Интерактивная система просмотра системных руководств (man-ов) bgpd (8) >> bgpd ( Linux man: Команды системного администрирования )
NAME
bgpd - a BGPv4, BGPv4+, BGPv4- routing engine for use with Zebra
SYNOPSIS
bgpd
[
-dhpPv
]
[
-f config-file
]
[
-p bgp-port-number
]
[
--bgp_port=port-number
]
[
-P vty-port-number
]
DESCBGPTION
bgpd
is a routing component that works with the
zebra
routing engine.
OPTIONS
-d , --daemon
Runs in daemon mode, forking and exiting from tty.
-f , --config-file config-file
Specifies the config file to use for startup. If not specified this
option will likely default to /usr/local/etc/bgpd.conf .
-h , --help
A brief message.
-p , --bgp_port= port
Set the port that bgpd will listen to for bgp data.
-P , --vty_port port-number
Specify the port that the bgpd VTY will listen on. This defaults to
2605, as specified in /etc/services .
-r , --retain
When the program terminates, retain routes added by bgpd .
-v , --version
Print the version and exit.
COMMANDS
router zebra -- (Move routes into kernel table)
router bgp [AS-NUMBER]
bgp router-id [BGP-ROUTER-ID]
network [NETWORK] area [BGP-AREA-ID]
no network [NETWORK]
aggregate-address [NETWORK]
neighbor [PEER-IP-ADDRESS] remote-as [REMOTE-AS]
neighbor [PEER-IP-ADDRESS] version [ 4 | 4+ | 4- ]
neighbor [PEER-IP-ADDRESS] description
no neighbor [PEER-IP-ADDRESS] description
neighbor [PEER-IP-ADDRESS] route-map [in | out]
neighbor [PEER-IP-ADDRESS] distribute-list [in | out]
neighbor [PEER-IP-ADDRESS] next-hop-self
neighbor [PEER-IP-ADDRESS] weight [WEIGHT]
neighbor [PEER-IP-ADDRESS] default-originate
neighbor [PEER-IP-ADDRESS] ebgp-multihop
neighbor [PEER-IP-ADDRESS] shutdown
no neighbor [PEER-IP-ADDRESS] shutdown
clear ip bgp [PEER-IP-ADDRESS]
show ip bgp [NETWORK]
show ip bgp reg-exp [AS-REGEXP]
show ip bgp summary
show ip bgp neighbor [PEER-IP-ADDRESS]
show ip bgp route
show debug
debug bgp
debug event
debug update
debug keepalive
no debug event
no debug update
no debug keepalive
FILES
/usr/local/sbin/bgpd
The default location of the
bgpd
binary.
/usr/local/etc/bgpd.conf
The default location of the
bgpd
config file.
$(PWD)/bgpd.log
If the
bgpd
process is config'd to output logs to a file, then you will find this
file in the directory where you started bgpd .
WARNING
This man page is intended as a quick reference for command line
options, and for config file commands. The definitive document is the
Info file zebra .
DIAGNOSTICS
The bgpd process may log to standard output, to a VTY, to a log
file, or through syslog to the system logs. bgpd supports many
debugging options, see the Info file, or the source for details.
SEE ALSO
References to other related man pages:
ripd (8), ripngd (8), ospfd (8), ospf6d (8), zebra (8), vtysh (1)
BUGS
bgpd
eats bugs for breakfast. If you have food for the maintainers try
<[email protected]
AUTHOR[S]
See <www.zebra.org
Index
NAME
SYNOPSIS
DESCBGPTION
OPTIONS
COMMANDS
FILES
WARNING
DIAGNOSTICS
SEE ALSO
BUGS
AUTHOR[S]
