Помогите!!!! Взял portslave последний c sourseforge, xtradius поставил

Портслейв запускается - звоню терминалкой на него - берет трубу - а дальше пусто :( - не спрашивает не логин не пасс. - Вроде не запускается pppd-radius???

Sep 18 15:39:11 gate-vkab port[S1]: portslave started on port 1 (/dev/ttyS1)
Sep 18 15:39:13 gate-vkab port[S1]: chatarray: 10 words
Sep 18 15:39:13 gate-vkab port[S1]: Cleaned abort list.
Sep 18 15:39:13 gate-vkab port[S1]: chatarray: special word: TIMEOUT, index: 0, code: 0, req.
words: 2
Sep 18 15:39:13 gate-vkab port[S1]: chatarray: special word: ABORT, index: 3, code: 3, req.
words: 2
Sep 18 15:39:13 gate-vkab port[S1]: Added abort string "NO CARRIER".
Sep 18 15:39:13 gate-vkab port[S1]: chatarray: special word: ABORT, index: 3, code: 3, req.
words: 2
Sep 18 15:39:13 gate-vkab port[S1]: Added abort string "VOICE".
Sep 18 15:39:13 gate-vkab port[S1]: chat_expect(, 10)
Sep 18 15:39:13 gate-vkab port[S1]: chat_expect - got it
Sep 18 15:39:13 gate-vkab port[S1]: chat_send(\d\l\dATV1S0=1)
Sep 18 15:39:16 gate-vkab port[S1]: chat_expect(OK^M , 10)
Sep 18 15:39:16 gate-vkab port[S1]: chat_expect - got it
Sep 18 15:39:16 gate-vkab port[S1]: chat_send()
Sep 18 15:39:16 gate-vkab port[S1]: Connected - waiting for login

вот конфиг портслейва

# pslave.conf   Here is the sample server configuration file.
#
# Version:      2001.09.09

# IP address - if left empty, uses the IP address of the system (hostname).
# This is used as the "local" address for SLIP and PPP connections.
#
# used to be conf.ipno
all.loc_host    192.168.0.1

# If you set this to "yes", you can always login locally by putting a '!'
# before your loginname. Useful for emergencies when the RADIUS server is down.
#
all.locallogins yes

# Logging stuff - this program can use a remote syslog daemon if needed.
# If you want to log locally leave the "syslog" field empty. The facility
# field is an integer between 0 and 7 and sets the syslog facility to
# local0-local7.
#
#all.syslog     logger.someisp.com
all.syslog
all.facility    2

# Directory where your scripts that set up IP filtering (typically using
# ipfwadmin) are stored. To invoke them, just add the RADIUS-attribute
# Framed-Filter-Id = "foo" to your profile, where foo is the name of script.
#
all.filterdir   /usr/local/etc/filters

## The all entry is used as a template for all others. This means that
## setting all.debug to "2", you set s0.debug, s1.debug, s2.debug etc.
## to "2". It also means that all these settings can be overridden on a
## per-port basis below.

# Debugging output to syslog. Set to 0, 1, or 2.  2 is pretty verbose.
#
all.debug       2

# Authentication type - either "radius" or "none".
#
all.authtype    radius

conf.pppd /usr/local/sbin/pppd-radius

# Default is to accept NULL passwords when doing radius authentication. Set
# to "0" or "1". This option does not have effect on non-radius
# authentication - i.e. if "authtype" is "none" or if you do a local login.
#
all.radnullpass yes

# Authentication host and accounting host. We can have 2 of both. The
# first one is always tried three times before switching to the second one.
# They are alternately tried after that, upto maximum 10 times in total.
# Timeout is 3 seconds per query.
#
all.authhost1   localhost
all.accthost1   localhost
#all.authhost2  backuphost.someisp.com
#all.accthost2  backuphost.someisp.com

# Timeout when waiting for response for an authentication or accounting
# requests. The default is 3 seconds.
#
all.radtimeout  3

# The shared secret for RADIUS.
#
all.secret      testing123

# Default protocol and host.
#
all.protocol    ppp

# Default IP stuff. If you end the "rem_host" with a "+", the portnumber will
# be added to the IP number. The IP number of a port is used when the RADIUS
# server doesn't send an IP number, or if it tells us to use a dynamic ipno.
#
# Leave the netmask at 255.255.255.255, unless your really know what
# you're doing.
#
# all.rem_host used to be all.ipno
all.rem_host    192.168.0.65+
all.netmask     255.255.255.255
all.mtu         1500

# Standard message that is issued on connect.
#
all.issue       \n\
                Portslave Internet Services\n\
\n\
     Welcome to terminal server %h port S%p \n\
\n\
Customer Support: 123-555-1212     http://www.myisp.net/\n\
\n

# If you want portslave to update the wtmp file just
# like a regular getty/login, set this to yes.
#
all.syswtmp     yes

## Options for the serial port.

# Porttype (passed to radius server for logging).
# async, sync, isdn, isdn-v120, isdn-v110
#
all.porttype    async

# Speed. All ports are set to 8N1.
#
all.speed       38400

# Use this to initialize the connection
#
# d == delay (1 sec), p == pause (0.1 sec), l == toggle DTR
# r == <CR>, l == <LF>
#
all.initchat    TIMEOUT 10 \
                ABORT "NO CARRIER" \
                ABORT VOICE \
                "" \d\l\dATV1S0=1 \
                OK\r\n-ATV1S0=1-OK\r\n ""

#               TIMEOUT 3600 \
#               RING "" \
#               STATUS Incoming %p:I.HANDSHAKE \
#               "" ATA \
#               TIMEOUT 60 \
#               CONNECT@ "" \
#               STATUS Connected %p:I.HANDSHAKE
#               WAIT DCD \
#               CONNECT@ ""

#all.initchat "" \d\l\dATE1V1S0=1 OK\r\n-ATE1V1S0=1-OK\r\n

# Flow control on this serial port:
#    hard - hardware, rts/cts
#    soft - software, CTRL-S / CTRL-Q
#    none.
#
all.flow        hard

# Use the DCD line or not (this sets CLOCAL if off). This means that the
# session will get hung up if the modem hangs up. Can be set to 0 or 1.
#
all.dcd         yes

# PPP options - used if we autodetect a PPP session.
# Note that we set mru and mtu both to the MTU setting.
#
all.autoppp     proxyarp modem asyncmap 0 %i: \
                noipx noccp login auth require-pap refuse-chap \
                mtu %t mru %t \
                ms-dns 192.168.1.1 ms-dns 192.168.1.2 \
                plugin /usr/local/lib/libpsr.so

## PPP options - User already authenticated and service type is PPP.
#
all.pppopt      proxyarp modem asyncmap 0 %i:%j \
                noipx noccp \
                mtu %t mru %t \
                netmask %m idle %I maxconnect %T \
                ms-dns 192.168.1.1 ms-dns 192.168.1.2 \
                plugin /usr/local/lib/libpsr.so

## Tty names are s0...s63. For every port we need to define a tty port, and
## an IP number for when radius tells us to pick one ourself. Unless you
## use the IP pool option mentioned above (IP number with "+" appended).
##
## Note that you can change _all_ of the above settings that start
## with all.xxxx on a per-port basis, such as issue, prompt etc.
#
s1.tty          ttyS1

• RE: Загибаюсь третий день - portslave не работает, _nick_, 22:55 , 19-Сен-01, (1)