The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

dictd (8)
  • >> dictd (8) ( Linux man: Команды системного администрирования )
  •  

    NAME

    dictd - a dictionary database server
     
    

    SYNOPSIS

    dictd [options]
    
     

    DESCRIPTION

    dictd is a server for the Dictionary Server Protocol (DICT), a TCP transaction based query/response protocol that allows a client to access dictionary definitions from a set of natural language dictionary databases. Since startup time is significant, the server is designed to run continuously, and should not be run from inetd(8). Databases are distributed seperately from the server.  

    BACKGROUND

    For many years, the Internet community has relied on the "webster" protocol for access to natural language definitions. The webster protocol supports access to a single dictionary and (optionally) to a single thesaurus. In recent years, the number of publicly available webster servers on the Internet has dramatically decreased. Fortunately, several freely-distributable dictionaries and lexicons have recently become available on the Internet. However, these freely-distributable databases are not accessible via a uniform interface, and are not accessible from a single site. They are often small and incomplete individually, but would collectively provide an interesting and useful database of English words. Examples include the Jargon file, the WordNet database, MICRA's version of the 1913 Webster's Revised Unabridged Dictionary, and the Free Online Dictionary of Computing. (See the DICT protocol specification (RFC) for references.) Translating and non-English dictionaries are also becoming available (for example, the FOLDOC dictionary is being translated into Spanish). The webster protocol is not suitable for providing access to a large number of separate dictionary databases, and extensions to the current webster protocol were not felt to be a clean solution to the dictionary database problem. The DICT protocol is designed to provide access to multiple databases. Word definitions can be requested, the word index can be searched (using an easily extended set of algorithms), information about the server can be provided (e.g., which index search strategies are supported, or which databases are available), and information about a database can be provided (e.g., copyright, citation, or distribution information). Further, the DICT protocol has hooks that can be used to restrict access to some or all of the databases. dictd(8) is a server that implements the DICT protocol. Bret Martin implemented another server, and several people (including Bret and myself) have implemented clients in a variety of languages.  

    OPTIONS

    -V or --version
    Display version information.
    -L or --license
    Display copyright and license information.
    -h or --help
    Display help information.
    -v or --verbose or -dverbose
    Be verbose.
    -c file or --config file
    Specify configuration file. The default is /etc/dictd.conf, but may be changed in the dictd.h file at compile time (DICT_CONFIG_FILE).
    --port service
    Specifies the port (e.g., 2628) or service (e.g., dict) for connections. The default is 2628, as specified in the DICT Protocol RFC, but may be changed in the dictd.h file at compile time (DICT_DEFAULT_SERVICE).
    --depth length
    Specify the queue length for listen(2). Specifies the number of pending socket connections which are queued by the operating system. Some operating systems may silently limit this value to 5 (older BSD systems) or 128 (Linux). The default is 10 but may be changed in the dictd.h file at compile time (DICT_QUEUE_DEPTH).
    --delay seconds
    Specifies the number of seconds a client may be idle before the server will close the connection. Idle time is defined to be the time the server is waiting for input and does not include the time the server spends searching the database. Connections are closed without warning since no provision for premature connection termination is specified in the DICT protocol RFC. The default is 600 seconds (10 minutes), but may be changed in the dictd.h file at compile time (DICT_DEFAULT_DELAY).
    --limit children
    Specifies the number of daemons that may be running simultaneously. Each daemon services a single connection. If the limit is exceeded, a (serialized) connection will be made by the server process, and a response code 420 (server temporarily unavailable) will be sent to the client. This parameter should be adjusted to prevent the server machine from being overloaded by dict clients, but should not be set so low that many clients are denied useful connections. The default is 100, but may be changed in the dictd.h file at compile time (DICT_DAEMON_LIMIT).
    -l option or --log option
    Specify a logging option. Some of the more verbose options are used primarily for debugging the server code, and are not practical for normal use.
    server
    Log server diagnostics. This is extrememly verbose.
    connect
    Log all connections.
    stats
    Log all children terminations.
    commands
    Log all commands. This is extrememly verbose.
    client
    Log results of CLIENT command.
    found
    Log all words found in the databases.
    notfound
    Log all words not found in the databases.
    timestamp
    When logging to a file, use a full timestamp like that which syslog would produce. Otherwise, no timestamp is made, making the files shorter.
    host
    Log name of foreign host.
    min
    Set a minimal number of options. If logging is activated (to a file, or via syslog), and no options are set, then the minimal set of options will be used.
    all
    Set all of the options.
    none
    Clear all of the options. To facilitate location of interesting information in the log file, entries are marked with initial letters indicating the class of the line being logged:
    I
    Information about the server, connections, or termination statistics. These lines are generally not designed to be parsed automatically.
    E
    Error messages.
    C
    CLIENT command information.
    D
    Definitions found in the databases searched.
    M
    Matches found in the database searched. N Matches which were not found in the databases searched. T Trace of exact line sent by client. To preserve anonymity of the client, do not use the connect or host options. Clients may or may not send host information using the CLIENT command, but this should be an option that is selectable on the client side.
    -s
    Log using the syslog(3) facility.
    -L file
    Specify the file for logging.
    -d option
    Activate a debugging option. There are several, all of which are only useful to developers. They are documented here for completeness. A list can be obtained interactively by using -d with an illegal option.
    verbose
    The same as -v or --verbose. Adds verbosity to other options.
    scan
    Debug the scanner for the configuration file.
    parse
    Debug the parser for the configuration file.
    search
    Debug the character folding and binary search routines.
    init
    Report database initialization.
    port
    Log client-side port number to the log file.
    lev
    Debug Levenshtein search algorithm.
    auth
    Debug the authorization routines.
    nodetach
    Do not detach as a background process. Implies that a copy of the log file will appear on the standard outout.
    nofork
    Do not fork daemons to service requests. Be a single-threaded server. This option implies nodetach, and is most useful for using a debugger to find the point at which daemon processes are dumping core.
    alt
    Debugs altcompare in index.c.
     

    CONFIGURATION FILE

    The configuration file defaults to /etc/dictd.conf, but can be specified on the command line with the -c option (see above). The configuration file has four distinct sections. At this time, each section must appear in the specified order, although only the Database section is required.
    Syntax
    The following keywords are valid in a configuration file: access, allow, deny, group, database, data, index, filter, prefilter, postfilter, name, user, authonly, site. Keywords are case sensitive. String arguments that contain spaces should be surrounded by double quotes. Without quoting, strings may contain alphanumeric characters and _, -, ., and *, but not spaces. Strings must be on a single line and cannot be continued between lines. Comments start with # and extend to the end of the line.
    Access Specification
    Access specifications may occur in the Access Section or in the Database Section. The access specification will be described here.
    For allow, deny, and authonly, a star (*) may be used as a wild card that matches any number of characters. A question mark (?) may be used as a wildcard that matches a single character. For example, 10.0.0.* and *.edu are valid strings. The syntax is as follows:
    allow string
    The string specifies a domain name or IP address which is allows access the server (in the Access Section) or to a database (in the Database Section).
    deny string
    The string specifies a domain name or IP address which is denies access to the server (in the Access Section) or to a database (in the Database Section). Note that if reverse DNS is not working, then only the IP number will be checked. Therefore, it is essential to deny networks based on IP number, since a denial based on domain name may not always be checked.
    authonly string
    This form is only useful in the Access Section. The string specifies a domain name or IP address which is allowed access to the server but not to any of the databases. All commands are valid except DEFINE, MATCH, and SHOW DB. More specifically AUTH is a valid command, and commands which access the databases are not allowed.
    userstring
    This form is only useful in the Database Section. The string specifies a username that is allowed to access this database after a successful AUTH command is executed.
    site string
    Used to specify the filename for the site information file, a flat text file which will be displayed in response to the SHOW SERVER command. This section, if present, must be first.
    access { access specification }
    This section, the second if the Site Section is present, contiains access restrictions for the server and all of the databases collectively. Per-database control is specified in the Database Section
    database string { database specification }
    This section is required. The string specifies the name of the database (e.g., wn or web1913). The database specification describes the database:
    data string
    Specifies the filename for the flat text database.
    index string
    Specifies the filename for the index file.
    prefilter string
    Specifies the prefilter command. When a chunk of the compressed database is read, it will be filtered with this filter before being decompressed. This may be used to provide some additional compression that knows about the data and can provide better compression than the LZ77 algorithm used by zlib.
    postfilter string
    Specifies the postfilter command. When a chunk of the compressed database is read, it will be filtered with this filter before the offset and length for the entry are used to access data. This is provided for symmetry with the prefilter command, and may also be useful for providing additional database compression.
    filter string
    Specifies the filter command. After the entry is extracted from the database, it will be filtered with this filter. This may be used to provide formatting for the entry (e.g., for html). Warning: This is not currently implemented.
    name string
    Specifies the short name of the database (e.g., "1913 Webster's"). If the string begins with @, then it specifies the headword to look up in the dictionary to fine the short name of the database. The default is "@00-database-short", but this may be changed in the
    access { access specification }
    Used to restrict access to this particular database. dictd.h file at compile time (DICT_SHORT_ENTRY_NAME).
    user string string
    The first string specifies the username, and the second string specifies the shared secret for this username. When the AUTH command is used, the client will provide the username and a hashed version of the shared secret. If the shared secret matches, the user is said to have authenticated, and will have access to databases whose access specifications allow that user (by name, or by wildcard). If present, this section must appear last in the configuration file. There may be many user entries. The shared secret should be kept secret, as anyone who has access to it can access the shared databases (assuming access is not denied by domain name).
     

    DETERMINATION OF ACCESS LEVEL

    When a client connects, the global access specification is scanned, in order, until a specification matches. If no access specification exists, all access is allowed (e.g., the action is the same as if "allow *" was the only item in the specification). For each item, both the hostname and IP are checked. For example, consider the following access specification:
    allow 10.42.* authonly *.edu deny *
    With this specification, all clients in the 10.42 network will be allowed access to unrestricted databases; all clients from *.edu sites will be allowed to authenticate, but will be denied access to all databases, even those which are otherwise unrestricted; and all other clients will have their connection terminated immediately. The 10.42 network clients can send an AUTH command and gain access to restricted databases. The *.edu clients must send an AUTH command to gain access to any databases, restricted or unrestricted. When the AUTH command is sent, the access list for each database is scanned, in order, just as the global access list is scanned. However, after authentication, the client has an assocciated username. For example, consider the following access specification:
    user u1 deny *.com user u2 allow *
    If the client authenticated as u1, then the client will have access to this database, even if the client comes from a *.com site. In contrast, if the client authenticated as u2, the client will only have access if it does not come from a *.com site. In this case, the "user u2" is redundant, since that client would also match "allow *". Warning: Checks are performed for domain names and for IP addresses. However, if reverse DNS for a specific site is not working, it is possible that a domain name may not be available for checking. Make sure that all denials use IP addresses. (And consider a future enhancement: if a domain name is not available, should denials that depend on a domain name match anything? This is the more conservative viewpoint, but it is not currently implemented.)  

    SEARCH ALGORITHMS

    The DICT standard specifies a few search algorithms that must be implemented, and permits others to be supported on a server-dependent basis. The following search strategies are supported by this server. Note that all strategies are case insensitive. Most ignore non-alphanumeric, non-whitespace characters.
    exact
    An exact match. This algorithm uses a binary search and is one of the fastest search algorithms available.
    prefix
    Prefix match. This algorithm also uses a binary search and is very fast.
    substring
    Match a substring anywhere in the headword. This search strategy uses a modified Boyer-Moore-Horspool algorithm. Since it must search the whole index file, it is not as fast as the exact and prefix matches.
    suffix
    Suffix match. This search strategy also uses a modified Boyer-Moore-Horspool algorithm, and is as fast as the substring search.
    re
    POSIX 1003.2 (modern) regular expression search. Modern regular expressions are the ones used by egrep(1). These regular expressions allow predefined character classes (e.g., [[:alnum:]], [[:alpha:]], [[:digit:]], and [[:xdigit:]] are useful for this application); uses * to match a sequence 0 or more matches of the previous atom; uses + to match a sequence of 1 or more matches of the previous atom; uses ? to match a sequence of 0 or 1 matches of the prevous atom; used ^ to match the beginning of a word, uses $ to match the end of a word, and allows nested subexpression and alternation with () and |. For example, "(foo|bar)" matches all words that contain either "foo" or "bar". To match these special characters, they must be quoted with two backslashes (due to the quoting characteristics of the server). Warning: Regular expression matches can take 10 to 300 times longer than substring matches. On a busy server, with many databases, this can required more than 5 minutes of waiting time, depending on the complexity of the regular expression.
    regexp
    Old (basic) regular expressions. These regular expressions don't support |, +, or ?. Groups use escaped parentheses. While modern regular expressions are generally easier to use, basic regular expressions have a back reference feature. This can be used to match a second occurrence of something that was already matched. For example, the following expression finds all words that begin and end with the same three letters:
        ^\\(...\\).*\\1$
    
    Note the use of the double backslashes to escape the special characters. This is required by the DICT protocol string specification (a single backslash quotes the next character -- we use two to get a single backslash through to the regular expression engine). Warning: Note that the use of backtracking is even slower than the use of general regular expressions.
    soundex
    The Soundex algorithm, a classic algorithm for finding words that sound similar to each other. The algorithm encodes each word using the first letter of the word and up to three digits. Since the first letter is known, this search is relatively fast, and it sometimes good for correcting spelling errors when the Levenshtein algorithm doesn't help.
    lev
    The Levenshtein algorithm (string edit distance of one). This algorithm searches for all words which are within an edit distance of one from the target word. An "edit" means an insertion, deletion, or transposition. This is a rapid algorithm for correcting spelling errors, since many spelling errors are within a Levenshtein distance of one from the oroginal word.
     

    DATABASE FORMAT

    Databases for dictd are distributed separately. A database consists of two files. One is a flat text file, the other in the index. The flat text file contains dictionary entries (or any other suitable data), and the index contains tab-delimited tuples consisting of the headword, the byte offset at which this entry begins in the flat text file, and the length of the entry in bytes. The offset and length are encoded using base 64 encoding using the 64-character subset of International Alphabet IA5 discussed in RFC 1421 (printeable encoding) and RFC 1522 (base64 MIME). Encoding the offsets in base 64 saves considerable space when compared with the usual base 10 encoding, while still permitting tab characters (ASCII 9) to be used for delimiting fields in a record. Each record ends with a newline (ASCII 10), so the index file is human readable. The flat text file may be compressed using gzip(1) (not recommended) or dictzip(1) (highly recommended). Optimal speed will be obtained using an uncompressed file. However, the gzip compression algorithm works very well on plain text, and can result in space savings typically between 60 and 80%. Using a file compressed with gzip(1) is not recommended, however, because random access on the file can only be accomplished by serially decompressing the whole file, a process which is prohibitively slow. dictzip(1) uses the same compression algorithm and file format as does gzip(1), but provides a table that can be used to randomly access compressed blocks in the file. The use of 50-64kB blocks for compression typically degrades compression by less than 10%, while maintaining acceptable random access capabilities for all data in the file. As an added benefit, files compressed with dictzip(1) can be decompressed with gzip(1) or zcat(1). (Note: recompressing a dictzip'd file using, for example, znew(1) will destroy the random access characteristics of the file. Always compress data files using dictzip(1).)  

    ACKNOWLEDGEMENTS

    Special thanks to Jean-loup Gailly and Mark Adler for writing the zlib general purpose data compression library. The version contained with dictd is not necessarily an original version and may have been modified, although any modifications are probably trivial. The key features of the dictzip random-access compression algorithm utilize a documented extension of the gzip format, and do not require any modifications to zlib. For more information on zlib, please see the zlib home page at http://quest.jpl.nasa.gov/zlib/. Special thanks to Henry Spencer for his regex package. The package contained with dictd is not necessarily an original version and may have been modified. For more information on regex, please see ftp://zoo.toronto.edu/pub/regex.shar.  

    COPYING

    The main source files for the dictd server and the dictzip compression program were written by Rik Faith ([email protected]) and are distributed under the terms of the GNU General Public License. If you need to distribute under other terms, write to the author. The main libraries used by these programs (zlib, regex, libmaa) are distributed under different terms, so you may be able to use the libraries for applications which are incompatible with the GPL -- please see the copyright notices and license information that come with the libraries for more information, and consult with your attorney to resolve these issues.  

    BUGS

    The regular expression searches do not ignore non-whitespace, non-alphanumeric characters as do the other searches. In practice, this isn't much of a problem. The databases are memory mapped and cannot be updated while the server is running. There is no way to get a running server to re-read the configuration file, so databases cannot be added or deleted on the fly.  

    FILES

    /etc/dictd.conf
    /usr/lib/dictd  

    SEE ALSO

    dict(1), dictzip(1), gunzip(1), zcat(1), webster(1), RFC 2229


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    BACKGROUND
    OPTIONS
    CONFIGURATION FILE
    DETERMINATION OF ACCESS LEVEL
    SEARCH ALGORITHMS
    DATABASE FORMAT
    ACKNOWLEDGEMENTS
    COPYING
    BUGS
    FILES
    SEE ALSO


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру