The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

ctlinnd (8)
  • >> ctlinnd (8) ( Linux man: Команды системного администрирования )
  •  

    NAME

    ctlinnd - control the InterNetNews daemon
     
    

    SYNOPSIS

    ctlinnd [ -h ] [ -s ] [ -t timeout ] command [ argument... ]  

    DESCRIPTION

    Ctlinnd sends a message to the control channel of innd(8), the InterNetNews server.

    In the normal mode of behavior, the message is sent to the server, which then performs the requested action and sends back a reply with a text message and the exit code for ctlinnd. If the server successfully performed the command, ctlinnd will exit with a status of zero and print the reply on standard output. If the server could not perform the command (for example, it was told to remove a newsgroup that does not exist), it will direct ctlinnd to exit with a status of one. The ``shutdown,'' ``xabort,'' and ``xexec'' commands do not generate a reply; ctlinnd will always exit silently with a status of zero.  

    OPTIONS

    -s
    If the ``-s'' flag is used, then no message will be printed if the command was successful.
    -t
    The ``-t'' flag can be used to specify how long to wait for the reply from the server. The timeout value specifies the number of seconds to wait. A value of zero waits forever, and a value less than zero indicates that no reply is needed. When waiting for a reply, ctlinnd will try every two minutes to see if the server is still running, so it is unlikely that ``-t0'' will hang. The default is set as <CTLINND_TIMEOUT in include/config.h> (typically 0.)
    -h
    To see a command summary, use the ``-h'' flag. If a command is included when ctlinnd is invoked with the ``-h'' flag, then only the usage for that command will be given.

    If a large number of groups are going to be created or deleted at once, it may be more efficient to ``pause'' or ``throttle'' the server and edit the active(5) file directly.

    The complete list of commands follows. Note that all commands have a fixed number of arguments. If a parameter can be an empty string, then it is necessary to specify it as two adjacent quotes, like "".

    addhist <Message-ID> arr exp post paths
    Add an entry to the history database. This directs the server to create a history line for Message-ID. The angle brackets are optional. Arr, exp, and post specify when the article arrived, what its expiration date is, and when it was posted. All three values are a number indicating the number of seconds since the epoch. If the article does not have an Expires header, then exp should be zero. Paths is the pathname within the news spool directory where the article is filed. If the article is cross-posted, then the names should be separated by whitespace and the paths argument should be inside double quotes. If the server is throttled manually, this command causes it to briefly open the history database. And if the server is paused or throttled except that case, this command is rejected.
    allow reason
    Remote connections are allowed. The reason must be the same text given with an earlier ``reject'' command, or an empty string.
    begin site
    Begin feeding site. This will cause the server to rescan the newsfeeds(5) file to find the specified site and set up a newsfeed for it. If the site already exists, a ``drop'' is done first. This command is forwarded; see below.
    cancel <Message-ID>
    Remove the article with the specified Message-ID from the local system. This does not generate a cancel message. The angle brackets are optional. If the server is throttled manually, this command causes it to briefly open the history database. And if the server is paused or throttled except that case, this command is rejected.
    changegroup group rest
    The newsgroup group is changed so that its fourth field in the active file becomes the value specified by the rest parameter. This may be used to make an existing group moderated or unmoderated, for example.
    checkfile
    Check the syntax of the newsfeeds file, and display a message if any errors are found. The details of the errors are reported to syslog(3).
    drop site
    Flush and drop site from the server's list of active feeds. This command is forwarded; see below.
    feedinfo site
    Print detailed information about the state of the feed to site or more brief status of all feeds if site is an empty string.
    flush site
    Flush the buffer for the specified site. The actions taken depend on the type of feed the site receives; see newsfeeds(5). This is useful when the site is fed by a file and batching is going to start. If site is an empty string, then all sites are flushed and the active file and history databases are also written out. This command is forwarded; see below.
    flushlogs
    Close the log and error log files and rename them to have a .old extension. The history database and active file are also written out.
    go reason
    Re-open the history database and start accepting articles after a ``pause'' or ``throttle'' command. The reason must either be an empty string or match the text that was given in the earlier ``pause'' or ``throttle'' command. If a ``reject'' command was done, this will also do an ``allow'' command if the reason matches the text that was given in the ``reject.'' If a ``reserve'' command was done, this will also clear the reservation if the reason matches the text that was given in the ``reserve.'' Note that if only the history database has changed while the server is paused or throttled, it is not necessary to send it a ``reload'' command before sending it a ``go'' command. If the server throttled itself because it accumulated too many I/O errors, this command will reset the error count. If the server was not started with the ``-ny'' flag, then this command also does a ``readers'' command with ``yes'' as the flag and reason as the text.
    hangup channel
    Close the socket on the specified incoming channel. This is useful when an incoming connection appears to be hung.
    help [command]
    Print a command summary for all commands, or just command if specified.
    lowmark file
    Reset the lowmarks in the active file based on the contents of the given file. Each line in the file must be of the form:
        group low-value
    
    for example
        comp.lang.c++    243
    
    logmode
    Cause the server to log its current operating mode to syslog.
    mode
    Print the server's operating mode as a multi-line summary of the parameters and operating state.
    name nnn
    Print the name and relevant information of channel number nnn or of all channels if it is an empty string. Format is:

    f1:f2:f3:f4:f5
    

    And meaning of each field is:

    f1      name of this channel
    f2      channel number
    f3      channel type
    f4      idle time for this channel(nntp type)
            or process id(process type)
    f5      channel status(nntp type)
    

    F3 is one of followings:

    control         control channel which is used
                            for ctlinnd
    file                    file channel which is used for
                            file feed
    localconn               local channel which is used for
                            nnrpd or rnews
    nntp                    nntp channel which is used for
                            current remote connection
    proc                    process channel which is used
                            for process feed
    remconn         remote channel which will be
                            used for nntp
    

    Channel status shows if the channel is paused or not. Nothing is shown unless the channel is paused. Or ``paused'' is shown. ``Paused'' status happens, if the number of remote connection for that label in incoming.conf(5) is beyond ``max-connections'' within ``hold-time'' seconds since connected.

    newgroup group rest creator
    Create the specified newsgroup. The rest parameter should be the fourth field as described in active(5); if it is not an equal sign, only the first letter is used. The creator should be the name of the person creating the group. If the newsgroup already exists, this is equivalent to the ``changegroup'' command. This is the only command that has defaults. The creator can be omitted and will default to the newsmaster (as specified at configure time, ``usenet'' by default), and the rest parameter can be omitted and will default to ``y''. This command can be done while the server is only throttled manually or running; it will update its internal state when a ``go'' command is sent. This command updates the active.times (see active(5)) file. This command is forwarded; see below.
    param letter value
    Change the command-line parameters of the server. The combination of defaults make it possible to use the text of the Control header directly. Letter is the innd command-line option to set, and value is the new value. For example, ``i 5'' directs the server to allow only five incoming connections. To enable or disable the action of the ``-n'' flag, use the letter ``y'' or ``n'', respectively, for the value.
    pause reason
    Pause the server so that no incoming articles are accepted. No existing connections are closed, but the history database is closed. This command should be used for short-term locks, such as when replacing the history files. If the server was not started with the ``-ny'' flag, then this command also does a ``readers'' command with ``no'' as the flag and reason as the text.
    perl flag
    Enable or disable perl news filtering, if <--with-perl is specified at configure>. If flag starts with the letter ``y'' then filtering is enabled. If it starts with ``n'', then filtering is disabled.
    python flag
    Enable or disable Python news filtering, if <--with-python is specified at configure>. If flag starts with the letter ``y'' then filtering is enabled. If it starts with ``n'', then filtering is disabled.

    readers flag text
    Allow or disallow newsreaders. If flag starts with the letter ``n'' then newsreading is disallowed, by causing the server to pass the text as the value of the nnrpd(8) ``-r'' flag. If flag starts with the letter ``y'' and text is either an empty string, or the same string that was used when newsreading was disallowed, then newsreading will be allowed.
    reject reason
    Remote connections (those that would not be handed off to nnrpd) are rejected, with reason given as the explanation.
    reload what reason
    The server updates its in-memory copies of various configuration files. What identifies what should be reloaded. If it is an empty string or the word ``all'' then everything is reloaded; if it is the word ``history'' then the history database is closed and opened, if it is the word ``incoming.conf'' then the incoming.conf(5) file is reloaded; if it is the word ``active'' or ``newsfeeds'' then both the active and newsfeeds files are reloaded; if it is the word ``overview.fmt'' then the overview.fmt(5) file is reloaded. If <--with-perl is specified at configure> and it is the word ``filter.perl'' then the filter_innd.pl file is reloaded. If a Perl procedure named ``filter_before_reload'' exists, it will be called prior to rereading filter_innd.pl. If a Perl procedure named ``filter_after_reload'' exists, it will be called after filter_innd.pl. has been reloaded. Reloading the Perl filter does not enable filtering if it is disabled; use perl y to do this. The startup_innd.pl file cannot be reloaded. If <--with-python is specified at configure> and it is the word ``filter.python'' then the filter_innd.py file is reloaded. If a Python method named ``filter_before_reload'' exists, it will be called prior to rereading filter_innd.py. If a Python method named ``__init__'' exists, it will be called after filter_innd.py. has been reloaded. Reloading the Python filter does not enable filtering if it is disabled; use python y to do this. If <--with-tcl is specified at configure> and it is the word ``filter.tcl'' then the filter.tcl file is reloaded. If a TCL procedure named ``filter_before_reload'' exists, it will be called prior to rereading filter.tcl. If a TCL procedure named ``filter_after_reload'' exists, it will be called after filter.tcl has been reloaded. Reloading the Tcl filter does not enable filtering if it is disabled; use filter to do this. The startup.tcl file cannot be reloaded. The reason is reported to syslog. There is no way to reload the data inn.conf(5) file.
    renumber group
    Scan overview database for the specified newsgroup and update the low-water mark and hi-water mark in the active file. If group is an empty string then all newsgroups are scanned. Renumber never works, unless overview data is created. See the description of ``enableoverview'' in inn.conf(5) for overview creation.
    reserve reason
    The next ``pause'' or ``throttle'' command must use reason as its reason. This ``reservation'' is cleared by giving an empty string for the reason. This command is used by programs like expire(8) that want to avoid running into other instances of each other.
    rmgroup group
    Remove the specified newsgroup. This is done by editing the active file. The spool directory is not touched, and any articles in the group will be expired using the default expiration parameters. Unlike the ``newgroup'' command, this command does not update the active.times file. This command can be done while the server is only throttled manually or running. This command is forwarded; see below.
    send feed text...
    The specified text is sent as a control line to the exploder feed.
    shutdown reason
    The server is shut down, with the specified reason recorded in the log and sent to all open connections.

    It is a good idea to send a ``throttle'' command first.

    If <--with-python is specified at configure> and a Python method named ``filter_close'' exists, it will be called just before innd exits.

    signal sig site
    Signal sig is sent to the specified site, which must be a channel or exploder feed. Sig can be a numeric signal number or the word ``hup,'' ``int,'' or ``term''; case is not significant.
    tcl flag
    Enable or disable Tcl news filtering, if <--with-tcl is specified at configure>. If flag starts with the letter ``y'' then filtering is enabled. If it starts with ``n'', then filtering is disabled.

    throttle reason
    Input is throttled so that all existing connections are closed and new connections are rejected. The history database is closed. This should be used for long-term locks, such as when expire is being run. If the server was not started with the ``-ny'' flag, then this command also does a ``readers'' command with ``no'' as the flag and reason as the text.
    timer off|interval
    Performance monitoring is turned off if ``off'' or ``0'' is specified, otherwise, statistics will be reported every interval seconds to syslog. See inn.conf(5) for information on how to set the startup default.
    trace item flag
    Tracing is turned on or off for the specified item. Flag should start with the letter ``y'' or ``n'' to turn tracing on or off. If item starts is a number, then tracing is set for the specified innd channel, which must be for an incoming NNTP feed. If it starts with the letter ``i'' then general innd tracing is turned on or off. If it starts with the letter ``n'' then future nnrpd's will or will not have the ``-t'' flag enabled, as appropriate. ``n'' does not affect to nnrpd with ``-D'' (running as a daemon).
    xabort reason
    The server logs the specified reason and then invokes the abort(3) routine.
    xexec path
    The server gets ready to shut itself down, but instead of exiting it execs <PREFIX specified with --prefix at configure>/inndstart with all of its original arguments except for ``-r''. Path can be any of ``innd'', ``inndstart'' or an empty string. any other value is an error.

    In addition to being acted upon within the server, certain commands can be forwarded to the appropriate child process. If the site receiving the command is an exploder (such as buffchan(8)) or it is a funnel that feeds into an exploder, then the command can be forwarded. In this case, the server will send a command line to the exploder that consists of the ctlinnd command name. If the site funnels into an exploder that has an asterisk (``*'') in its ``W'' flag (see newsfeed(5)), then the site name will be appended to the command; otherwise no argument is appended.  

    BUGS

    Ctlinnd uses the inndcomm(3) library, and is therefore limited to server replies no larger than 4k.  

    HISTORY

    Written by Rich $alz <[email protected]> for InterNetNews. This is revision 1.16.2.3, dated 2001/03/11.  

    SEE ALSO

    active(5), expire(8), innd(8), inndcomm(3), inn.conf(5), newsfeeds(5), overview.fmt(5).


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    OPTIONS
    BUGS
    HISTORY
    SEE ALSO


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру