The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

color_content (3)
  • color_content (3) ( FreeBSD man: Библиотечные вызовы )
  • >> color_content (3) ( Linux man: Библиотечные вызовы )
  •  

    NAME

    start_color,
    init_pair,
    init_color,
    has_colors,
    can_change_color,
    color_content,
    pair_content,
    COLOR_PAIR - curses color manipulation routines
    
    
     
    

    SYNOPSIS

    # include <curses.h>
    int start_color(void);
    int init_pair(short pair, short f, short b);
    int init_color(short color, short r, short g, short b);
    bool has_colors(void);
    bool can_change_color(void);
    int color_content(short color, short *r, short *g, short *b);
    int pair_content(short pair, short *f, short *b);
     

    DESCRIPTION

     

    Overview

    curses support color attributes on terminals with that capability. To use these routines start_color must be called, usually right after initscr. Colors are always used in pairs (referred to as color-pairs). A color-pair consists of a foreground color (for characters) and a background color (for the blank field on which the characters are displayed). A programmer initializes a color-pair with the routine init_pair. After it has been initialized, COLOR_PAIR(n), a macro defined in <curses.h>, can be used as a new video attribute.

    If a terminal is capable of redefining colors, the programmer can use the routine init_color to change the definition of a color. The routines has_colors and can_change_color return TRUE or FALSE, depending on whether the terminal has color capabilities and whether the programmer can change the colors. The routine color_content allows a programmer to extract the amounts of red, green, and blue components in an initialized color. The routine pair_content allows a programmer to find out how a given color-pair is currently defined.  

    Routine Descriptions

    The start_color routine requires no arguments. It must be called if the programmer wants to use colors, and before any other color manipulation routine is called. It is good practice to call this routine right after initscr. start_color initializes eight basic colors (black, red, green, yellow, blue, magenta, cyan, and white), and two global variables, COLORS and COLOR_PAIRS (respectively defining the maximum number of colors and color-pairs the terminal can support). It also restores the colors on the terminal to the values they had when the terminal was just turned on.

    The init_pair routine changes the definition of a color-pair. It takes three arguments: the number of the color-pair to be changed, the foreground color number, and the background color number. For portable applications:

    -
    The value of the first argument must be between 1 and COLOR_PAIRS-1.
    -
    The value of the second and third arguments must be between 0 and COLORS. Color pair 0 is assumed to be white on black, but is actually whatever the terminal implements before color is initialized. It cannot be modified by the application.

    If the color-pair was previously initialized, the screen is refreshed and all occurrences of that color-pair are changed to the new definition.

    As an extension, ncurses allows you to set color pair 0 via the assume_default_colors routine, or to specify the use of default colors (color number -1) if you first invoke the use_default_colors routine.

    The init_color routine changes the definition of a color. It takes four arguments: the number of the color to be changed followed by three RGB values (for the amounts of red, green, and blue components). The value of the first argument must be between 0 and COLORS. (See the section Colors for the default color index.) Each of the last three arguments must be a value between 0 and 1000. When init_color is used, all occurrences of that color on the screen immediately change to the new definition.

    The has_colors routine requires no arguments. It returns TRUE if the terminal can manipulate colors; otherwise, it returns FALSE. This routine facilitates writing terminal-independent programs. For example, a programmer can use it to decide whether to use color or some other video attribute.

    The can_change_color routine requires no arguments. It returns TRUE if the terminal supports colors and can change their definitions; other, it returns FALSE. This routine facilitates writing terminal-independent programs.

    The color_content routine gives programmers a way to find the intensity of the red, green, and blue (RGB) components in a color. It requires four arguments: the color number, and three addresses of shorts for storing the information about the amounts of red, green, and blue components in the given color. The value of the first argument must be between 0 and COLORS. The values that are stored at the addresses pointed to by the last three arguments are between 0 (no component) and 1000 (maximum amount of component).

    The pair_content routine allows programmers to find out what colors a given color-pair consists of. It requires three arguments: the color-pair number, and two addresses of shorts for storing the foreground and the background color numbers. The value of the first argument must be between 1 and COLOR_PAIRS-1. The values that are stored at the addresses pointed to by the second and third arguments are between 0 and COLORS.  

    Colors

    In <curses.h> the following macros are defined. These are the default colors. curses also assumes that COLOR_BLACK is the default background color for all terminals.

          COLOR_BLACK
          COLOR_RED
          COLOR_GREEN
          COLOR_YELLOW
          COLOR_BLUE
          COLOR_MAGENTA
          COLOR_CYAN
          COLOR_WHITE
    
     

    RETURN VALUE

    The routines can_change_color() and has_colors() return TRUE or FALSE.

    All other routines return the integer ERR upon failure and an OK (SVr4 specifies only "an integer value other than ERR") upon successful completion.

    X/Open defines no error conditions. This implementation will return ERR on attempts to use color values outside the range 0 to COLORS-1 (except for the default colors extension), or use color pairs outside the range 0 to COLOR_PAIR-1. Color values used in init_color must be in the range 0 to 1000. An error is returned from all functions if the terminal has not been initialized. An error is returned from secondary functions such as init_pair if start_color was not called.

    init_color
    returns an error if the terminal does not support this feature, e.g., if the initialize_color capability is absent from the terminal description.
    start_color
    returns an error If the color table cannot be allocated.
     

    NOTES

    In the ncurses implementation, there is a separate color activation flag, color palette, color pairs table, and associated COLORS and COLOR_PAIRS counts for each screen; the start_color function only affects the current screen. The SVr4/XSI interface is not really designed with this in mind, and historical implementations may use a single shared color palette.

    Note that setting an implicit background color via a color pair affects only character cells that a character write operation explicitly touches. To change the background color used when parts of a window are blanked by erasing or scrolling operations, see curs_bkgd(3X).

    Several caveats apply on 386 and 486 machines with VGA-compatible graphics:

    -
    COLOR_YELLOW is actually brown. To get yellow, use COLOR_YELLOW combined with the A_BOLD attribute.
    -
    The A_BLINK attribute should in theory cause the background to go bright. This often fails to work, and even some cards for which it mostly works (such as the Paradise and compatibles) do the wrong thing when you try to set a bright "yellow" background (you get a blinking yellow foreground instead).
    -
    Color RGB values are not settable.
     

    PORTABILITY

    This implementation satisfies XSI Curses's minimum maximums for COLORS and COLOR_PAIRS.

    The init_pair routine accepts negative values of foreground and background color to support the use_default_colors extension, but only if that routine has been first invoked.

    The assumption that COLOR_BLACK is the default background color for all terminals can be modified using the assume_default_colors extension.

    This implementation checks the pointers, e.g., for the values returned by color_content and pair_content, and will treat those as optional parameters when null.  

    SEE ALSO

    curses(3X), curs_initscr(3X), curs_attr(3X), default_colors(3X)


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    Overview
    Routine Descriptions
    Colors
    RETURN VALUE
    NOTES
    PORTABILITY
    SEE ALSO


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру