The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

ipw (4)
  • >> ipw (4) ( FreeBSD man: Специальные файлы /dev/* )
  • ipw (7) ( Solaris man: Макропакеты и соглашения )

  • BSD mandoc
     

    NAME

    ipw
    
     - Intel PRO/Wireless 2100 IEEE 802.11 driver
    
     
    

    SYNOPSIS

    To compile this driver into the kernel, place the following lines in your kernel configuration file:
    device ipw device pci device wlan device firmware

    Alternatively, to load the driver as a module at boot time, place the following lines in loader.conf5:

    if_ipw_load="YES"
    wlan_load="YES"
    firmware_load="YES"
    

    In both cases, place the following lines in loader.conf5 to load the firmware modules:

    ipw_bss_load="YES"
    ipw_ibss_load="YES"
    ipw_monitor_load="YES"
    
     

    DESCRIPTION

    The driver provides support for the Intel PRO/Wireless 2100 MiniPCI network adapter.

    By default, the driver configures the adapter for BSS operation (aka infrastructure mode). This mode requires the use of an access point.

    For more information on configuring this device, see ifconfig(8).

    This driver requires firmware to be loaded before it will work. For the loaded firmware to work the license at /usr/share/doc/legal/intel_ipw/LICENSE must be agreed to and the following line be added to loader.conf5:

    "legal.intel_ipw.license_ack=1"
     

    FILES

    /usr/share/doc/legal/intel_ipw/LICENSE
    firmware license

     

    EXAMPLES

    Join an existing BSS network (i.e., connect to an access point):

    "ifconfig ipw0 inet 192.168.0.20 netmask 0xffffff00"

    Join a specific BSS network with network name ``my_net ''

    "ifconfig ipw0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net"

    Join a specific BSS network with 40-bit WEP encryption:

    ifconfig ipw0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net \
        wepmode on wepkey 0x1234567890 weptxkey 1
    

    Join a specific BSS network with 104-bit WEP encryption:

    ifconfig ipw0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net \
        wepmode on wepkey 0x01020304050607080910111213 weptxkey 1
    
     

    DIAGNOSTICS

    "ipw%d: device timeout"
    The driver will reset the hardware. This should not happen.
    "ipw%d: firmware error"
    The onboard microcontroller crashes for some reason. The driver will reset the hardware. This should not happen.
    "ipw%d: timeout waiting for firmware initialization to complete"
    The onboard microcontroller failed to initialize in time. This should not happen.
    "ipw%d: could not load firmware image '%s'"
    The driver failed to load the firmware image using the firmware(9) subsystem. Verify that the necessary firmware modules are loaded and the license agreement loader(8) tunable has been set.
    "ipw%d: could not load microcode"
    An attempt to upload the microcode image to the onboard microcontroller failed. This should not happen.
    "ipw%d: could not load firmware"
    An attempt to upload the firmware image to the onboard microcontroller failed. This should not happen.

     

    SEE ALSO

    altq(4), iwi(4), pci(4), wlan(4), ifconfig(8)  

    AUTHORS

    The driver was written by An Damien Bergamini Aq [email protected] .


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    FILES
    EXAMPLES
    DIAGNOSTICS
    SEE ALSO
    AUTHORS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру