The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

krb5_log (3)
  • >> krb5_log (3) ( FreeBSD man: Библиотечные вызовы )

  • BSD mandoc
    HEIMDAL  

    NAME

    krb5_initlog
    
     
    krb5_openlog
    
     
    krb5_closelog
    
     
    krb5_addlog_dest
    
     
    krb5_addlog_func
    
     
    krb5_log
    
     
    krb5_vlog
    
     
    krb5_log_msg
    
     
    krb5_vlog_msg
    
     - Heimdal logging functions
    
     
    

    LIBRARY

    Kerberos 5 Library (libkrb5, -lkrb5)
     
    

    SYNOPSIS

       #include <krb5.h>
    typedef void Fn *krb5_log_log_func_t const char *time const char *message void *data typedef void Fn *krb5_log_close_func_t void *data krb5_error_code krb5_addlog_dest (krb5_context context krb5_log_facility *facility const char *destination);
    krb5_error_code krb5_addlog_func (krb5_context context krb5_log_facility *facility int min int max krb5_log_log_func_t log krb5_log_close_func_t close void *data);
    krb5_error_code krb5_closelog (krb5_context context krb5_log_facility *facility);
    krb5_error_code krb5_initlog (krb5_context context const char *program krb5_log_facility **facility);
    krb5_error_code krb5_log (krb5_context context krb5_log_facility *facility int level const char *format ...);
    krb5_error_code krb5_log_msg (krb5_context context krb5_log_facility *facility char **reply int level const char *format ...);
    krb5_error_code krb5_openlog (krb5_context context const char *program krb5_log_facility **facility);
    krb5_error_code krb5_vlog (krb5_context context krb5_log_facility *facility int level const char *format va_list arglist);
    krb5_error_code krb5_vlog_msg (krb5_context context krb5_log_facility *facility char **reply int level const char *format va_list arglist);
     

    DESCRIPTION

    These functions logs messages to one or more destinations.

    The krb5_openlog ();
    function creates a logging Fa facility , that is used to log messages. A facility consists of one or more destinations (which can be files or syslog or some other device). The Fa program parameter should be the generic name of the program that is doing the logging. This name is used to lookup which destinations to use. This information is contained in the logging section of the krb5.conf configuration file. If no entry is found for Fa program , the entry for default is used, or if that is missing too, SYSLOG will be used as destination.

    To close a logging facility, use the krb5_closelog ();
    function.

    To log a message to a facility use one of the functions krb5_log (,);
    krb5_log_msg (,);
    krb5_vlog (,);
    or krb5_vlog_msg (.);
    The functions ending in _msg return in Fa reply a pointer to the message that just got logged. This string is allocated, and should be freed with free (.);
    The Fa format is a standard printf ();
    style format string (but see the BUGS section).

    If you want better control of where things gets logged, you can instead of using krb5_openlog ();
    call krb5_initlog (,);
    which just initializes a facility, but doesn't define any actual logging destinations. You can then add destinations with the krb5_addlog_dest ();
    and krb5_addlog_func ();
    functions. The first of these takes a string specifying a logging destination, and adds this to the facility. If you want to do some non-standard logging you can use the krb5_addlog_func ();
    function, which takes a function to use when logging. The Fa log function is called for each message with Fa time being a string specifying the current time, and Fa message the message to log. Fa close is called when the facility is closed. You can pass application specific data in the Fa data parameter. The Fa min and Fa max parameter are the same as in a destination (defined below). To specify a max of infinity, pass -1.

    krb5_openlog ();
    calls krb5_initlog ();
    and then calls krb5_addlog_dest ();
    for each destination found.  

    Destinations

    The defined destinations (as specified in krb5.conf follows:

    STDERR
    This logs to the program's stderr.
    FILE: /file
    FILE= /file
    Log to the specified file. The form using a colon appends to the file, the form with an equal truncates the file. The truncating form keeps the file open, while the appending form closes it after each log message (which makes it possible to rotate logs). The truncating form is mainly for compatibility with the MIT libkrb5.
    DEVICE= /device
    This logs to the specified device, at present this is the same as FILE:/device
    CONSOLE
    Log to the console, this is the same as DEVICE=/dev/console
    SYSLOG [:priority [:facility] ]
    Send messages to the syslog system, using priority, and facility. To get the name for one of these, you take the name of the macro passed to syslog(3), and remove the leading LOG_ ( LOG_NOTICE becomes NOTICE ) The default values (as well as the values used for unrecognised values), are ERR and AUTH respectively. See syslog(3) for a list of priorities and facilities.

    Each destination may optionally be prepended with a range of logging levels, specified as min-max/ If the Fa level parameter to krb5_log ();
    is within this range (inclusive) the message gets logged to this destination, otherwise not. Either of the min and max valued may be omitted, in this case min is assumed to be zero, and max is assumed to be infinity. If you don't include a dash, both min and max gets set to the specified value. If no range is specified, all messages gets logged.  

    EXAMPLE

    [logging]
            kdc = 0/FILE:/var/log/kdc.log
            kdc = 1-/SYSLOG:INFO:USER
            default = STDERR
    

    This will log all messages from the kdc program with level 0 to /var/log/kdc.log other messages will be logged to syslog with priority LOG_INFO and facility LOG_USER All other programs will log all messages to their stderr.  

    BUGS

    These functions use asprintf ();
    to format the message. If your operating system does not have a working asprintf (,);
    a replacement will be used. At present this replacement does not handle some correct conversion specifications (like floating point numbers). Until this is fixed, the use of these conversions should be avoided.

    If logging is done to the syslog facility, these functions might not be thread-safe, depending on the implementation of openlog (,);
    and syslog (.);
     

    SEE ALSO

    syslog(3), krb5.conf5


     

    Index

    NAME
    LIBRARY
    SYNOPSIS
    DESCRIPTION
    Destinations
    EXAMPLE
    BUGS
    SEE ALSO


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру