The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

innd (8)
  • >> innd (8) ( Linux man: Команды системного администрирования )
  •  

    NAME

    innd, inndstart - InterNetNews daemon
     
    

    SYNOPSIS

    innd [ -a ] [ -c days ] [ -C ] [ -d ] [ -f ] [ -H count ] [ -i count ] [ -IIP_address ] [ -l size ] [ -m mode ] [ -n flag ] [ -o count ] [ -pfd_desc ] [ -Pport ] [ -r ] [ -s ] [ -t timeout ] [ -T count ] [ -u ] [ -X seconds ]

    inndstart [ flags ]  

    DESCRIPTION

    Innd, the InterNetNews daemon, handles all incoming NNTP feeds. It reads the active(5), newsfeeds(5), and incoming.conf(5) files into memory. It then opens the NNTP port to receive articles from remote sites (see the ``-p'' option), If <HAVE_UNIX_DOMAIN_SOCKETS in include/config.h> is defined, a Unix-domain stream socket to receive articles from local processes such as nnrpd(8) and rnews(1), and a Unix-domain datagram socket for use by ctlinnd(8). If <HAVE_UNIX_DOMAIN_SOCKETS in include/config.h> is not defined, named pipes are used instead. Ctlinnd(8) is used to direct the server to perform certain actions. It also opens the history(5) database and two log files to replace its standard output and standard error.

    Once the files and sockets have been opened, innd waits for connections and data to be ready on its ports by using select(2) and non-blocking I/O. If no data is available, then it will flush its in-core data structures. The default number of seconds to timeout before flushing is set as <DEFAULT_TIMEOUT in include/config.h> (typically 300) seconds.

    If innd gets an ENOSPC error (see intro(2)) while trying to write the active file, an article file, or the history database, it will send itself a ``throttle'' command. This will also happen if it gets too many I/O errors while writing to any files.

    Some parameters in inn.conf(5) can also be set innd's option. In this case, parameters in inn.conf(5) are overridden by those options.  

    OPTIONS

    -a
    By default, if a host if not mentioned in the incoming.conf file, then the connection is handed off to nnrpd. If the ``-a'' flag is used, then any host can connect and transfer articles.
    -c
    innd rejects articles that are too old. While this behavior can be controlled by the history database, occasionally a site dumps a batch of very old news back onto the network. Use the ``-c'' flag to specify a cutoff. For example ``-c21'' will reject any articles that were posted more than 21 days ago. A value of zero will suppress this check. The default is 14 days, but can be changed with the ``artcutoff'' option in inn.conf(5)
    -C
    If the ``-C'' flag is used, then innd will accept and propagate but not actually process cancel or supersedes messages. This is intended for sites concerned about abuse of cancels and wish to use another cancel mechanism with greater authentication.
    -d -f
    Innd normally puts itself into the background, sets its standard output and error to log files, and disassociates itself from the terminal. Using the ``-d'' flag instructs the server to not do this, while using the ``-f'' flag just leaves the server running the foreground.
    -H -T -X
    The ``-H'', ``-T'', and ``-X'' flags control the number of connects per minute allowed. This code is meant to protect your server from newsreader clients that make too many connects per minute to your server. You should probably not use it unless you are having a problem. The table used for these checks is fixed at 128 entries and is used as a ring. The size was chosen to make calculating the index easy and to be pretty sure you won't run out of space. In practice, it is doubtful that you will use even half the table at any given moment.
    The ``-H'' flag limits the number of times a host is allowed to connect to the server per ``-X'' seconds. The default is 2.
    The ``-T'' flag limits the total number of incoming connects to innd per ``-X'' seconds. The maximum value is 128. The default is 60.
    The ``-X'' sets the number of seconds used by the ``-H'' and ``-T'' flags. A value of zero turns off checking. The default is 0.
    -i
    To limit the number of incoming NNTP connections, use the ``-i'' flag. A value of zero will suppress this check. The default is 50, if the ``maxconnections'' option in inn.conf(5) is not specified. The ``maxconnections'' option in inn.conf(5) is changed with this value.
    -I
    This option allows you to bind innd to a specific interface IP address. The IP address must be in dotted quad (nnn.nnn.nnn.nnn) format. See also the ``bindaddress'' option in inn.conf(5).
    -l
    To limit the size of an article, use the ``-l'' flag. If this flag is used, then any article bigger than size bytes will be rejected. The default is 1000000L bytes. Checking can be disabled by using a value of zero. See also the ``maxartsize'' and ``localmaxartsize'' option in inn.conf(5).
    -m
    To start the server in a paused or throttled state (see ctlinnd(8)) use the ``-m'' flag to set the initial running mode. The argument should start with a single letter g, p, or t, to emulate the ``go,'' ``pause,'' or ``throttle'' commands, respectively.
    -n
    The ``-n'' flag specifies whether or not pausing or throttling the server should also disable future newsreading processes. A value of ``y'' will make newreaders act as the server, a value of ``n'' will allow newsreading even when the server is not running. The default is to allow reading, but can also be changed with the ``readerswhenstopped'' option in inn.conf(5).
    -o
    To limit the number of files that will be kept open for outgoing file feeds, use the ``-o'' flag. The default is the number of available descriptors minus some reserved for internal use.
    -p
    If the ``-p'' flag is used, then the NNTP port is assumed to be open on the specified descriptor. (If this flag is used, then innd assumes it is running with the proper permissions and it will not call chown(2) on any files or directories it creates.)
    -P
    If the ``-P'' flag is used, then the port specified is used for listening for connections. innd will need to have been executed with enough permissions to open the specified port.
    -r
    If the ``-r'' flag is used, the server will renumber the active file as if a ``renumber'' command were sent.
    -s
    If the ``-s'' flag is used, then innd will not do any work but will instead just check the syntax of the newsfeeds file. It will exit with an error status if there are any errors; the actual errors will be reported in syslog(3).
    -t
    Change the timeout period before flushing to timeout seconds.
    -u
    The logs are normally buffered; use the ``-u'' flag to have them unbuffered.

    Inndstart is a small front-end program that opens the NNTP port, sets its userid and groupid to the news maintainer, and then execs innd with the ``-p'' flag and a minimal secure, environment. This is a small, easily-understood front-end program that can be used if a site does not want to run innd with root privileges.  

    CONTROL MESSAGES

    Arriving articles that have a Control header are called control messages. Except for the cancel message, these messages are implemented by external programs in the <pathcontrol in inn.conf> directory, if <usecontrolchan in inn.conf> is ``false''. (Cancel messages update the history database, so they must be handled internally; the cost of syncing, locking, then unlocking would be too high given the number of cancel messages that are received.)

    When a control message arrives, the first word of the text is converted to lowercase except for ``cancel'' and used as the name of the program to execute; if the named program does not exist, then a program named <pathcontrol in inn.conf>/default is executed.

    All control programs are invoked with four parameters. The first is the address of the person who posted the message; this is taken from the Sender header. If that header is empty, then it is taken from the From header. The second parameter is the address to send replies to; this is taken from the Reply-To header. If that header is empty then the poster's address is used. The third parameter will be a name under which the article is filed, relative to the news spool directory. The fourth parameter is the host that sent the article, as specified on the Path line.

    If <usecontrolchan in inn.conf> is ``true'', all control messages except for the cancel will never processed by external program fork'ed by innd. Instead they can be processed by controlchan script which is invoked as channel program by innd, and you need to setup newsfeeds(5) to use this script. Processing by controlchan can reduce excessive load if many control messages arrive in a short time.

    The distribution of control message is also different from those of standard articles.

    Control messages are normally filed in the newsgroup named control. They can be filed in subgroups, however, based on the control message command. For example, a newgroup message will be filed in control.newgroup if that group exists, otherwise it will be filed in control.

    Sites may explicitly have the ``control'' newsgroup in their subscription list, although it is usually best to exclude it. If a control message is posted to a group whose name ends with the four characters ``.ctl'' then the suffix is stripped off and what is left is used as the group name. For example, a cancel message posted to ``news.admin.ctl'' will be sent to all sites that subscribe to ``control'' or ``news.admin.'' Newgroup and rmgroup messages receive additional special treatment. If the message is approved and posted to the name of the group being created or removed, then the message will be sent to all sites whose subscription patterns would cause them to receive articles posted in that group.

    If <mergetogroups in inn.conf> is ``true'', if an article is posted to a newsgroup that starts with the three letters ``to.'' it will get special treatment if the newsgroup does not exist in the active file: the article is filed into the newsgroup ``to'' and it is sent to the first site named after the prefix. For example, a posting to ``to.uunet'' will be filed in ``to'' and sent to the site ``uunet.''  

    PROTOCOL DIFFERENCES

    Innd implements the NNTP commands defined in RFC 977, with the following differences:
    1.
    The ``list'' may be followed by an optional ``active'', ``active.times'', ``newsgroups'' or ``subscription'' argument. This common extension is not fully supported; see nnrpd(8).
    2.
    The ``authinfo user'' and ``authinfo pass'' commands are implemented. These are based on the reference Unix implementation; see draft-barber-nntp-imp-07.txt for more detail.
    3.
    A new command, ``mode reader'', is provided. This command will cause the server to pass the connection on to nnrpd. The command ``mode query'' is intended for future use, and is currently treated the same way.
    4.
    The commands to support streaming transfer ``check messageid'' and ``takethis messageid'' are provided.
    5.
    A batch transfer command ``xbatch byte-count'' is also provided. This command will read byte-count bytes and store them for later processing by rnews(1) (which must be started separately). See the programs innxbatch and sendxbatches.sh.
    6.
    The only other commands implemented are ``head'' , ``help'' , ``ihave'' , ``quit'' , and ``stat''.
     

    HEADER MODIFICATIONS

    Innd modifies as few article headers as possible, although it could be better in this area.

    The following headers, if present, are removed:

    Date-Received
    Posted
    Posting-Version
    Received
    Relay-Version
    
    Empty headers and headers that consist of nothing but whitespace are also dropped.

    The local site's name (as determined by the ``pathhost'' value in inn.conf(5)) and an exclamation point are prepended to the Path header, if the first site's name in the header is different from local one.

    The Xref header is removed and a new one created.

    The Lines header will be added if it is missing.

    Innd does not rewrite incorrect headers. For example, it will not replace an incorrect Lines header, but will reject the article.  

    LOGGING

    Innd reports all incoming articles in its log file. This is a text file with a variable number of space-separated fields in one of the following formats:
    mon dd hh:mm:ss.mmm + feed <Message-ID> site...
    mon dd hh:mm:ss.mmm j feed <Message-ID> site...
    mon dd hh:mm:ss.mmm c feed <Message-ID> site...
    mon dd hh:mm:ss.mmm - feed <Message-ID> reason...
    mon dd hh:mm:ss.mmm ? feed <Message-ID> reason...
    

    There can also be a hostname and size field after the Message-ID depending on the ``nntplinklog'' and ``logsize'' options in inn.conf(5)

    The first three fields are the date and time to millisecond resolution. The fifth field is the site that sent the article (based on the Path header) and the sixth field is the article's Message-ID; they will be a question mark if the information is not available.

    The fourth field indicates whether the article was accepted or not. If it is a plus sign, then the article was accepted. If it is the letter ``j'' then the article was accepted, but all of newsgroups have an ``j'' in their active field, so the article was filed into the ``junk'' newsgroup. If the fourth field is the letter ``c'', then a cancel message was accepted before the original article arrived. In all three cases, the article has been accepted and the ``site...'' field contains the space-separated list of sites to which the article is being sent.

    If the fourth field is a minus sign, then the article was rejected. The reasons for rejection include:

    "%s" header too long
    "%s" wants to cancel <%s> by "%s"
    Article exceeds local limit of %s bytes
    Article posted in the future -- "%s"
    Bad "%s" header
    Can't write history
    Duplicate
    Duplicate "%s" header
    EOF in headers
    Linecount %s != %s +- %s
    Missing %s header
    No body
    No colon-space in "%s" header
    No space
    Space before colon in "%s" header
    Too old -- "%s"
    Unapproved for "%s"
    Unwanted newsgroup "%s"
    Unwanted distribution "%s"
    Whitespace in "Newsgroups" header -- "%s"
    
    Where ``%s'', above, is replaced by more specific information.

    If the fourth field is the letter ``?'', then the article includes strange strings which is CR without LF or LF without CR. Those characters are used together as ``CRLF'' to indicate end of line. Currently this log entry just indicates the weirdness of article, and innd never rejects it for this reason.

    Note that if an article is accepted, and <wanttrash in inn.conf> is set to ``yes'' and none of the newsgroups are valid, it will be logged with two lines, a ``j'' line and a minus sign line.

    Innd also makes extensive reports through syslog. The first word of the log message will be the name of the site if the entry is site-specific (such as a ``connected'' message). The first word will be ``SERVER'' if the message relates to the server itself, such as when a read error occurs.

    If the second word is the four letters ``cant'' then an error is being reported. In this case, the next two words generally name the system call or library routine that failed, and the object upon which the action was being performed. The rest of the line may contain other information.

    In other cases, the second word attempts to summarize what change has been made, while the rest of the line gives more specific information. The word ``internal'' generally indicates an internal logic error.  

    SIGNALS

    Innd will catch SIGTERM and SIGDANGER and then it will shutdown. If ``-d'' flag is used, SIGINT also will be catched and innd will shutdown.

    Innd will catch SIGUSR1 signal and recreate the control channel which is typically used for ctlinnd(8).  

    HISTORY

    Written by Rich $alz <[email protected]> for InterNetNews. This is revision 1.24.2.4, dated 2000/08/20.  

    SEE ALSO

    active(5), ctlinnd(8), dbz(3), history(5), incoming.conf(5), inn.conf(5), newsfeeds(5), nnrpd(8), rnews(1), syslog(8).


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    OPTIONS
    CONTROL MESSAGES
    PROTOCOL DIFFERENCES
    HEADER MODIFICATIONS
    LOGGING
    SIGNALS
    HISTORY
    SEE ALSO


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру