The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

форумы  помощь  поиск  регистрация  майллист  ВХОД  слежка  RSS
"Подвисание при загрузке"
Вариант для распечатки  
Пред. тема | След. тема 
Форумы OpenNET: Виртуальная конференция (Public)
Изначальное сообщение [Проследить за развитием треда]

"Подвисание при загрузке" 
Сообщение от Stealth_OCS emailИскать по авторуВ закладки(ok) on 21-Апр-05, 12:10  (MSK)
Помогите пожалуйста при загрузке зависает система.

log:
$ dmesg

FreeBSD 5.2.1-RELEASE #3: Mon Nov 22 16:10:42 MSK 2004
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08b7000.
MPTable: <ASUS     PROD00000000>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.00GHz (1993.55-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 1073717248 (1023 MB)
avail memory = 1033859072 (985 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID:  0
cpu1 (AP): APIC ID:  1
cpu2 (AP): APIC ID:  6
cpu3 (AP): APIC ID:  7
ioapic0: Changing APIC ID to 8
ioapic0: Assuming intbase of 0
ioapic1: Changing APIC ID to 9
ioapic1: Assuming intbase of 16
ioapic2: Changing APIC ID to 10
ioapic2: Assuming intbase of 32
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00f1ad0
pcib0: <MPTable Host-PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib0: slot 2 INTA routed to irq 18
pcib0: slot 3 INTA routed to irq 46
pcib0: slot 15 INTA routed to irq 11
fxp0: <Intel 82551 Pro/100 Ethernet> port 0xd800-0xd83f mem 0xfd000000-0xfd01ffff,0xfd800000-0xfd800fff irq 18 at device 2.0 on pci0
fxp0: Ethernet address 00:0c:6e:2e:d3:53
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <display, VGA> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 UDMA100 controller> port 0xa800-0xa80f,0xb000-0xb003,0xb400-0xb407,0xb800-0xb803,0xd000-0xd007 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
ohci0: <OHCI (generic) USB controller> mem 0xfb000000-0xfb000fff irq 11 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib23: <MPTable Host-PCI bridge> at pcibus 23 on motherboard
pci23: <PCI bus> on pcib23
pcib23: slot 2 INTA routed to irq 19
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0x9400-0x941f mem 0xf7800000-0xf781ffff,0xf8000000-0xf801ffff irq 19 at device 2.0 on pci23
em0:  Speed:N/A  Duplex:N/A
pcib24: <ServerWorks host to PCI bridge(unknown chipset)> at pcibus 24 on motherboard
pci24: <PCI bus> on pcib24
pcib5: <ServerWorks host to PCI bridge(unknown chipset)> at pcibus 5 on motherboard
pci5: <PCI bus> on pcib5
pcib18: <MPTable Host-PCI bridge> at pcibus 18 on motherboard
pci18: <PCI bus> on pcib18
pcib18: slot 4 INTA routed to irq 22
pcib18: slot 4 INTB routed to irq 23
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xa000-0xa0ff mem 0xf9800000-0xf980ffff,0xfa000000-0xfa00ffff irq 22 at device 4.0 on pci18
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x9800-0x98ff mem 0xf8800000-0xf880ffff,0xf9000000-0xf900ffff irq 23 at device 4.1 on pci18
orm0: <Option ROMs> at iomem 0xcc000-0xcf7ff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
GEOM: create disk ad0 dp=0xc56d5d60
ad0: 114473MB <ST3120026A> [232581/16/63] at ata0-master PIO4
acd0: CDROM <TEAC CD-552E> at ata1-master UDMA33
Waiting 15 seconds for SCSI devices to settle
GEOM: create disk da0 dp=0xc582e850
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
da0 at mpt0 bus 0 target 0 lun 0
da0: <SEAGATE ST336607LW 0005> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
Mounting root from ufs:/dev/da0s3a
WARNING: /home was not properly dismounted
em0: Link is up 100 Mbps Full Duplex
Вот здесь висим до <Control+C>
Далее все нормально..
ACPI отключен, иначе не работает IDE жесткий диск.

fstab:
# Device                Mountpoint      FStype  Options         Dump    Pass#
/dev/da0s1b             none            swap    sw              0       0
/dev/da0s3a             /               ufs     rw              0       0
/dev/da0s4d             /db             ufs     rw              0       0
/dev/da0s3e             /home           ufs     rw              0       0
/dev/da0s2d             /tmp            ufs     rw              0       0
/dev/da0s3f             /usr            ufs     rw              0       0
/dev/da0s3d             /var            ufs     rw              0       0
/dev/acd0               /cdrom          cd9660  ro,noauto       0       0
/dev/ad0s2d             /home           ufs     rw              0       0

fsck делал, проблем не нашел :(
Заранее Спасибо!

  Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

 Оглавление

Индекс форумов | Темы | Пред. тема | След. тема
Сообщения по теме

1. "Подвисание при загрузке" 
Сообщение от denn emailИскать по авторуВ закладки(??) on 21-Апр-05, 16:09  (MSK)
поглядеть бы rc.conf
  Удалить Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

2. "Подвисание при загрузке" 
Сообщение от Brainbug Искать по авторуВ закладки(ok) on 21-Апр-05, 16:17  (MSK)
>Помогите пожалуйста при загрузке зависает система.
>
>log:
>$ dmesg
>
>FreeBSD 5.2.1-RELEASE #3: Mon Nov 22 16:10:42 MSK 2004
>Preloaded elf kernel "/boot/kernel/kernel" at 0xc08b7000.
>MPTable: <ASUS     PROD00000000>
>Timecounter "i8254" frequency 1193182 Hz quality 0
>CPU: Intel(R) Xeon(TM) CPU 2.00GHz (1993.55-MHz 686-class CPU)
>  Origin = "GenuineIntel"  Id = 0xf27  Stepping =
>7
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Hyperthreading: 2 logical CPUs
>real memory  = 1073717248 (1023 MB)
>avail memory = 1033859072 (985 MB)
>FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> cpu0 (BSP): APIC ID:  0
> cpu1 (AP): APIC ID:  1
> cpu2 (AP): APIC ID:  6
> cpu3 (AP): APIC ID:  7
>ioapic0: Changing APIC ID to 8
>ioapic0: Assuming intbase of 0
>ioapic1: Changing APIC ID to 9
>ioapic1: Assuming intbase of 16
>ioapic2: Changing APIC ID to 10
>ioapic2: Assuming intbase of 32
>ioapic0 <Version 1.1> irqs 0-15 on motherboard
>ioapic1 <Version 1.1> irqs 16-31 on motherboard
>ioapic2 <Version 1.1> irqs 32-47 on motherboard
>Pentium Pro MTRR support enabled
>npx0: [FAST]
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>pcibios: BIOS version 2.10
>Using $PIR table, 11 entries at 0xc00f1ad0
>pcib0: <MPTable Host-PCI bridge> at pcibus 0 on motherboard
>pci0: <PCI bus> on pcib0
>pcib0: slot 2 INTA routed to irq 18
>pcib0: slot 3 INTA routed to irq 46
>pcib0: slot 15 INTA routed to irq 11
>fxp0: <Intel 82551 Pro/100 Ethernet> port 0xd800-0xd83f mem 0xfd000000-0xfd01ffff,0xfd800000-0xfd800fff irq 18 at device 2.0 on pci0
>fxp0: Ethernet address 00:0c:6e:2e:d3:53
>miibus0: <MII bus> on fxp0
>inphy0: <i82555 10/100 media interface> on miibus0
>inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>pci0: <display, VGA> at device 3.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 15.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <ServerWorks CSB5 UDMA100 controller> port 0xa800-0xa80f,0xb000-0xb003,0xb400-0xb407,0xb800-0xb803,0xd000-0xd007 at device 15.1 on pci0
>ata0: at 0x1f0 irq 14 on atapci0
>ata0: [MPSAFE]
>ata1: at 0x170 irq 15 on atapci0
>ata1: [MPSAFE]
>ohci0: <OHCI (generic) USB controller> mem 0xfb000000-0xfb000fff irq 11 at device 15.2 on pci0
>usb0: OHCI version 1.0, legacy support
>usb0: SMM does not respond, resetting
>usb0: <OHCI (generic) USB controller> on ohci0
>usb0: USB revision 1.0
>uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 4 ports with 4 removable, self powered
>pcib23: <MPTable Host-PCI bridge> at pcibus 23 on motherboard
>pci23: <PCI bus> on pcib23
>pcib23: slot 2 INTA routed to irq 19
>em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0x9400-0x941f mem 0xf7800000-0xf781ffff,0xf8000000-0xf801ffff irq 19 at device 2.0 on pci23
>em0:  Speed:N/A  Duplex:N/A
>pcib24: <ServerWorks host to PCI bridge(unknown chipset)> at pcibus 24 on motherboard
>pci24: <PCI bus> on pcib24
>pcib5: <ServerWorks host to PCI bridge(unknown chipset)> at pcibus 5 on motherboard
>pci5: <PCI bus> on pcib5
>pcib18: <MPTable Host-PCI bridge> at pcibus 18 on motherboard
>pci18: <PCI bus> on pcib18
>pcib18: slot 4 INTA routed to irq 22
>pcib18: slot 4 INTB routed to irq 23
>mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xa000-0xa0ff mem 0xf9800000-0xf980ffff,0xfa000000-0xfa00ffff irq 22 at device 4.0 on pci18
>mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x9800-0x98ff mem 0xf8800000-0xf880ffff,0xf9000000-0xf900ffff irq 23 at device 4.1 on pci18
>orm0: <Option ROMs> at iomem 0xcc000-0xcf7ff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
>pmtimer0 on isa0
>atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
>kbd0 at atkbd0
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: model Generic PS/2 mouse, device ID 0
>fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
>fdc0: FIFO enabled, 8 bytes threshold
>fd0: <1440-KB 3.5" drive> on fdc0 drive 0
>ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
>ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
>ppc0: FIFO with 16/16/8 bytes threshold
>ppbus0: <Parallel port bus> on ppc0
>plip0: <PLIP network interface> on ppbus0
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>ppi0: <Parallel I/O> on ppbus0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>sio0: type 16550A
>sio1 at port 0x2f8-0x2ff irq 3 on isa0
>sio1: type 16550A
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>unknown: <PNP0401> can't assign resources (port)
>unknown: <PNP0501> can't assign resources (port)
>unknown: <PNP0501> can't assign resources (port)
>unknown: <PNP0700> can't assign resources (port)
>unknown: <PNP0f13> can't assign resources (irq)
>unknown: <PNP0303> can't assign resources (port)
>unknown: <PNP0c02> can't assign resources (port)
>Timecounters tick every 10.000 msec
>ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited
>to 100 packets/entry by default
>GEOM: create disk ad0 dp=0xc56d5d60
>ad0: 114473MB <ST3120026A> [232581/16/63] at ata0-master PIO4
>acd0: CDROM <TEAC CD-552E> at ata1-master UDMA33
>Waiting 15 seconds for SCSI devices to settle
>GEOM: create disk da0 dp=0xc582e850
>SMP: AP CPU #1 Launched!
>SMP: AP CPU #3 Launched!
>SMP: AP CPU #2 Launched!
>da0 at mpt0 bus 0 target 0 lun 0
>da0: <SEAGATE ST336607LW 0005> Fixed Direct Access SCSI-3 device
>da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
>da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
>Mounting root from ufs:/dev/da0s3a
>WARNING: /home was not properly dismounted
>em0: Link is up 100 Mbps Full Duplex
>Вот здесь висим до <Control+C>
>Далее все нормально..
>ACPI отключен, иначе не работает IDE жесткий диск.
>
>fstab:
># Device          
>     Mountpoint      
>FStype  Options        
>Dump    Pass#
>/dev/da0s1b            
> none          
>  swap    sw    
>         0  
>     0
>/dev/da0s3a            
> /          
>     ufs     rw
>          
>  0       0
>/dev/da0s4d            
> /db          
>   ufs     rw  
>          
>0       0
>/dev/da0s3e            
> /home          
> ufs     rw    
>         0  
>     0
>/dev/da0s2d            
> /tmp          
>  ufs     rw    
>          0
>      0
>/dev/da0s3f            
> /usr          
>  ufs     rw    
>          0
>      0
>/dev/da0s3d            
> /var          
>  ufs     rw    
>          0
>      0
>/dev/acd0            
>   /cdrom        
>  cd9660  ro,noauto      
>0       0
>/dev/ad0s2d            
> /home          
> ufs     rw    
>         0  
>     0
>
>fsck делал, проблем не нашел :(
>Заранее Спасибо!

1. Pri zagruzke vistav verbose rezim.
2. echo 'rc_debug="YES"' >> /etc/rc.conf && shutdown -r now

  Удалить Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх

3. "Подвисание при загрузке" 
Сообщение от Stealth_OCS emailИскать по авторуВ закладки(ok) on 27-Апр-05, 09:54  (MSK)
>>Помогите пожалуйста при загрузке зависает система.
>>
>1. Pri zagruzke vistav verbose rezim.
>2. echo 'rc_debug="YES"' >> /etc/rc.conf && shutdown -r now

Спасибо, это был sendmail. ipfw не давал доступ.
Еще раз спасибо.

  Удалить Правка | Высказать мнение | Ответить | Рекомендовать в FAQ | Cообщить модератору | Наверх


Архив | Удалить

Индекс форумов | Темы | Пред. тема | След. тема
Оцените тред (1=ужас, 5=супер)? [ 1 | 2 | 3 | 4 | 5 ]
Пожалуйста, прежде чем написать сообщение, ознакомьтесь с данными рекомендациями.




Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей 		Created 1996-2025 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру