# set these to your outside interface network and netmask and ip
oif="fxp0"
onet="88.xxx.xxx.72"
omask="255.255.255.248"
oip="88.xxx.xxx.74" # set these to your inside interface network and netmask and ip
iif="vr0"
inet="10.10.0.0"
imask="255.255.255.0"
iip="10.10.0.200"
setup_loopback
# Stop spoofing
${fwcmd} add deny all from ${inet}:${imask} to any in via ${oif}
${fwcmd} add deny all from ${onet}:${omask} to any in via ${iif}
# Stop RFC1918 nets on the outside interface
${fwcmd} add deny all from any to 10.0.0.0/8 via ${oif}
${fwcmd} add deny all from any to 172.16.0.0/12 via ${oif}
${fwcmd} add deny all from any to 192.168.0.0/16 via ${oif}
# Stop draft-manning-dsua-03.txt (1 May 2000) nets (includes RESERVED-1,
# DHCP auto-configuration, NET-TEST, MULTICAST (class D), and class E)
# on the outside interface
${fwcmd} add deny all from any to 0.0.0.0/8 via ${oif}
${fwcmd} add deny all from any to 169.254.0.0/16 via ${oif}
${fwcmd} add deny all from any to 192.0.2.0/24 via ${oif}
${fwcmd} add deny all from any to 224.0.0.0/4 via ${oif}
${fwcmd} add deny all from any to 240.0.0.0/4 via ${oif}
# Network Address Translation. This rule is placed here deliberately
# so that it does not interfere with the surrounding address-checking
# rules. If for example one of your internal LAN machines had its IP
# address set to 192.0.2.1 then an incoming packet for it after being
# translated by natd(8) would match the `deny' rule above. Similarly
# an outgoing packet originated from it before being translated would
# match the `deny' rule below.
case ${natd_enable} in
[Yy][Ee][Ss])
if [ -n "${natd_interface}" ]; then
${fwcmd} add divert natd all from any to any via ${natd_interface}
fi
;;
esac
# Stop RFC1918 nets on the outside interface
${fwcmd} add deny all from 10.0.0.0/8 to any via ${oif}
${fwcmd} add deny all from 172.16.0.0/12 to any via ${oif}
${fwcmd} add deny all from 192.168.0.0/16 to any via ${oif}
# Stop draft-manning-dsua-03.txt (1 May 2000) nets (includes RESERVED-1,
# DHCP auto-configuration, NET-TEST, MULTICAST (class D), and class E)
# on the outside interface
${fwcmd} add deny all from 0.0.0.0/8 to any via ${oif}
${fwcmd} add deny all from 169.254.0.0/16 to any via ${oif}
${fwcmd} add deny all from 192.0.2.0/24 to any via ${oif}
${fwcmd} add deny all from 224.0.0.0/4 to any via ${oif}
${fwcmd} add deny all from 240.0.0.0/4 to any via ${oif}
# Allow TCP through if setup succeeded
${fwcmd} add pass tcp from any to any established
# Allow IP fragments to pass through
${fwcmd} add pass all from any to any frag
# 21 FTP and ICMP
${fwcmd} add pass tcp from any to ${oip} 21 setup
${fwcmd} add pass tcp from any to ${oip} 49152-65535 setup
${fwcmd} add pass icmp from any to any icmptypes 0,8,11
# 22 SSH
${fwcmd} add pass tcp from any to ${oip} 22 setup
# Allow setup of incoming email
${fwcmd} add pass tcp from any to ${oip} 25 setup
# Allow access to our DNS
${fwcmd} add pass tcp from any to ${oip} 53 setup
${fwcmd} add pass udp from any to ${oip} 53
${fwcmd} add pass udp from ${oip} 53 to any
# Allow access to our WWW
${fwcmd} add pass tcp from any to ${oip} 80 setup
# Reject&Log all setup of incoming connections from the outside
${fwcmd} add deny log tcp from any to any in via ${oif} setup
# Allow setup of any other TCP connection
${fwcmd} add pass tcp from any to any setup
# Allow DNS queries out in the world
${fwcmd} add pass udp from ${oip} to any 53 keep-state
# Allow NTP queries out in the world
${fwcmd} add pass udp from ${oip} to any 123 keep-state
# Everything else is denied by default, unless the
# IPFIREWALL_DEFAULT_TO_ACCEPT option is set in your kernel
# config file.
;;
Вариант для распечатки
OpenNET: Виртуальная конференция (Public)
(ok) on 24-Янв-08, 18:14 
