure all sites check the return value of vcs_size for errors. And document it using kernel-doc. Signed-off-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Stable-dep-of: 8fb9ea65c9d1 ("vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF") Signed-off-by: Sasha Levin <[email protected]>
Author: Eric Dumazet <[email protected]> Date: Tue May 16 14:23:42 2023 +0000 vlan: fix a potential uninit-value in vlan_dev_hard_start_xmit() [ Upstream commit dacab578c7c6cd06c50c89dfa36b0e0f10decd4e ] syzbot triggered the following splat [1], sending an empty message through pppoe_sendmsg(). When VLAN_FLAG_REORDER_HDR flag is set, vlan_dev_hard_header() does not push extra bytes for the VLAN header, because vlan is offloaded. Unfortunately vlan_dev_hard_start_xmit() first reads veth->h_vlan_proto before testing (vlan->flags & VLAN_FLAG_REORDER_HDR). We need to swap the two conditions. [1] BUG: KMSAN: uninit-value in vlan_dev_hard_start_xmit+0x171/0x7f0 net/8021q/vlan_dev.c:111 vlan_dev_hard_start_xmit+0x171/0x7f0 net/8021q/vlan_dev.c:111 __netdev_start_xmit include/linux/netdevice.h:4883 [inline] netdev_start_xmit include/linux/netdevice.h:4897 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x253/0xa20 net/core/dev.c:3596 __dev_queue_xmit+0x3c7f/0x5ac0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3053 [inline] pppoe_sendmsg+0xa93/0xb80 drivers/net/ppp/pppoe.c:900 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmmsg+0x411/0xa50 net/socket.c:2641 __do_sys_sendmmsg net/socket.c:2670 [inline] __se_sys_sendmmsg net/socket.c:2667 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook+0x12d/0xb60 mm/slab.h:774 slab_alloc_node mm/slub.c:3452 [inline] kmem_cache_alloc_node+0x543/0xab0 mm/slub.c:3497 kmalloc_reserve+0x148/0x470 net/core/skbuff.c:520 __alloc_skb+0x3a7/0x850 net/core/skbuff.c:606 alloc_skb include/linux/skbuff.h:1277 [inline] sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2583 pppoe_sendmsg+0x3af/0xb80 drivers/net/ppp/pppoe.c:867 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmmsg+0x411/0xa50 net/socket.c:2641 __do_sys_sendmmsg net/socket.c:2670 [inline] __se_sys_sendmmsg net/socket.c:2667 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 0 PID: 29770 Comm: syz-executor.0 Not tainted 6.3.0-rc6-syzkaller-gc478e5b17829 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Zhuang Shengen <[email protected]> Date: Thu May 11 19:34:30 2023 +0800 vsock: avoid to close connected socket after the timeout [ Upstream commit 6d4486efe9c69626cab423456169e250a5cd3af5 ] When client and server establish a connection through vsock, the client send a request to the server to initiate the connection, then start a timer to wait for the server's response. When the server's RESPONSE message arrives, the timer also times out and exits. The server's RESPONSE message is processed first, and the connection is established. However, the client's timer also times out, the original processing logic of the client is to directly set the state of this vsock to CLOSE and return ETIMEDOUT. It will not notify the server when the port is released, causing the server port remain. when client's vsock_connect timeout，it should check sk state is ESTABLISHED or not. if sk state is ESTABLISHED, it means the connection is established, the client should not set the sk state to CLOSE Note: I encountered this issue on kernel-4.18, which can be fixed by this patch. Then I checked the latest code in the community and found similar issue. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Signed-off-by: Zhuang Shengen <[email protected]> Reviewed-by: Stefano Garzarella <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Hector Martin <[email protected]> Date: Tue Feb 14 18:24:19 2023 +0900 wifi: brcmfmac: cfg80211: Pass the PMK in binary instead of hex [ Upstream commit 89b89e52153fda2733562776c7c9d9d3ebf8dd6d ] Apparently the hex passphrase mechanism does not work on newer chips/firmware (e.g. BCM4387). It seems there was a simple way of passing it in binary all along, so use that and avoid the hexification. OpenBSD has been doing it like this from the beginning, so this should work on all chips. Also clear the structure before setting the PMK. This was leaking uninitialized stack contents to the device. Reviewed-by: Linus Walleij <[email protected]> Reviewed-by: Arend van Spriel <[email protected]> Signed-off-by: Hector Martin <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
Author: Hans de Goede <[email protected]> Date: Tue Apr 18 15:25:46 2023 +0200 wifi: iwlwifi: dvm: Fix memcpy: detected field-spanning write backtrace [ Upstream commit ef16799640865f937719f0771c93be5dca18adc6 ] A received TKIP key may be up to 32 bytes because it may contain MIC rx/tx keys too. These are not used by iwl and copying these over overflows the iwl_keyinfo.key field. Add a check to not copy more data to iwl_keyinfo.key then will fit. This fixes backtraces like this one: memcpy: detected field-spanning write (size 32) of single field "sta_cmd.key.key" at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 (size 16) WARNING: CPU: 1 PID: 946 at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 iwlagn_send_sta_key+0x375/0x390 [iwldvm] <snip> Hardware name: Dell Inc. Latitude E6430/0H3MT5, BIOS A21 05/08/2017 RIP: 0010:iwlagn_send_sta_key+0x375/0x390 [iwldvm] <snip> Call Trace: <TASK> iwl_set_dynamic_key+0x1f0/0x220 [iwldvm] iwlagn_mac_set_key+0x1e4/0x280 [iwldvm] drv_set_key+0xa4/0x1b0 [mac80211] ieee80211_key_enable_hw_accel+0xa8/0x2d0 [mac80211] ieee80211_key_replace+0x22d/0x8e0 [mac80211] <snip> Link: https://www.alionet.org/index.php?topic=1469.0 Link: https://lore.kernel.org/linux-wireless/[email protected]/ Link: https://lore.kernel.org/linux-wireless/[email protected]/ Cc: Kees Cook <[email protected]> Suggested-by: Johannes Berg <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Author: Dave Hansen <[email protected]> Date: Tue May 16 12:24:25 2023 -0700 x86/mm: Avoid incomplete Global INVLPG flushes commit ce0b15d11ad837fbacc5356941712218e38a0a83 upstream. The INVLPG instruction is used to invalidate TLB entries for a specified virtual address. When PCIDs are enabled, INVLPG is supposed to invalidate TLB entries for the specified address for both the current PCID *and* Global entries. (Note: Only kernel mappings set Global=1.) Unfortunately, some INVLPG implementations can leave Global translations unflushed when PCIDs are enabled. As a workaround, never enable PCIDs on affected processors. I expect there to eventually be microcode mitigations to replace this software workaround. However, the exact version numbers where that will happen are not known today. Once the version numbers are set in stone, the processor list can be tweaked to only disable PCIDs on affected processors with affected microcode. Note: if anyone wants a quick fix that doesn't require patching, just stick 'nopcid' on your kernel command-line. Signed-off-by: Dave Hansen <[email protected]> Reviewed-by: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Daniel Sneddon <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Vernon Lovejoy <[email protected]> Date: Fri May 12 12:42:32 2023 +0200 x86/show_trace_log_lvl: Ensure stack pointer is aligned, again commit 2e4be0d011f21593c6b316806779ba1eba2cd7e0 upstream. The commit e335bb51cc15 ("x86/unwind: Ensure stack pointer is aligned") tried to align the stack pointer in show_trace_log_lvl(), otherwise the "stack < stack_info.end" check can't guarantee that the last read does not go past the end of the stack. However, we have the same problem with the initial value of the stack pointer, it can also be unaligned. So without this patch this trivial kernel module #include <linux/module.h> static int init(void) { asm volatile("sub $0x4,%rsp"); dump_stack(); asm volatile("add $0x4,%rsp"); return -EAGAIN; } module_init(init); MODULE_LICENSE("GPL"); crashes the kernel. Fixes: e335bb51cc15 ("x86/unwind: Ensure stack pointer is aligned") Signed-off-by: Vernon Lovejoy <[email protected]> Signed-off-by: Oleg Nesterov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Josh Poimboeuf <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Author: Dan Carpenter <[email protected]> Date: Wed May 3 18:11:35 2023 +0300 xen/pvcalls-back: fix double frees with pvcalls_new_active_socket() commit 8fafac202d18230bb9926bda48e563fd2cce2a4f upstream. In the pvcalls_new_active_socket() function, most error paths call pvcalls_back_release_active(fedata->dev, fedata, map) which calls sock_release() on "sock". The bug is that the caller also frees sock. Fix this by making every error path in pvcalls_new_active_socket() release the sock, and don't free it in the caller. Fixes: 5db4d286a8ef ("xen/pvcalls: implement connect command") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>