|
| 1.3, Аноним (3), 12:21, 14/05/2005 [ответить]
| +/– |
Натравил на SerialATA
papa # smartctl -i /dev/sda
smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
Device: ATA ST3120026AS Version: 3.05
Serial number: 3JT0PAEH
Device type: disk
Local Time is: Sat May 14 11:20:19 2005 WEST
Device does not support SMART
9-(( | | |
| |
| 2.5, BSW (?), 12:54, 15/05/2005 [^] [^^] [^^^] [ответить]
| +/– | |
Из документации к 5.30:
SATA devices
------------
Currently work OK if you use the standard IDE drivers in
drivers/ide. If you use the new libata drivers, it won't work
correctly because libata doesn't yet support the needed
ATA-passthrough ioctl() calls. Jeff Garzik, the libata developer, says
that this support will be added in the future. When this happens, add
support to smartmontools for a new SATA/libata device type '-d sata'.
Ждем-с.
| | |
| |
| 3.6, mutronix (?), 06:03, 14/06/2005 [^] [^^] [^^^] [ответить]
| +/– | |
из-за отсутствия нормальной поддержки ioctl() hdparm нормально параметры диска не отображает. | | |
|
|
| 1.4, McLone (?), 18:30, 14/05/2005 [ответить]
| +/– |
 vkluchit' SMART:
smartctl -s on /dev/ad0
posmotret' VSE info:
smartctl -a -i /dev/da2
takzhe mozhno popravit' ${PREFIX}/etc/smartd.conf i zajuzat' daemon'a SMARTd. | | |
| 1.7, virus (??), 19:15, 16/01/2006 [ответить]
| +/– |
 а что делать если случайно вместо bad сектора заблокировал весь винт? | | |
|