The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

config_macros (3)
  • >> config_macros (3) ( Linux man: Библиотечные вызовы )
  •  

    NAME

    config_macros - Default configuration: /usr/lib/rpm/macros
    # 
    

    
    #
    # $Id: macros.in,v 1.6 2002/04/05 08:18:40 ldv Exp $
    #
    # This is a global RPM configuration file. All changes made here will
    # be lost when the rpm package is upgraded. Any per-system configuration
    # should be added to /etc/rpm/macros, while per-user configuration should
    # be added to ~/.rpmmacros.
    #
    #==============================================================================
    # Macro naming conventions (preliminary):
    #
    #       Macros that begin with an underscore are 'local' in the sense that
    #       they (if used) will not be exported in rpm headers. Some macros
    #       that don't start with an underscore (but look like they should)
    #       are compatible with macros generated by rpm-2.5.x and will be made
    #       more consistent in a future release.
    #
    
    #==============================================================================
    # ---- A macro that expands to nothing.
    #
    %nil                    %{!?nil}
    
    #==============================================================================
    # ---- filesystem macros.
    #
    %_usr                   /usr
    %_usrsrc                %{_usr}/src
    %_var                   /var
    
    #==============================================================================
    # ---- Generally useful path macros.
    #
    %__awk                  gawk
    %__bzip2                /bin/bzip2
    %__cat                  /bin/cat
    %__chgrp                /bin/chgrp
    %__chmod                /bin/chmod
    %__chown                /bin/chown
    %__cp                   /bin/cp
    %__cpio                 /bin/cpio
    %__file                 /usr/bin/file
    %__gpg                  /usr/bin/gpg
    %__grep                 /bin/grep
    %__gzip                 /bin/gzip
    %__id                   /usr/bin/id
    %__install              /bin/install
    %__install_info         /sbin/install-info
    %__ln_s                 ln -s
    %__make                 /usr/bin/make
    %__mkdir                /bin/mkdir
    %__mkdir_p              /bin/mkdir -p
    %__mv                   /bin/mv
    %__patch                /usr/bin/patch
    %__perl                 /usr/bin/perl
    %__pgp                  /usr/bin/pgp
    %__python               /usr/bin/python
    %__rm                   /bin/rm
    %__rsh                  /usr/bin/rsh
    %__sed                  /bin/sed
    %__ssh                  /usr/bin/ssh
    %__tar                  /bin/tar
    %__unzip                /usr/bin/unzip
    
    #==============================================================================
    # ---- Build system path macros.
    #
    %__ar                   ar
    %__as                   as
    %__cc                   gcc
    %__cpp                  gcc -E
    %__cxx                  c++
    %__ld                   /usr/bin/ld
    %__nm                   /usr/bin/nm
    %__objcopy              /usr/bin/objcopy
    %__objdump              /usr/bin/objdump
    %__ranlib               ranlib
    %__remsh                %{__rsh}
    %__strip                /usr/bin/strip
    
    # XXX avoid failures if tools are not installed when rpm is built.
    %__libtoolize           libtoolize
    %__aclocal              aclocal
    %__autoheader           autoheader
    %__automake             automake
    %__autoconf             autoconf
    
    #==============================================================================
    # ---- Required rpmrc macros.
    #       Macros that used to be initialized as a side effect of rpmrc parsing.
    #       These are the default values that can be overridden by other
    #       (e.g. per-platform, per-system, per-packager, per-package) macros.
    #
    #       The directory where sources/patches will be unpacked and built.
    %_builddir              %{_topdir}/BUILD
    
    #       The interpreter used for build scriptlets.
    %_buildshell            /bin/sh
    
    #       The path to the bzip2 executable (legacy, use %{__bzip2} instead).
    %_bzip2bin              %{__bzip2}
    
    #       The location of the rpm database file(s).
    %_dbpath                %{_var}/lib/rpm
    
    #       The location of the rpm database file(s) after 'rpm --rebuilddb'.
    %_dbpath_rebuild        %{_dbpath}
    
    %_defaultdocdir         %{_datadir}/doc
    
    #
    %__find_provides        /usr/lib/rpm/find-provides
    %__find_requires        /usr/lib/rpm/find-requires
    #%__find_prereq         ???
    #%__find_conflicts      ???
    #%__find_obsoletes      ???
    
    #
    # fixowner, fixgroup, and fixperms are run at the end of hardcoded setup
    # These macros are necessary only for legacy compatibility, and have moved
    # to per-platform macro configuration (i.e. /usr/lib/rpm/<arch>-<os>/macros)
    #%__id_u                %{__id} -u
    #%__chown_Rhf           %{__chown} -Rhf
    #%__chgrp_Rhf           %{__chgrp} -Rhf
    #%_fixowner             [ `%{__id_u}` = '0' ] && %{__chown_Rhf} root
    #%_fixgroup             [ `%{__id_u}` = '0' ] && %{__chgrp_Rhf} root
    #%_fixperms             %{__chmod} -Rf a+rX,g-w,o-w
    #
    
    #       The path to the gzip executable (legacy, use %{__gzip} instead).
    %_gzipbin               %{__gzip}
    
    #       The number of changelog entries kept when installing (legacy, unused in
    #       rpm-4.0.1 and later).
    %_instchangelog         5
    
    #       The path to the pgp executable (legacy, use %{__pgp} instead).
    %_pgpbin                %{__pgp}
    
    #       The directory where newly built binary packages will be written.
    %_rpmdir                %{_topdir}/RPMS
    
    #       A template used to generate the output binary package file name
    #       (legacy).
    %_rpmfilename           %{_build_name_fmt}
    
    #       The default signature type.
    %_signature             gpg
    
    #       The directory where sources/patches from a source package will be
    #       installed. This is also where sources/patches are found when building.
    %_sourcedir             %{_topsrcdir}/SOURCES
    
    #       The directory where the spec file from a source package will be
    #       installed.
    %_specdir               %{_topsrcdir}/SPECS
    
    #       The directory where newly built source packages will be written.
    %_srcrpmdir             %{_topdir}/SRPMS
    
    #       Directory where temporaray files can be created.
    %_tmppath               %{_var}/tmp
    
    #       Path to top of build area.
    %_topdir                %{_usrsrc}/RPM
    
    #       Path to top of spec/source/patch area.
    %_topsrcdir             %{_topdir}
    
    #       The path to the unzip executable (legacy, use %{__unzip} instead).
    %_unzipbin              %{__unzip}
    
    #==============================================================================
    # ---- Optional rpmrc macros.
    #       Macros that are initialized as a side effect of rpmrc and/or spec
    #       file parsing.
    #
    #       Configurable build root path, same as BuildRoot: in a specfile.
    #       (Note: the configured macro value will override the spec file value).
    #
    %buildroot              %{_tmppath}/%{name}-buildroot
    
    #       The sub-directory (relative to %{_builddir}) where sources are compiled.
    #       This macro is set after processing %setup, either explicitly from the
    #       value given to -n or the default name-version.
    #
    #%buildsubdir
    
    #       Configurable distribution information, same as Distribution: tag in a
    #       specfile.
    #
    #%distribution
    
    #       Configurable distribution URL, same as DistURL: tag in a specfile.
    #       The URL will be used to supply reliable information to tools like
    #       rpmfind.
    #
    # Note: You should not configure with disturl (or build packages with
    # the DistURL: tag) unless you are willing to supply content in a
    # yet-to-be-determined format at the URL specified.
    #
    #%disturl
    
    #       Boolean (i.e. 1 == 'yes', 0 == 'no') that controls whether files
    #       marked as %doc should be installed.
    #%_excludedocs
    
    #       The port and machine name of a FTP proxy host running TIS firewall.
    #
    #%_ftpport
    #%_ftpproxy
    
    #       The signature to use and the location of configuration files for
    #       signing packages with GNU gpg.
    #
    #%_gpg_name
    #%_gpg_path
    
    #       The port and machine name of an HTTP proxy host.
    #
    #%_httpport
    #%_httpproxy
    
    #       The PATH put into the environment before running %pre/%post et al.
    #
    %_install_script_path   /sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin
    
    #       A colon separated list of desired locales to be installed;
    #       'all' means install all locale specific files.
    #       
    %_install_langs all
    
    #
    #       Deprecated.
    #
    #%_langpatt
    
    #       A colon separated list of paths where files should *not* be installed.
    #       Usually, these are network file system mount points.
    #
    #%_netsharedpath
    
    #       (experimental)
    #       The type of pattern match used on rpmdb iterator selectors:
    #       'default'       simple glob-like regex, periods will be escaped,
    #                       splats will have period prepended, full '^...$' match
    #                       required. Also, file path tags will use glob(7).
    #       'strcmp'        compare strings
    #       'regex'         regex(7) patterns using regcomp(3)/regexec(3)
    #       'glob'          glob(7) patterns using fnmatch(3)
    #
    %_query_selector_match  default
    
    #       Configurable packager information, same as Packager: in a specfile.
    #
    #%packager
    
    #       Compression type and level for source/binary package payloads.
    #               'w9.gzdio'      gzip level 9 (default).
    #               'w9.bzdio'      bzip2 level 9.
    #
    #%_source_payload       w9.gzdio
    #%_binary_payload       w9.gzdio
    
    #       The signature to use and the location of configuration files for
    #       signing packages with PGP.
    #
    #%_pgp_name
    #%_pgp_path
    
    #       Configurable virtual provides (unimplemented, use Provides: ...
    #       in an rpmrc file).
    #
    #%_provides
    
    #       Deprecated.
    #
    #%_timecheck
    
    #       Configurable vendor information, same as Vendor: in a specfile.
    #
    #%vendor
    
    #==============================================================================
    # ---- Package version macro.
    #       The type of package to produce, for compatibility with legacy
    #       versions of rpm.
    #
    # This is an rpm version, e.g. 30005 means to produce packaging compatible
    # with rpm-3.0.5. At the moment, values < 30005 (i.e. compatibility with
    # version before rpm-3.0.5) are not supported. The only incompatible change
    # in rpm packaging since rpm-3.0.5 has been to replace a 3 with a 4 in the
    # rpmlead, so there's little need to use any value greater than 30005.
    #
    %_package_version       30005
    
    #==============================================================================
    # ---- Database configuration macros.
    #       Macros used to configure Berkley db parameters.
    #
    # rpmdb macro configuration values are a colon (or white space) separated
    # list of tokens, with an optional '!' negation to explicitly disable bit
    # values, or a '=value' if a parameter. A per-tag value is used (e.g.
    # %_dbi_config_Packages) if defined, otherwise a per-rpmdb default
    # (e.g. %_dbi_config). The configuration is also conditioned on the
    # existence of an internal %{_rpmdb_rebuild} switch to permit changing
    # the configuration while rebuilding an rpmdb database.
    #
    # The rpmdb configuration tokens are in a popt table in rpmdb/dbconfig.c,
    # see that for the latest gory details. Note carefully that, unless you
    # are writing an rpm installer, you shouldn't have to touch *any* of these
    # parameters.
    #
    # Here's a short list of the tokens, with a guess of whether the option is
    # useful:
    #       (nothing)       currently used in rpm, known to work.
    #       '+++'           under development, will be supported in rpm eventually.
    #       '???'           I have no clue, you're mostly on your own.
    #
    # If you do find yourself inclined to fiddle, here's what I see (shrug):
    # 1) Only the value of mp_size has any serious impact on overall performance,
    #    and you will need ~256Kb to handle a typical machine install.
    # 2) Only the Packages hash, because of the size of the values (i.e. headers),
    #    will ever need tuning. Diddle the pagesize if you're interested, although
    #    I believe that you will find pagesize=512 'best'.
    # 3) Adding nofsync increases speed, but risks total data loss. Fiddle shared
    #    and/or mp_size instead.
    # 4) btree is faster than hash, but would require some painful rpm release
    #    engineering to convert everbody's databases to btree, not gonna happen
    #    soon.
    #
    # See the db3-devel package, or http://www.sleepycat.com for Berkeley db-3.x
    # documentation.
    #
    #   token       works?  Berkeley db flag or value
    #==================================================
    #---------------------- DBENV->open parameters and tunable values:
    #   mp_mmapsize=8Mb     DBENV->set_mp_mmapsize
    #   mp_size=512Kb       DBENV->set_cachesize
    #---------------------- DBENV->open and DB->open common bits:
    #   create              DB_CREATE
    #   thread      ???     DB_THREAD       (useless w/o posix mutexes on linux)
    #---------------------- DBENV->open bits:
    #   joinenv             DB_JOIN_ENV
    #   mpool               DB_INIT_MPOOL
    #   cdb         +++     DB_INIT_CDB
    #   txn         ???     DB_INIT_TXN
    #   log         ???     DB_INIT_LOG
    #   lock        ???     DB_INIT_LOCK
    #   recover     ???     DB_RECOVER
    #   recover_fatal ???   DB_RECOVER_FATAL
    #   use_environ ???     DB_USE_ENVIRON
    #   use_environ_root ??? DB_USE_ENVIRON_ROOT
    #   private     +++     DB_PRIVATE
    #   lockdown    ???     DB_LOCKDOWN
    #   shared      +++     DB_SYSTEM_MEM
    #---------------------- DB->open parameters and tunable values:
    #   cachesize=512Kb +++ DB->set_cachesize       (meaningless if mp_size is used)
    #   pagesize=512 +++    DB->set_pagesize
    #---------------------- DB->open bits:
    #   excl        ???     DB_EXCL
    #   nommap      ???     DB_NOMMAP
    #   rdonly              DB_RDONLY
    #---------------------- DB->open types:
    #   btree               DB_BTREE
    #   hash                DB_HASH
    #   recno       ???     DB_RECNO
    #   queue       ???     DB_QUEUE
    #   unknown     +++     DB_UNKNOWN
    #---------------------- DB->set_flags bits:
    #   bt_dup      +++     (btree only) DB_DUP
    #   bt_dupsort  +++     (btree only) DB_DUPSORT
    #   ht_dup      +++     (hash only) DB_DUP
    #   ht_dupsort  +++     (hash only) DB_DUPSORT
    #----------------------- rpmdb specific configuration:
    #   usecursors          (always on) Use db3 cursors in get/put/del ?
    #   usedbenv            (always on) Use db3 environment?
    #   verify              (always on, db3 only) Verify db after close?
    #   lockdbfd            (always on for Packages) Use fcntl(2) locking ?
    #   nofsync             Disable fsync(2) call performed after db3 writes?
    #   temporary           Unlink file when closing.
    #
    # XXX Use a CDB database model for concurrent access (under development,
    # cursor teardown with signals needs work, much more besides.)
    #%__dbi_other                   usedbenv create joinenv cdb mpool #                               mp_mmapsize=8Mb mp_size=512Kb verify
    
    # XXX Use transactions and logs for rpmdb durability (no clue yet):
    #%__dbi_other                   usedbenv create joinenv mpool txn log #                               mp_mmapsize=8Mb mp_size=512Kb verify
    
    # XXX enable at your own risk, CDB access to rpmdb isn't cooked yet.
    #%__dbi_cdb                     create joinenv cdb mpool
    
    # XXX The 'traditional' rpmdb shared/exclusive fcntl(2) lock on Packages model:
    %__dbi_other                    verify %{?_tmppath:tmpdir=%{_tmppath}} %{?__dbi_cdb}
    
    # Note: adding nofsync here speeds up --rebuilddb a lot.
    %__dbi_rebuild                  nofsync !log !txn !cdb
    %__dbi_transient                %{__dbi_rebuild} temporary private
    %__dbi_perms                    perms=0644
    
    #
    #--- Hash database configuration
    %__dbi_htconfig   hash            %{__dbi_other}  %{__dbi_perms}%{nil}
    
    %__dbi_htconfig_current         %{__dbi_htconfig}
    %__dbi_htconfig_rebuild         %{__dbi_htconfig} %{__dbi_rebuild}
    
    %_dbi_htconfig            %{?_rpmdb_rebuild:%{__dbi_htconfig_rebuild}}  %{!?_rpmdb_rebuild:%{__dbi_htconfig_current}}%{nil}
    
    #
    #--- Btree database configuration
    %__dbi_btconfig   btree           %{__dbi_other}  %{__dbi_perms}%{nil}
    
    %__dbi_btconfig_current         %{__dbi_btconfig}
    %__dbi_btconfig_rebuild         %{__dbi_btconfig} %{__dbi_rebuild}
    
    %_dbi_btconfig            %{?_rpmdb_rebuild:%{__dbi_btconfig_rebuild}}  %{!?_rpmdb_rebuild:%{__dbi_btconfig_current}}%{nil}
    
    # The list of tags for which indices will be built.
    %_dbi_tags      Packages:Name:Basenames:Group:Requirename:Providename:Conflictname:Triggername:Dirnames:Requireversion:Provideversion:Installtid:Sigmd5:Sha1header:Filemd5s:Depends
    
    # 'Packages' should have shared/exclusive fcntl(2) lock using 'lockdbfd'.
    %_dbi_config_Packages           %{_dbi_htconfig} lockdbfd
    
    # 'Depends' is a per-transaction cache of known dependency resolutions.
    %_dbi_config_Depends            %{_dbi_htconfig} temporary private
    
    %_dbi_config_Dirnames           %{_dbi_btconfig}
    %_dbi_config_Requireversion     %{_dbi_btconfig}
    %_dbi_config_Provideversion     %{_dbi_btconfig}
    %_dbi_config_Installtid         %{_dbi_btconfig}
    %_dbi_config_Removetid          %{_dbi_btconfig}
    
    # XXX legacy configuration.
    # Choose db interface:
    #       3       native db3 interface.
    #
    # There are two macros so that --rebuilddb can convert db1 -> db3.
    #
    %_dbapi                 3
    %_dbapi_rebuild         3
    
    %_dbi_config    %{_dbi_htconfig}
    
    #==============================================================================
    # ---- GPG/PGP/PGP5 signature macros.
    #       Macro(s) to hold the arguments passed to GPG/PGP for package
    #       signing and verification.
    #
    %__gpg_check_password_cmd       %{__gpg}         gpg --batch --no-verbose --passphrase-fd 3 -u '%{_gpg_name}' -so -
    %__pgp_check_password_cmd       %{__pgp}         pgp +batchmode=on +verbose=0 '%{_pgp_name}' -sf
    %__pgp5_check_password_cmd      %{__pgp}         pgps +batchmode=on +verbose=0 +armor=off '%{_pgp_name}' -f
    
    %__gpg_sign_cmd                 %{__gpg}         gpg --batch --no-verbose --no-armor --passphrase-fd 3         -u '%{_gpg_name}' -sbo %{__signature_filename} %{__plaintext_filename}
    %__pgp_sign_cmd                 %{__pgp}         pgp +batchmode=on +verbose=0 +armor=off         '+myname=%{_pgp_name}' -sb %{__plaintext_filename} %{__signature_filename}
    %__pgp5_sign_cmd                %{__pgp}         pgps +batchmode=on +verbose=0 +armor=off         '+myname=%{_pgp_name}' -b %{__plaintext_filename} -o %{__signature_filename}
    
    %__gpg_verify_cmd               %{__gpg}         gpg --batch --no-verbose --verify         %{__signature_filename} %{__plaintext_filename}
    %__pgp_verify_cmd               %{__pgp}         pgp +batchmode=on +verbose=0         %{__signature_filename} %{__plaintext_filename}
    %__pgp5_verify_cmd              %{__pgp}         pgpv +batchmode=on +verbose=0         +OutputInformationFD=1 +OutputWarningFD=1         -o %{__signature_filename} %{__plaintext_filename}
    
    #==============================================================================
    # ---- Transaction macros.
    #       Macro(s) used to parameterize transactions.
    #
    #       The output binary package file name template used when building
    #       binary packages.
    #
    # XXX   Note: escaped %% for use in headerSprintf()
    %_build_name_fmt        %%{ARCH}/%%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.rpm
    
    #       The output binary package file name template used when repackaging
    #       erased packages.
    #
    # XXX   Note: escaped %% for use in headerSprintf()
    %_repackage_name_fmt    %%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.rpm
    
    #       The directory in which erased packages will be saved when using
    #       the --repackage option.
    %_repackage_dir         /var/spool/up2date
    %_repackage_root        %{nil}
    
    #       Relations between package names that cause dependency loops
    #       with legacy packages that cannot be fixed. Relations are
    #       specified as
    #               p>q
    #       where package p has a Requires: on something that package q Provides:
    #
    # XXX   Note: that there cannot be any whitespace within the string 'p>q',
    #       and that both p and q are package names (i.e. no version/release).
    #
    #%_dependency_whiteout_5_2              #       pam>pamconfig
    #%_dependency_whiteout_6_1              #       pilot-link-devel>pilot-link
    #%_dependency_whiteout_6_2              #       egcs-c++>libstdc++
    #%_dependency_whiteout_7_0              #       pango-gtkbeta-devel>pango-gtkbeta#       XFree86>Mesa                    #       compat-glibc>db2                #       compat-glibc>db1                #       pam>initscripts                 #       initscripts>sysklogd
    #%_dependency_whiteout_7_1              #       arts>kdelibs-sound
    #%_dependency_whiteout_7_2              #       libgnomeprint15>gnome-print     #       nautilus>nautilus-mozilla       #       tcl>postgresql-tcl
    #
    #%_dependency_whiteout                  #       libtermcap>bash                 #       modutils>vixie-cron             #       ypbind>yp-tools                 #       ghostscript-fonts>ghostscript   #       %{?_dependency_whiteout_7_2}    #       %{?_dependency_whiteout_7_1}    #       %{?_dependency_whiteout_7_0}    #       %{?_dependency_whiteout_6_2}    #       %{?_dependency_whiteout_6_1}    #       %{?_dependency_whiteout_5_2}    #       %{nil}
    
    #==============================================================================
    # ---- per-platform macros.
    #       Macros that are specific to an individual platform. The values here
    #       will be used if the per-platform macro file does not exist..
    #
    %_arch                  i386
    %_build_arch            i386
    %_vendor                alt
    %_os                    linux
    %_gnu                   -gnu
    %_target_platform       %{_target_cpu}-%{_vendor}-%{_target_os}%{?_gnu}
    
    #
    # Define a generic value for optflags. Normally overridden by per-target macros.
    %optflags               -O2
    
    #
    # Define per-arch and per-os defaults. Normally overridden by per-target macros.
    %__arch_install_post    %{nil}
    %__os_install_post      %{___build_post}
    
    #==============================================================================
    # ---- Scriptlet template templates.
    #       Global defaults used for building scriptlet templates.
    #
    
    %___build_shell         %{?_buildshell:%{_buildshell}}%{!?_buildshell:/bin/sh}
    %___build_args          -e
    %___build_cmd           %{?_sudo:%{_sudo} }%{?_remsh:%{_remsh} %{_remhost} }%{?_remsudo:%{_remsudo} }%{?_remchroot:%{_remchroot} %{_remroot} }%{___build_shell} %{___build_args}
    %___build_pre     export RPM_SOURCE_DIR='%{u2p:%{_sourcedir}}'  export RPM_BUILD_DIR='%{u2p:%{_builddir}}'  export RPM_OPT_FLAGS='%{optflags}'  export RPM_ARCH='%{_arch}'  export RPM_OS='%{_os}'  export RPM_DOC_DIR='%{_docdir}'  export RPM_PACKAGE_NAME='%{name}'  export RPM_PACKAGE_VERSION='%{version}'  export RPM_PACKAGE_RELEASE='%{release}'  %{?buildroot:export RPM_BUILD_ROOT='%{u2p:%{buildroot}}'}  %{?_compress_method:export RPM_COMPRESS_METHOD='%{_compress_method}'}  %{?_strip_method:export RPM_STRIP_METHOD='%{_strip_method}'}  %{?_findreq_method:export RPM_FINDREQ_METHOD='%{_findreq_method}'}  %{?_findprov_method:export RPM_FINDPROV_METHOD='%{_findprov_method}'}  %{?_findreq_default_method:export RPM_FINDREQ_DEFAULT_METHOD='%{_findreq_default_method}'}  %{?_findprov_default_method:export RPM_FINDPROV_DEFAULT_METHOD='%{_findprov_default_method}'}  %{?_perl_lib_path:export RPM_PERL_LIB_PATH='%{_perl_lib_path}'}  %{?__python:export RPM_PYTHON='%{__python}'}    unset LANG LANGUAGE LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT LC_IDENTIFICATION LC_ALL ||:  %{?_build_lang:export LANG='%{_build_lang}'  export LANGUAGE='%{_build_lang}'  export LC_ALL='%{_build_lang}'}    %{verbose:set -x}%{!verbose:exec > /dev/null}  umask 022  cd %{u2p:%{_builddir}}
    
    #%___build_body         %{nil}
    %___build_post          exit 0
    
    %___build_template      #!%{___build_shell}%{___build_pre}%{nil}
    
    #%{___build_body}#%{___build_post}#%{nil}
    
    #==============================================================================
    # ---- Scriptlet templates.
    #       Macro(s) that expand to a command and script that is executed.
    #       CAVEAT: All macro expansions must fit in a BUFSIZ (8192 byte) buffer.
    #
    %__spec_prep_shell      %{___build_shell}
    %__spec_prep_args       %{___build_args}
    %__spec_prep_cmd        %{___build_cmd}
    %__spec_prep_pre        %{___build_pre}
    %__spec_prep_body       %{___build_body}
    %__spec_prep_post       %{___build_post}
    %__spec_prep_template   #!%{__spec_prep_shell}%{__spec_prep_pre}%{nil}
    
    #%{__spec_prep_body}#%{__spec_prep_post}#%{nil}
    
    %__spec_build_shell     %{___build_shell}
    %__spec_build_args      %{___build_args}
    %__spec_build_cmd       %{___build_cmd}
    %__spec_build_pre       %{___build_pre}
    %__spec_build_body      %{___build_body}
    %__spec_build_post      %{___build_post}
    %__spec_build_template  #!%{__spec_build_shell}%{__spec_build_pre}%{nil}
    
    #%{__spec_build_body}#%{__spec_build_post}#%{nil}
    
    %__spec_install_shell   %{___build_shell}
    %__spec_install_args    %{___build_args}
    %__spec_install_cmd     %{___build_cmd}
    %__spec_install_pre     %{___build_pre}
    %__spec_install_body    %{___build_body}
    %__spec_install_post%{__arch_install_post}%{__os_install_post}%{nil}
    %__spec_install_template        #!%{__spec_install_shell}%{__spec_install_pre}%{nil}
    
    #%{__spec_install_body}#%{__spec_install_post}#%{nil}
    
    #%__spec_autodep_shell  %{___build_shell}
    #%__spec_autodep_args   %{___build_args}
    #%__spec_autodep_cmd    %{___build_cmd}
    #%__spec_autodep_pre    %{___build_pre}
    #%__spec_autodep_body   %{___build_body}
    #%__spec_autodep_post   %{___build_post}
    #%__spec_autodep_template       #!%{__spec_autodep_shell}#%{__spec_autodep_pre}#%{nil}
    
    #%{__spec_autodep_body}#%{__spec_autodep_post}#%{nil}
    
    %__spec_clean_shell     %{___build_shell}
    %__spec_clean_args      %{___build_args}
    %__spec_clean_cmd       %{___build_cmd}
    %__spec_clean_pre       %{___build_pre}
    %__spec_clean_body      %{___build_body}
    %__spec_clean_post      %{___build_post}
    %__spec_clean_template  #!%{__spec_clean_shell}%{__spec_clean_pre}%{nil}
    
    #%{__spec_clean_body}#%{__spec_clean_post}#%{nil}
    
    %__spec_rmbuild_shell   %{___build_shell}
    %__spec_rmbuild_args    %{___build_args}
    %__spec_rmbuild_cmd     %{___build_cmd}
    %__spec_rmbuild_pre     %{___build_pre}
    %__spec_rmbuild_body    %{___build_body}
    %__spec_rmbuild_post    %{___build_post}
    %__spec_rmbuild_template        #!%{__spec_rmbuild_shell}%{__spec_rmbuild_pre}%{nil}
    
    #%{__spec_rmbuild_body}#%{__spec_rmbuild_post}#%{nil}
    
    # XXX We don't expand pre/post install scriptlets (yet).
    #%__spec_pre_pre                %{nil}
    #%__spec_pre_post               %{nil}
    #%__spec_post_pre               %{nil}
    #%__spec_post_post              %{nil}
    #%__spec_preun_pre              %{nil}
    #%__spec_preun_post             %{nil}
    #%__spec_postun_pre             %{nil}
    #%__spec_postun_post            %{nil}
    #%__spec_triggerpostun_pre      %{nil}
    #%__spec_triggerpostun_post     %{nil}
    #%__spec_triggerun_pre          %{nil}
    #%__spec_triggerun_post         %{nil}
    #%__spec_triggerin_pre          %{nil}
    #%__spec_triggerin_post         %{nil}
    
    #==============================================================================
    # ---- configure macros.
    #       Macro(s) slavishly copied from autoconf's config.status.
    #
    %_prefix                /usr
    %_exec_prefix           %{_prefix}
    %_bindir                %{_exec_prefix}/bin
    %_sbindir               %{_exec_prefix}/sbin
    %_libexecdir            %{_exec_prefix}/lib
    %_datadir               %{_prefix}/share
    %_sysconfdir            /etc
    %_sharedstatedir        %{_prefix}/com
    %_localstatedir         %{_var}/lib
    %_lib                   lib
    %_libdir                %{_exec_prefix}/%{_lib}
    %_includedir            %{_prefix}/include
    %_oldincludedir         /usr/include
    %_infodir               %{_datadir}/info
    %_mandir                %{_datadir}/man
    
    #==============================================================================
    # ---- config.guess platform macros.
    #       Macro(s) similar to the tokens used by configure.
    #
    %_build                 %{_host}
    %_build_alias           %{_host_alias}
    %_build_cpu             %{_host_cpu}
    %_build_vendor          %{_host_vendor}
    %_build_os              %{_host_os}
    %_host                  i586-alt-linux-gnu
    %_host_alias            i586-alt-linux%{nil}
    %_host_cpu              i586
    %_host_vendor           alt
    %_host_os               linux-gnu
    %_target                %{_host}
    %_target_alias          %{_host_alias}
    %_target_cpu            %{_host_cpu}
    %_target_vendor         %{_host_vendor}
    %_target_os             %{_host_os}
    
    #==============================================================================
    # ---- specfile macros.
    #       Macro(s) here can be used reliably for reproducible builds.
    #       (Note: Above is the goal, below are the macros under development)
    #
    # The configure macro does the following:
    #       optionally change to a subdirectory (not implemented).
    #       attempt to update config.guess and config.sub.
    #       run configure with correct prefix, platform, and CFLAGS.
    #       optionally restore current directory (not implemented).
    # The configure macro should be invoked as %configure (rather than %{configure})
    # because the rest of the arguments will be expanded using %*.
    #
    # This is the version of %configure used through rpm-3.0.4.
    #%configure     #  %{?__libtoolize:[ -f configure.in ] && %{__libtoolize} --copy --force} #  CFLAGS='%{optflags}' ./configure %{_target_platform} --prefix=%{_prefix}
    #
    #------------------------------------------------------------------------------
    %_configure_script      ./configure
    %_configure_target      %{?_gnu: --host=%{_host} --target=%{_target_platform}} %{!?_gnu: %{_target_platform}}
    %_configure_gettext     --without-included-gettext
    # This is an improved version of %configure (from PLD team).
    %configure   CFLAGS='${CFLAGS:-%optflags}' ; export CFLAGS ;   CXXFLAGS='${CXXFLAGS:-%optflags}' ; export CXXFLAGS ;   FFLAGS='${FFLAGS:-%optflags}' ; export FFLAGS ;   %{?__libtoolize:[ -f configure.in ] && %{__libtoolize} --copy --force ;}   ./configure \        %{_configure_script} %{?_configure_target:%{_configure_target}} \        --prefix=%{_prefix} \        --exec-prefix=%{_exec_prefix} \        --bindir=%{_bindir} \        --sbindir=%{_sbindir} \        --sysconfdir=%{_sysconfdir} \        --datadir=%{_datadir} \        --includedir=%{_includedir} \        --libdir=%{_libdir} \        --libexecdir=%{_libexecdir} \        --localstatedir=%{_localstatedir} \        --sharedstatedir=%{_sharedstatedir} \        --mandir=%{_mandir} \        --infodir=%{_infodir} \        %{?_configure_gettext:%{_configure_gettext}}
    
    #------------------------------------------------------------------------------
    # The make install analogue of %configure:
    %_makeinstall_target    install
    %makeinstall   %{__make} INSTALL='%__install -p' \        prefix=%{?buildroot:%{buildroot}}%{_prefix} \        exec_prefix=%{?buildroot:%{buildroot}}%{_exec_prefix} \        bindir=%{?buildroot:%{buildroot}}%{_bindir} \        sbindir=%{?buildroot:%{buildroot}}%{_sbindir} \        sysconfdir=%{?buildroot:%{buildroot}}%{_sysconfdir} \        datadir=%{?buildroot:%{buildroot}}%{_datadir} \        includedir=%{?buildroot:%{buildroot}}%{_includedir} \        libdir=%{?buildroot:%{buildroot}}%{_libdir} \        libexecdir=%{?buildroot:%{buildroot}}%{_libexecdir} \        localstatedir=%{?buildroot:%{buildroot}}%{_localstatedir} \        sharedstatedir=%{?buildroot:%{buildroot}}%{_sharedstatedir} \        mandir=%{?buildroot:%{buildroot}}%{_mandir} \        infodir=%{?buildroot:%{buildroot}}%{_infodir} \  %{?_makeinstall_target:%{_makeinstall_target}}
    
    #------------------------------------------------------------------------------
    # The GNUconfigure macro does the following:
    #       update config.guess and config.sub.
    #       regenerate all autoconf/automake files
    #       optionally change to a directory (make the directory if requested).
    #       run configure with correct prefix, platform, and CFLAGS.
    #       optionally restore current directory.
    #
    # Based on autogen.sh from GNOME and orginal GNUconfigure
    #
    %GNUconfigure(MCs:)        CFLAGS='${CFLAGS:-%optflags}' ; export CFLAGS;   LDFLAGS='${LDFLAGS:-%{-s:-s}}'  ; export LDFLAGS;   %{-C:_mydir='`pwd`'; %{-M: %{__mkdir} -p %{-C*};} cd %{-C*}}   dirs='`find ${_mydir} -name configure.in -print`'; export dirs;     for coin in `echo ${dirs}` do   dr=`dirname ${coin}`; if test -f ${dr}/NO-AUTO-GEN; then  : else      macrodirs=`sed -n -e 's,AM_ACLOCAL_INCLUDE(.*)),1,gp' < ${coin}`;     ( cd ${dr};       aclocalinclude='${ACLOCAL_FLAGS}';       for k in ${macrodirs}; do         if test -d ${k}; then           aclocalinclude='${aclocalinclude} -I ${k}';         ##else         ##  echo '**Warning**: No such directory `${k}'.  Ignored.'         fi       done       if grep '^AM_GNU_GETTEXT' configure.in >/dev/null; then         if grep 'sed.*POTFILES' configure.in >/dev/null; then           : do nothing -- we still have an old unmodified configure.in         else           test -r ${dr}/aclocal.m4 || touch ${dr}/aclocal.m4;           echo 'no' | gettextize --force --copy;           test -r ${dr}/aclocal.m4 && %{__chmod} u+w ${dr}/aclocal.m4;         fi       fi       if grep '^AM_PROG_LIBTOOL' configure.in >/dev/null; then         %{__libtoolize} --force --copy;       fi       aclocal ${aclocalinclude};       if grep '^AM_CONFIG_HEADER' configure.in >/dev/null; then         %{__autoheader};       fi       echo 'Running automake --gnu ${am_opt} ...';       %{__automake} --add-missing --gnu ${am_opt};       %{__autoconf};     );   fi done   %{-C:${_mydir}}%{!-C:.}/configure %{_target_platform} --prefix=%{_prefix} --exec-prefix=%{_exec_prefix} --bindir=%{_bindir} --sbindir=%{_sbindir} --sysconfdir=%{_sysconfdir} --datadir=%{_datadir} --includedir=%{_includedir} --libdir=%{_libdir} --libexecdir=%{_libexecdir} --localstatedir=%{_localstatedir} --sharedstatedir=%{_sharedstatedir} --mandir=%{_mandir} --infodir=%{_infodir} %* ;   %{-C:cd ${_mydir}; unset _mydir}
    
    #------------------------------------------------------------------------------
    # Useful perl macros (from Artur Frysiak <[email protected]>)
    #
    # For example, these can be used as (from ImageMagick.spec from PLD site)
    #       [...]
    #       BuildPrereq: perl
    #       [...]
    #       %package perl
    #       Summary: libraries and modules for access to ImageMagick from perl
    #       Group: Development/Languages/Perl
    #       Requires: %{name} = %{version}
    #       %requires_eq    perl
    #       [...]
    #       %install
    #       rm -fr $RPM_BUILD_ROOT
    #       install -d $RPM_BUILD_ROOT/%{perl_sitearch}
    #       [...]
    #       %files perl
    #       %defattr(644,root,root,755)
    #       %{perl_sitearch}/Image
    #       %dir %{perl_sitearch}/auto/Image
    #
    %requires_eq()  %(LC_ALL='C' echo '%*' | xargs -r rpm -q --qf 'Requires: %%{name} = %%{epoch}:%%{version}\n' | sed -e 's/ (none):/ /' -e 's/ 0:/ /' | fgrep -v 'is not')
    %perl_archlib   %(eval '`perl -V:installarchlib`'; echo '$installarchlib')
    %perl_sitelib   %(eval '`perl -V:installsitelib`'; echo '$installsitelib')
    %perl_sitearch  %(eval '`perl -V:installsitearch`'; echo '$installsitearch')
    %perl_man1dir   %(eval '`perl -V:installman1dir`'; echo '$installman1dir')
    %perl_man3dir   %(eval '`perl -V:installman3dir`'; echo '$installman3dir')
    
    #------------------------------------------------------------------------------
    # arch macro for all Intel i?86 compatibile processors
    #  (Note: This macro (and it's analogues) will probably be obsoleted when
    #   rpm can use regular expressions against target platforms in macro
    #   conditionals.
    #
    %intel  i386 i486 i586 i686 i786 i886 i986
    %amd    k6 athlon
    %ix86   %intel %amd
    
    #------------------------------------------------------------------------
    # Use in %install to generate locale specific file lists. For example,
    #
    # %install
    # ...
    # %find_lang %{name}
    # ...
    # %files -f %{name}.lang
    #
    %find_lang      /usr/lib/rpm/find-lang
    
    # 
    

     #


     

    Index

    NAME


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру