The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

ct (4)
  • ct (1) ( Solaris man: Команды и прикладные программы пользовательского уровня )
  • >> ct (4) ( FreeBSD man: Специальные файлы /dev/* )

  • BSD mandoc
     

    NAME

    
    
    ct
    
     - WD33C93[ABC] based CBUS SCSI host adapter driver
    
     
    

    SYNOPSIS

    device ct device scbus

    In /boot/device.hints:

    For most PC-9801-55, -92 and compatibles: hint.ct.0.at=isa

    For ELECOM bus-master SCSI adapters: hint.ct.0.at=isa hint.ct.0.flags=0x30000

    For I-O DATA SC98 adapters: hint.ct.0.at=isa hint.ct.0.flags=0x10000

    For LOGITEC adapters: hint.ct.0.at=isa hint.ct.0.flags=0x50000

    For TEXA adapters: hint.ct.0.at=isa hint.ct.0.flags=0x20000

    For adapters with SMIT transfer mode to enable SMIT transfer: hint.ct.0.at=isa hint.ct.0.flags=0x40000 hint.ct.0.maddr=0xdc000

    Flags meaning:

    0x00000
    DMA transfer mode for an NEC PC-9801-55, -92 (or compatibles), ICM IF-2660, Midori-Denshi MDC-554NA, or Logitec LHA-N151
    0x10000
    DMA transfer mode for an I-O DATA SC-98II
    0x20000
    bus-master transfer mode for a TEXA HA-55BS2, its successors, or Midori-Denshi MDC-926R
    0x30000
    bus-master transfer mode for an ELECOM bus-master SCSI adapter
    0x40000
    SMIT transfer mode (for supported adapters only)
    0x50000
    bus-master transfer mode for a Logitec LHA-20x series, ICM IF-2766, IF-2766ET, IF-2767 or IF-2769

     

    DESCRIPTION

    The driver provides access to the SCSI bus connected to a WD33C93[ABC] based host adapter.  

    HARDWARE

    The driver supports the following adapters:

     

    SEE ALSO

    cd(4), ch(4), ctau(4), da(4), intro(4), sa(4), scsi(4)  

    NOTES

    Historically, the driver for the Cronyx Tau WAN adapters was ``ct'' This device name was changed to ``ctau'' to avoid conflicts with this pc98 driver. The network device name for ctau(4) is ``ct '' Please see ctau(4) for the details for that device.  

    HISTORY

    The device driver has been developed for Nx Ns /pc98 and ported for Fx . It first appeared in Fx 4.4 .  

    AUTHORS

    The driver was written by An Naofumi HONDA .

    This manual page was written by An -nosplit An Noriaki MITSUNAGA Aq [email protected] and An Hideyuki KURASHINA Aq [email protected] .


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    HARDWARE
    SEE ALSO
    NOTES
    HISTORY
    AUTHORS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру