The four functions
dlopen(),
dlsym(),
dlclose(),
dlerror()
implement the interface to the dynamic linking loader.
dlerror()
The function
dlerror()
returns a human readable string describing the most recent error
that occurred from
dlopen(),
dlsym()
or
dlclose()
since the last call to
dlerror().
It returns NULL if no errors have occurred since initialization or since
it was last called.
dlopen()
The function
dlopen()
loads the dynamic library file named by the null-terminated
string
filename
and returns an opaque "handle" for the dynamic library.
If
filename
is NULL, then the returned handle is for the main program.
If
filename
contains a slash ("/"), then it is interpreted as a (relative
or absolute) pathname.
Otherwise, the dynamic linker searches for the library as follows
(see
ld.so(8)
for further details):
o
(ELF only) If the executable file for the calling program
contains a DT_RPATH tag, and does not contain a DT_RUNPATH tag,
then the directories listed in the DT_RPATH tag are searched.
o
If, at the time that the program was started, the environment variable
LD_LIBRARY_PATH
was defined to contain a colon-separated list of directories,
then these are searched.
(As a security measure this variable is ignored for set-user-ID and
set-group-ID programs.)
o
(ELF only) If the executable file for the calling program
contains a DT_RUNPATH tag, then the directories listed in that tag
are searched.
o
The cache file
/etc/ld.so.cache
(maintained by
ldconfig(8))
is checked to see whether it contains an entry for
filename.
o
The directories
/lib
and
/usr/lib
are searched (in that order).
If the library has dependencies on other shared libraries,
then these are also automatically loaded by the dynamic linker
using the same rules.
(This process may occur recursively,
if those libraries in turn have dependencies, and so on.)
One of the following two values must be included in
flag:
RTLD_LAZY
Perform lazy binding.
Only resolve symbols as the code that references them is executed.
If the symbol is never referenced, then it is never resolved.
(Lazy binding is only performed for function references;
references to variables are always immediately bound when
the library is loaded.)
RTLD_NOW
If this value is specified, or the environment variable
LD_BIND_NOW
is set to a non-empty string,
all undefined symbols in the library are resolved before
dlopen()
returns.
If this cannot be done, an error is returned.
Zero of more of the following values may also be ORed in
flag:
RTLD_GLOBAL
The symbols defined by this library will be
made available for symbol resolution of subsequently loaded libraries.
RTLD_LOCAL
This is the converse of
RTLD_GLOBAL,
and the default if neither flag is specified.
Symbols defined in this library are not made available to resolve
references in subsequently loaded libraries.
RTLD_NODELETE (since glibc 2.2)
Do not unload the library during
dlclose().
Consequently, the library's static variables are not reinitialized
if the library is reloaded with
dlopen()
at a later time.
This flag is not specified in POSIX.1-2001.
RTLD_NOLOAD (since glibc 2.2)
Don't load the library.
This can be used to test if the library is already resident
(dlopen()
returns NULL if it is not, or the library's handle if it is resident).
This flag can also be used to promote the flags on a library
that is already loaded.
For example, a library that was previously loaded with
RTLD_LOCAL
can be re-opened with
RTLD_NOLOAD | RTLD_GLOBAL.
This flag is not specified in POSIX.1-2001.
RTLD_DEEPBIND (since glibc 2.3.4)
Place the lookup scope of the symbols in this
library ahead of the global scope.
This means that a self-contained library will use
its own symbols in preference to global symbols with the same name
contained in libraries that have already been loaded.
This flag is not specified in POSIX.1-2001.
If
filename
is a NULL pointer, then the returned handle is for the main program.
When given to
dlsym(),
this handle causes a search for a symbol in the main program,
followed by all shared libraries loaded at program startup,
and then all shared libraries loaded by
dlopen()
with the flag
RTLD_GLOBAL.
External references in the library are resolved using the libraries
in that library's dependency list and any other libraries previously
opened with the
RTLD_GLOBAL
flag.
If the executable was linked with the flag "-rdynamic"
(or, synonymously, "--export-dynamic"),
then the global symbols in the executable will also be used
to resolve references in a dynamically loaded library.
If the same library is loaded again with
dlopen(),
the same file handle is returned.
The dl library maintains reference
counts for library handles, so a dynamic library is not
deallocated until
dlclose()
has been called on it as many times as
dlopen()
has succeeded on it.
The
_init()
routine, if present, is only called once.
But a subsequent call with
RTLD_NOW
may force symbol resolution for a library earlier loaded with
RTLD_LAZY.
If
dlopen()
fails for any reason, it returns NULL.
dlsym()
The function
dlsym()
takes a "handle" of a dynamic library returned by
dlopen()
and the
null-terminated symbol name, returning the address where that symbol is
loaded into memory.
If the symbol is not found, in the specified
library or any of the libraries that were automatically loaded by
dlopen()
when that library was loaded,
dlsym()
returns NULL.
(The search performed by
dlsym()
is breadth first through the dependency tree of these libraries.)
Since the value of the symbol could actually be NULL (so that a
NULL return from
dlsym()
need not indicate an error), the correct way to test for an error
is to call
dlerror()
to clear any old error conditions, then call
dlsym(),
and then call
dlerror()
again, saving its return value into a variable, and check whether
this saved value is not NULL.
There are two special pseudo-handles,
RTLD_DEFAULT
and
RTLD_NEXT.
The former will find the first occurrence of the desired symbol
using the default library search order.
The latter
will find the next occurrence of a function in the search order
after the current library.
This allows one to provide a wrapper
around a function in another shared library.
dlclose()
The function
dlclose()
decrements the reference count on the dynamic library handle
handle.
If the reference count drops to zero and no other loaded libraries use
symbols in it, then the dynamic library is unloaded.
The function
dlclose()
returns 0 on success, and non-zero on error.
The obsolete symbols _init() and _fini()
The linker recognizes special symbols
_init
and
_fini.
If a dynamic library exports a routine named
_init(),
then that code is executed after the loading, before
dlopen()
returns.
If the dynamic library exports a routine named
_fini(),
then that routine is called just before the library is unloaded.
In case you need to avoid linking against the system startup files,
this can be done by using the
gcc(1)
-nostartfiles
command-line option.
Using these routines, or the gcc
-nostartfiles
or
-nostdlib
options, is not recommended.
Their use may result in undesired behavior,
since the constructor/destructor routines will not be executed
(unless special measures are taken).
Instead, libraries should export routines using the
__attribute__((constructor))
and
__attribute__((destructor))
function attributes.
See the gcc info pages for information on these.
Constructor routines are executed before
dlopen()
returns, and destructor routines are executed before
dlclose()
returns.
Glibc extensions: dladdr() and dlvsym()
Glibc adds two functions not described by POSIX, with prototypes
The function
dladdr()
takes a function pointer and tries to resolve name
and file where it is located.
Information is stored in the
Dl_info
structure:
typedef struct {
const char *dli_fname; /* Pathname of shared object that
contains address */
void *dli_fbase; /* Address at which shared object
is loaded */
const char *dli_sname; /* Name of nearest symbol with address
lower than addr */
void *dli_saddr; /* Exact address of symbol named
in dli_sname */
} Dl_info;
If no symbol matching
addr
could be found, then
dli_sname
and
dli_saddr
are set to NULL.
dladdr()
returns 0 on error, and non-zero on success.
The function
dlvsym(),
provided by glibc since version 2.1,
does the same as
dlsym()
but takes a version string as an additional argument.
CONFORMING TO
POSIX.1-2001 describes
dlclose(),
dlerror(),
dlopen(),
and
dlsym().
NOTES
The symbols
RTLD_DEFAULT
and
RTLD_NEXT
are defined by
<dlfcn.h>
only when
_GNU_SOURCE
was defined before including it.
Since glibc 2.2.3,
atexit(3)
can be used to register an exit handler that is automatically
called when a library is unloaded.
History
The dlopen interface standard comes from SunOS.
That system also has
dladdr(),
but not
dlvsym().
EXAMPLE
Load the math library, and print the cosine of 2.0:
#include <stdio.h>
#include <stdlib.h>
#include <dlfcn.h>
int
main(int argc, char **argv)
{
void *handle;
double (*cosine)(double);
char *error;
handle = dlopen("libm.so", RTLD_LAZY);
if (!handle) {
fprintf(stderr, "%s\n", dlerror());
exit(EXIT_FAILURE);
}
dlerror(); /* Clear any existing error */
/* Writing: cosine = (double (*)(double)) dlsym(handle, "cos");
would seem more natural, but the C99 standard leaves
casting from "void *" to a function pointer undefined.
The assignment used below is the POSIX.1-2003 (Technical
Corrigendum 1) workaround; see the Rationale for the
POSIX specification of dlsym(). */
*(void **) (&cosine) = dlsym(handle, "cos");
if ((error = dlerror()) != NULL) {
fprintf(stderr, "%s\n", error);
exit(EXIT_FAILURE);
}
printf("%f\n", (*cosine)(2.0));
dlclose(handle);
exit(EXIT_SUCCESS);
}
If this program were in a file named "foo.c", you would build the program
with the following command:
gcc -rdynamic -o foo foo.c -ldl
Libraries exporting
_init()
and
_fini()
will want to be compiled as
follows, using bar.c as the example name:
This page is part of release 3.14 of the Linux
man-pages
project.
A description of the project,
and information about reporting bugs,
can be found at
http://www.kernel.org/doc/man-pages/.