The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

mii-tool (8)
  • >> mii-tool (8) ( Linux man: Команды системного администрирования )
  •  

    NAME

    mii-tool - view, manipulate media-independent interface status
    

     

    SYNOPSIS

    mii-tool [-v, --verbose] [-V, --version] [-R, --reset] [-r, --restart] [-w, --watch] [-l, --log] [-A, --advertise=media,...] [-F, --force=media] [interface ...]

     

    NOTE

    This program is obsolete. Valid media are only 100baseT4, 100baseTx-FD,100baseTx-HD, 10baseT-FD and 10baseT-HD ethernet cards. For replacement check ethtool.

     

    DESCRIPTION

    This utility checks or sets the status of a network interface's Media Independent Interface (MII) unit. Most fast ethernet adapters use an MII to autonegotiate link speed and duplex setting.

    Most intelligent network devices use an autonegotiation protocol to communicate what media technologies they support, and then select the fastest mutually supported media technology. The -A or --advertise options can be used to tell the MII to only advertise a subset of its capabilities. Some passive devices, such as single-speed hubs, are unable to autonegotiate. To handle such devices, the MII protocol also allows for establishing a link by simply detecting either a 10baseT or 100baseT link beat. The -F or --force options can be used to force the MII to operate in one mode, instead of autonegotiating. The -A and -F options are mutually exclusive.

    The default short output reports the negotiated link speed and link status for each interface. If an interface or interfaces are not specified on the command line, then mii-tool will check any available interfaces from eth0 through eth7.  

    OPTIONS

    -v, --verbose
    Display more detailed MII status information. If used twice, also display raw MII register contents.
    -V, --version
    Display program version information.
    -R, --reset
    Reset the MII to its default configuration.
    -r, --restart
    Restart autonegotiation.
    -w, --watch
    Watch interface(s) and report changes in link status. The MII interfaces are polled at one second intervals.
    -l, --log
    Used with -w, records link status changes in the system log instead of printing on standard output.
    -F media, --force=media
    Disable autonegotiation, and force the MII to either 100baseTx-FD, 100baseTx-HD, 10baseT-FD, or 10baseT-HD operation.
    -A media,..., --advertise=media,...
    Enable and restart autonegotiation, and advertise only the specified media technologies. Multiple technologies should be separated by commas. Valid media are 100baseT4, 100baseTx-FD, 100baseTx-HD, 10baseT-FD, and 10baseT-HD.

     

    SEE ALSO

    ethtool(8)

     

    AUTHORS

    David Hinds - [email protected]
    Donald Becker - [email protected]


     

    Index

    NAME
    SYNOPSIS
    NOTE
    DESCRIPTION
    OPTIONS
    SEE ALSO
    AUTHORS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру