The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

acpi_toshiba (4)
  • >> acpi_toshiba (4) ( FreeBSD man: Специальные файлы /dev/* )

  • BSD mandoc
     

    NAME

    
    
    acpi_toshiba
    
     - Toshiba HCI interface
    
     
    

    SYNOPSIS

    To compile this driver into the kernel, place the following line in your kernel configuration file:
    device acpi_toshiba

    Alternatively, to load the driver as a module at boot time, place the following line in loader.conf5:

    acpi_toshiba_load="YES"
    
     

    DESCRIPTION

    HCI is Toshiba's Hardware Control Interface which is somewhat uniform across their models. The driver allows the user to manipulate HCI-controlled hardware using a number of sysctl(8) variables.  

    SYSCTL VARIABLES

    The following sysctls are currently implemented:

    hw.acpi.toshiba.force_fan
    Causes active cooling to be forcibly enabled (`1' ) or disabled (`0' ) regardless of the current temperature.
    hw.acpi.toshiba.video_output
    Sets the active display to use according to a bitwise OR of the following:

    0
    No display
    1
    LCD
    2
    CRT
    4
    TV-Out

    Only some systems (i.e., the Libretto L5) support video switching via this hardware-specific driver. Use the acpi_video4 driver for generic video output support.

    hw.acpi.toshiba.lcd_brightness
    Makes the LCD backlight brighter or dimmer (higher values are brighter).
    hw.acpi.toshiba.lcd_backlight
    Turns the LCD backlight on and off.
    hw.acpi.toshiba.cpu_speed
    Sets the CPU speed to the specified speed. This provides functionality similar to the hw.acpi.cpu.throttle_state variable. Higher sysctl values mean lower CPU speeds.

    Defaults for these variables can be set in sysctl.conf5, which is parsed at boot-time.  

    LOADER TUNABLES

    The hw.acpi.toshiba.enable_fn_keys tunable enables or disables the function keys on the keyboard. Function keys are enabled by default.

    This behaviour can be changed at the loader(8) prompt or in loader.conf5.  

    SEE ALSO

    acpi(4), acpi_video4, loader.conf5, sysctl.conf5, sysctl(8)  

    HISTORY

    The driver first appeared in Fx 5.1 .  

    AUTHORS

    An -nosplit The driver was written by An Hiroyuki Aizu Aq [email protected] . This manual page was written by An Philip Paeps Aq [email protected] .


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    SYSCTL VARIABLES
    LOADER TUNABLES
    SEE ALSO
    HISTORY
    AUTHORS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру