The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

cdparanoia (1)
  • >> cdparanoia (1) ( Linux man: Команды и прикладные программы пользовательского уровня )
  •  

    NAME

    cdparanoia - an audio CD reading utility which includes extra data verification features
     
    

    SYNOPSIS

    cdparanoia [options] span [outfile] |-B  

    DESCRIPTION

    cdparanoia retrieves audio tracks from CDDA-capable CDROM drives. The data can be saved to a file or directed to standard output in WAV, AIFF, AIFF-C or raw format. Most ATAPI and SCSI and several proprietary CDROM drive makes are supported; cdparanoia can determine if the target drive is CDDA capable. In addition to simple reading, cdparanoia adds extra-robust data verification, synchronization, error handling and scratch reconstruction capability.  

    OPTIONS

    -v --verbose
    Be absurdly verbose about the autosensing and reading process. Good for setup and debugging.

    -q --quiet
    Do not print any progress or error information during the reading process.

    -e --stderr-progress
    Force output of progress information to stderr (for wrapper scripts).

    -V --version
    Print the program version and quit.

    -Q --query
    Perform CDROM drive autosense, query and print the CDROM table of contents, then quit.

    -s --search-for-drive
    Forces a complete search for a cdrom drive, even if the /dev/cdrom link exists.

    -h --help
    Print a brief synopsis of cdparanoia usage and options.

    -p --output-raw
    Output headerless data as raw 16-bit PCM data with interleaved samples in host byte order. To force little-or big-endian byte order, use -r or -R as described below.

    -r --output-raw-little-endian
    Output headerless data as raw 16-bit PCM data with interleaved samples in LSB-first byte order.

    -R --output-raw-big-endian
    Output headerless data as raw 16-bit PCM data with interleaved samples in MSB-first byte order.

    -w --output-wav
    Output data in Micro$oft RIFF WAV format (note that WAV data is always LSB-first byte order).

    -f --output-aiff
    Output data in Apple AIFF format (note that AIFC data is always in MSB-first byte order).

    -a --output-aifc
    Output data in uncompressed Apple AIFF-C format (note that AIFF-C data is always in MSB-first byte order).

    -B --batch

    Cdda2wav-style batch output flag; cdparanoia will split the output into multiple files at track boundaries. Output file names are prepended with 'track#.'

    -c --force-cdrom-little-endian
    Some CDROM drives misreport their endianness (or do not report it at all); it's possible that cdparanoia will guess wrong. Use -c to force cdparanoia to treat the drive as a little endian device.

    -C --force-cdrom-big-endian
    As above but force cdparanoia to treat the drive as a big endian device.

    -n --force-default-sectors n
    Force the interface backend to do atomic reads of n sectors per read. This number can be misleading; the kernel will often split read requests into multiple atomic reads (the automated Paranoia code is aware of this) or allow reads only within a restricted size range. This option should generally not be used.

    -d --force-cdrom-device device
    Force the interface backend to read from device rather than the first readable CDROM drive it finds. This can be used to specify devices of any valid interface type (ATAPI, SCSI, or proprietary).

    -g --force-generic-device device
    This option forces use of the old 'generic scsi' (sg) kernel interface with the specified generic scsi device. -g may be used with -d to explicitly set both the SCSI cdrom and generic (sg) devices separately. This option is only useful on non-standard SCSI setups and when using the generic scsi (sg) driver.

    -S --force-read-speed number
    Use this option explicitly to set the read rate of the CD drive (where supported). This can reduce underruns on machines which have slow disks, or are low on memory.

    -t --toc-offset number
    Use this option to force the entire disc LBA addressing to shift by the given amount; the value is added to the beginning offsets in the TOC. This can be used to shift track boundaries for the whole disc manually on sector granularity. The next option does something similar...

    -T --toc-bias
    Some drives (usually random Toshibas) report the actual track beginning offset values in the TOC, but then treat the beginning of track 1 index 1 as sector 0 for all read operations. This results in every track seeming to start too late (losing a bit of the beginning and catching a bit of the next track). -T accounts for this behavior. Note that this option will cause cdparanoia to attempt to read sectors before or past the known user data area of the disc, resulting in read errors at disc edges on most drives and possibly even hard lockups on some buggy hardware.

    -O --sample-offset number
    Use this option to force the entire disc to shift sample position output by the given amount; this can be used to shift track boundaries for the whole disc manually on sample granularity. Note that this will cause cdparanoia to attempt to read partial sectors before or past the known user data area of the disc, probably causing read errors on most drives and possibly even hard lockups on some buggy hardware.

    -Z --disable-paranoia
    Disable all data verification and correction features. When using -Z, cdparanoia reads data exactly as would cdda2wav(1) with an overlap setting of zero. This option implies that -Y is active.

    -z --never-skip[=max_retries]
    Do not accept any skips; retry forever if needed. An optional maximum number of retries can be specified; for comparison, default without -z is currently 20.

    -Y --disable-extra-paranoia
    Disables intra-read data verification; only overlap checking at read boundaries is performed. It can wedge if errors occur in the attempted overlap area. Not recommended.

    -X --abort-on-skip
    If the read skips due to imperfect data, a scratch, or whatever, abort reading this track. If output is to a file, delete the partially completed file.

     

    OUTPUT SMILIES


      :-)   
    Normal operation, low/no jitter

      :-|   
    Normal operation, considerable jitter

      :-/   
    Read drift

      :-P   
    Unreported loss of streaming in atomic read operation

      8-|   
    Finding read problems at same point during reread; hard to correct

      :-0   
    SCSI/ATAPI transport error

      :-(   
    Scratch detected

      ;-(   
    Gave up trying to perform a correction

      8-X
    Aborted read due to known, uncorrectable error

      :^D   
    Finished extracting

     

    PROGRESS BAR SYMBOLS

    <space>
    No corrections needed

       -    
    Jitter correction required

       +    
    Unreported loss of streaming/other error in read

       !  
    Errors found after stage 1 correction; the drive is making the same error through multiple re-reads, and cdparanoia is having trouble detecting them.

       e    
    SCSI/ATAPI transport error (corrected)

       V    
    Uncorrected error/skip

     

    SPAN ARGUMENT

    The span argument specifies which track, tracks, or subsections of tracks to read. This argument is required, unless batch-mode is used (in batch-mode, cdparanoia will rip all tracks if no span is given). NOTE: Unless the span is a simple number, it's generally a good idea to quote the span argument to protect it from the shell. The span argument may be a simple track number or an offset/span specification. The syntax of an offset/span takes the rough form: 1[ww:xx:yy.zz]-2[aa:bb:cc.dd] Here, 1 and 2 are track numbers; the numbers in brackets provide a finer-grained offset within a particular track. [aa:bb:cc.dd] is in hours/minutes/seconds/sectors format. Zero fields need not be specified: [::20], [:20], [20], [20.], etc, would be interpreted as twenty seconds, [10:] would be ten minutes, [.30] would be thirty sectors (75 sectors per second). When only a single offset is supplied, it is interpreted as a starting offset and ripping will continue to the end of the track. If a single offset is preceded or followed by a hyphen, the implicit missing offset is taken to be the start or end of the disc, respectively. Thus:

    1:[20.35]
    Specifies ripping from track 1, second 20, sector 35 to the end of track 1.
    1:[20.35]-
    Specifies ripping from 1[20.35] to the end of the disc
    -2
    Specifies ripping from the beginning of the disc up to (and including) track 2
    -2:[30.35]
    Specifies ripping from the beginning of the disc up to 2:[30.35]
    2-4
    Specifies ripping from the beginning of track 2 to the end of track 4. Again, don't forget to protect square brackets from the shell.

     

    EXAMPLES

    A few examples, protected from the shell:

    Query only with exhaustive search for a drive and full reporting of autosense:

           cdparanoia -vsQ
    Extract an entire disc, putting each track in a separate file:

           cdparanoia -B 
    Extract from track 1, time 0:30.12 to 1:10.00:

           cdparanoia "1[:30.12]-1[1:10]"
    Extract from the beginning of the disc up through track 3:

           cdparanoia -- -3
    The "--" above is to distinguish "-3" from an option flag.
     

    OUTPUT

    The output file argument is optional; if it is not specified, cdparanoia will output samples to one of cdda.wav, cdda.aifc, or cdda.raw depending on whether -w, -a, -r or, -R is used (-w is the implicit default). The output file argument of - specifies standard output; all data formats may be piped.

     

    ACKNOWLEDGEMENTS

    cdparanoia sprang from and once drew heavily from the interface of Heiko Eissfeldt's ([email protected]) 'cdda2wav' package. cdparanoia would not have happened without it. Joerg Schilling has also contributed SCSI expertise through his generic SCSI transport library.  

    AUTHOR

    Monty <[email protected]> cdparanoia 's homepage may be found at: http://www.xiph.org/paranoia/


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    OPTIONS
    OUTPUT SMILIES
    PROGRESS BAR SYMBOLS
    SPAN ARGUMENT
    EXAMPLES
    OUTPUT
    ACKNOWLEDGEMENTS
    AUTHOR


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру