The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

ieee1284_read_status (3)
  • >> ieee1284_read_status (3) ( Linux man: Библиотечные вызовы )
  •  

    NAME

    ieee1284_read_status, ieee1284_wait_status - analyse status lines
     
    

    SYNOPSIS

    #include <ieee1284.h>

    int ieee1284_read_status (struct parport *port);
    int ieee1284_wait_status (struct parport *port, unsigned char mask, unsigned char val, struct timeval *timeout);

     

    DESCRIPTION

    There are five status lines, one of which is usually inverted on PC-style ports. Where they differ, libieee1284 operates on the IEEE 1284 values, not the PC-style inverted values. The status lines are represented by the following enumeration:

    enum ieee1284_status_bits
    {
      S1284_NFAULT = 0x08,
      S1284_SELECT = 0x10,
      S1284_PERROR = 0x20,
      S1284_NACK   = 0x40,
      S1284_BUSY   = 0x80,
      /* To convert those values into PC-style register values, use this: */
      S1284_INVERTED = S1284_BUSY,
    };
    

    These functions all act on the parallel port associated with port, which must be claimed.

    The purpose of ieee1284_wait_status is to wait until particular status lines have specified values. Its timeout parameter may be modified on return.

     

    RETURN VALUE

    For ieee1284_read_status, the return value is a non-negative integer with bits set as appropriate representing the status lines. A negative result indicates an error.

    For ieee1284_wait_status, the return value is E1284_OK if the status lines now reflect the desired values (i.e. status & mask is val), or a negative result indicating an error.

    Possible error codes:

    E1284_NOTIMPL
    The port lacks the required capability. This could be due to a limitation of this version of libieee1284, or a hardware limitation.

    E1284_NOTAVAIL
    Access to the status lines is not available on this port type.

    E1284_TIMEDOUT
    The timeout has elapsed.

    E1284_INVALIDPORT
    The port parameter is invalid (for instance, perhaps the port is not claimed).

     

    NOTES

    The nAck pin is often able to trigger interrupts on the host machine. With operating system help these interrupts may be visible to the application via the file descriptor returned by ieee1284_get_irq_fd.

    Under Linux, the conditions are that the parallel port driver knows which interrupt line to use and is using it, and that the relevant /dev/parport device node is accessible and backed by a device driver.

     

    AUTHOR

    Tim Waugh <[email protected]>.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    RETURN VALUE
    NOTES
    AUTHOR


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру