The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

kbdcontrol (1)
  • >> kbdcontrol (1) ( FreeBSD man: Команды и прикладные программы пользовательского уровня )

  • BSD mandoc
     

    NAME

    
    
    kbdcontrol
    
     - keyboard control and configuration utility
    
     
    

    SYNOPSIS

    [-dFKix ] [-A name ] [-a name ] [-b duration . pitch | belltype ] [-r delay . repeat | speed ] [-l keymap_file ] [-f # string ] [-k keyboard_device ] [-L keymap_file ]  

    DESCRIPTION

    The command is used to set various keyboard related options for the syscons(4) console driver and the keyboard drivers, such as key map, keyboard repeat and delay rates, bell characteristics etc.

    Keyboard options may be automatically configured at system boot time by setting variables in /etc/rc.conf See Sx Boot Time Configuration below.

    The following command line options are supported:

    -A name
    Detach the keyboard, specified by the keyboard device name, from the keyboard multiplexer. When using this option, the standard input of the process should be redirected from the keyboard multiplexer keyboard device (if the keyboard multiplexer is not the active keyboard) or /dev/console (if the keyboard multiplexer is the active keyboard and you are not working on the system console).
    -a name
    Attach the keyboard, specified by the keyboard device name, to the keyboard multiplexer. When using this option, the standard input of the process should be redirected from the keyboard multiplexer keyboard device (if the keyboard multiplexer is not the active keyboard) or /dev/console (if the keyboard multiplexer is the active keyboard and you are not working on the system console).
    -b duration . pitch | belltype
    Set the bell duration in milliseconds and pitch in hertz. If a belltype argument is specified, it may be one of normal which sets sound parameters back to normal values, off which disables the bell entirely, or visual which sets the bell to visual mode, i.e., flashes the screen instead. If belltype is preceded by the word quiet. the bell will not be rung when the ringing process is in the background vty. The visual bell, when chosen, applies to all vtys; other bell types can be set individually for each vty.
    -r delay . repeat | speed
    Set keyboard delay (250, 500, 750, 1000) and repeat (34, 38, 42, 46, 50, 55, 59, 63, 68, 76, 84, 92, 100, 110, 118, 126, 136, 152, 168, 184, 200, 220, 236, 252, 272, 304, 336, 368, 400, 440, 472, 504) rates, or if a speed argument is specified, it may be one of slow (1000.504), fast (250.34) or normal (500.126).
    -l keymap_file
    Install keyboard map file from keymap_file You may load the keyboard map file from a menu-driven command, kbdmap(1).
    -d
    Dump the current keyboard map onto stdout. The output may be redirected to a file and can be loaded back to the kernel later by the -l option above.
    -f # string
    Set function key number # to send string Refer to the man page for the keyboard driver (e.g. atkbd(4)) for available function keys and their numbers.
    -F
    Set function keys back to the standard definitions.
    -x
    Use hexadecimal numbers in keyboard map dump.
    -i
    Print brief information about the keyboard.
    -K
    Disconnect the keyboard from the console. You need to use the -k option below to associate a keyboard with the console again.
    -k keyboard_device
    Use the specified device as the console keyboard. When using this option, the standard input of the process should be redirected from /dev/console if you are not working on the system console (see the Sx EXAMPLES section).
    -L keymap_file
    Load keyboard map file from keymap_file and write the struct keymap compiled from it to stdout. This option is primarily intended for programmers and is probably of little use under normal circumstances.

     

    ENVIRONMENT

    The environment variable KEYMAP_PATH can hold an alternative path to the keyboard map files.  

    KEYBOARD CONFIGURATION

     

    Boot Time Configuration

    You may set variables in /etc/rc.conf or /etc/rc.conf.local in order to configure the keyboard at boot time. The following is the list of relevant variables.

    keymap
    Specifies a keyboard map file for the -l option.
    keyrate
    Sets the keyboard repeat rate for the -r option.
    keychange
    Lists function key strings for the -f option.

    See rc.conf5 for details.  

    Driver Configuration

    The keyboard device driver may let you change default configuration options, such as the default keyboard map, so that you do not need to set up the options at boot time. See keyboard driver manuals (e.g. atkbd(4), ukbd(4)) for details.  

    FILES

    /usr/share/syscons/keymaps/*
    keyboard map files

     

    EXAMPLES

    The following command will load the keyboard map file /usr/share/syscons/keymaps/ru.koi8-r.kbd

    kbdcontrol -l /usr/share/syscons/keymaps/ru.koi8-r.kbd

    So long as the keyboard map file resides in /usr/share/syscons/keymaps you may abbreviate the file name as ru.koi8-r

    kbdcontrol -l ru.koi8-r

    The following command will make the function key 10 emit "telnet myhost".

    kbdcontrol -f 10 "telnet myhost"

    In order to get the visual effect for bell, but prevent the screen from flushing if the bell is to ring in the background screen, run the following command.

    kbdcontrol -b quiet.visual

    To change the default console keyboard to the another keyboard, for example the first USB keyboard (see ukbd(4)), use the following commands.

    kbdcontrol -k /dev/ukbd0 < /dev/console

    To switch back to the default keyboard, use this command.

    kbdcontrol -k /dev/kbd0

    To allow using both the second USB keyboard and the first AT keyboard at the same time on console via the kbdmux(4) driver, use the following sequence of commands.

    kbdcontrol -K < /dev/console
    kbdcontrol -a atkbd0 < /dev/kbdmux0
    kbdcontrol -a ukbd1 < /dev/kbdmux0
    kbdcontrol -k /dev/kbdmux0 < /dev/console
    
     

    SEE ALSO

    kbdmap(1), vidcontrol(1), atkbd(4), kbdmux(4), keyboard(4), screen(4), syscons(4), ukbd(4), kbdmap(5), rc.conf5  

    AUTHORS

    An S/oren Schmidt Aq [email protected]  

    BUGS

    Report when found.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    ENVIRONMENT
    KEYBOARD CONFIGURATION
    Boot Time Configuration
    Driver Configuration
    FILES
    EXAMPLES
    SEE ALSO
    AUTHORS
    BUGS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру