The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

netgraph (4)
  • netgraph (3) ( FreeBSD man: Библиотечные вызовы )
  • >> netgraph (4) ( FreeBSD man: Специальные файлы /dev/* )
  • Ключ netgraph обнаружен в базе ключевых слов.

  • BSD mandoc
     

    NAME

    
    
    netgraph
    
     - graph based kernel networking subsystem
    
     
    

    DESCRIPTION

    The system provides a uniform and modular system for the implementation of kernel objects which perform various networking functions. The objects, known as nodes can be arranged into arbitrarily complicated graphs. Nodes have hooks which are used to connect two nodes together, forming the edges in the graph. Nodes communicate along the edges to process data, implement protocols, etc.

    The aim of is to supplement rather than replace the existing kernel networking infrastructure. It provides:

     

    Nodes and Types

    The most fundamental concept in is that of a node All nodes implement a number of predefined methods which allow them to interact with other nodes in a well defined manner.

    Each node has a type which is a static property of the node determined at node creation time. A node's type is described by a unique ASCII type name. The type implies what the node does and how it may be connected to other nodes.

    In object-oriented language, types are classes, and nodes are instances of their respective class. All node types are subclasses of the generic node type, and hence inherit certain common functionality and capabilities (e.g., the ability to have an ASCII name).

    Nodes may be assigned a globally unique ASCII name which can be used to refer to the node. The name must not contain the characters `.' or `:' , and is limited to NG_NODESIZ characters (including the terminating NUL character).

    Each node instance has a unique ID number which is expressed as a 32-bit hexadecimal value. This value may be used to refer to a node when there is no ASCII name assigned to it.  

    Hooks

    Nodes are connected to other nodes by connecting a pair of hooks one from each node. Data flows bidirectionally between nodes along connected pairs of hooks. A node may have as many hooks as it needs, and may assign whatever meaning it wants to a hook.

    Hooks have these properties:

    A node may decide to assign special meaning to some hooks. For example, connecting to the hook named debug might trigger the node to start sending debugging information to that hook.  

    Data Flow

    Two types of information flow between nodes: data messages and control messages. Data messages are passed in Vt mbuf chains along the edges in the graph, one edge at a time. The first Vt mbuf in a chain must have the M_PKTHDR flag set. Each node decides how to handle data received through one of its hooks.

    Along with data, nodes can also receive control messages. There are generic and type-specific control messages. Control messages have a common header format, followed by type-specific data, and are binary structures for efficiency. However, node types may also support conversion of the type-specific data between binary and ASCII formats, for debugging and human interface purposes (see the NGM_ASCII2BINARY and NGM_BINARY2ASCII generic control messages below). Nodes are not required to support these conversions.

    There are three ways to address a control message. If there is a sequence of edges connecting the two nodes, the message may be ``source routed'' by specifying the corresponding sequence of ASCII hook names as the destination address for the message (relative addressing). If the destination is adjacent to the source, then the source node may simply specify (as a pointer in the code) the hook across which the message should be sent. Otherwise, the recipient node's global ASCII name (or equivalent ID-based name) is used as the destination address for the message (absolute addressing). The two types of ASCII addressing may be combined, by specifying an absolute start node and a sequence of hooks. Only the ASCII addressing modes are available to control programs outside the kernel; use of direct pointers is limited to kernel modules.

    Messages often represent commands that are followed by a reply message in the reverse direction. To facilitate this, the recipient of a control message is supplied with a ``return address'' that is suitable for addressing a reply.

    Each control message contains a 32-bit value, called a ``typecookie'' indicating the type of the message, i.e. how to interpret it. Typically each type defines a unique typecookie for the messages that it understands. However, a node may choose to recognize and implement more than one type of messages.

    If a message is delivered to an address that implies that it arrived at that node through a particular hook (as opposed to having been directly addressed using its ID or global name) then that hook is identified to the receiving node. This allows a message to be re-routed or passed on, should a node decide that this is required, in much the same way that data packets are passed around between nodes. A set of standard messages for flow control and link management purposes are defined by the base system that are usually passed around in this manner. Flow control message would usually travel in the opposite direction to the data to which they pertain.  

    Netgraph is (Usually) Functional

    In order to minimize latency, most operations are functional. That is, data and control messages are delivered by making function calls rather than by using queues and mailboxes. For example, if node A wishes to send a data Vt mbuf to neighboring node B, it calls the generic data delivery function. This function in turn locates node B and calls B's ``receive data'' method. There are exceptions to this.

    Each node has an input queue, and some operations can be considered to be writers in that they alter the state of the node. Obviously, in an SMP world it would be bad if the state of a node were changed while another data packet were transiting the node. For this purpose, the input queue implements a reader/writer semantic so that when there is a writer in the node, all other requests are queued, and while there are readers, a writer, and any following packets are queued. In the case where there is no reason to queue the data, the input method is called directly, as mentioned above.

    A node may declare that all requests should be considered as writers, or that requests coming in over a particular hook should be considered to be a writer, or even that packets leaving or entering across a particular hook should always be queued, rather than delivered directly (often useful for interrupt routines who want to get back to the hardware quickly). By default, all control message packets are considered to be writers unless specifically declared to be a reader in their definition. (See NGM_READONLY in In ng_message.h . )

    While this mode of operation results in good performance, it has a few implications for node developers:

    So far, these issues have not proven problematical in practice.  

    Interaction with Other Parts of the Kernel

    A node may have a hidden interaction with other components of the kernel outside of the subsystem, such as device hardware, kernel protocol stacks, etc. In fact, one of the benefits of is the ability to join disparate kernel networking entities together in a consistent communication framework.

    An example is the Vt socket node type which is both a node and a socket(2) in the protocol family PF_NETGRAPH Socket nodes allow user processes to participate in . Other nodes communicate with socket nodes using the usual methods, and the node hides the fact that it is also passing information to and from a cooperating user process.

    Another example is a device driver that presents a node interface to the hardware.  

    Node Methods

    Nodes are notified of the following actions via function calls to the following node methods, and may accept or reject that action (by returning the appropriate error code):

    Creation of a new node
    The constructor for the type is called. If creation of a new node is allowed, constructor method may allocate any special resources it needs. For nodes that correspond to hardware, this is typically done during the device attach routine. Often a global ASCII name corresponding to the device name is assigned here as well.
    Creation of a new hook
    The hook is created and tentatively linked to the node, and the node is told about the name that will be used to describe this hook. The node sets up any special data structures it needs, or may reject the connection, based on the name of the hook.
    Successful connection of two hooks
    After both ends have accepted their hooks, and the links have been made, the nodes get a chance to find out who their peer is across the link, and can then decide to reject the connection. Tear-down is automatic. This is also the time at which a node may decide whether to set a particular hook (or its peer) into the queueing mode.
    Destruction of a hook
    The node is notified of a broken connection. The node may consider some hooks to be critical to operation and others to be expendable: the disconnection of one hook may be an acceptable event while for another it may effect a total shutdown for the node.
    Preshutdown of a node
    This method is called before real shutdown, which is discussed below. While in this method, the node is fully operational and can send a ``goodbye'' message to its peers, or it can exclude itself from the chain and reconnect its peers together, like the ng_tee4 node type does.
    Shutdown of a node
    This method allows a node to clean up and to ensure that any actions that need to be performed at this time are taken. The method is called by the generic (i.e., superclass) node destructor which will get rid of the generic components of the node. Some nodes (usually associated with a piece of hardware) may be persistent in that a shutdown breaks all edges and resets the node, but does not remove it. In this case, the shutdown method should not free its resources, but rather, clean up and then call the NG_NODE_REVIVE ();
    macro to signal the generic code that the shutdown is aborted. In the case where the shutdown is started by the node itself due to hardware removal or unloading (via ng_rmnode_self () ,);
    it should set the NGF_REALLY_DIE flag to signal to its own shutdown method that it is not to persist.

     

    Sending and Receiving Data

    Two other methods are also supported by all nodes:

    Receive data message
    A queueable request item usually referred to as an item is received by this function. The item contains a pointer to an Vt mbuf .

    The node is notified on which hook the item has arrived, and can use this information in its processing decision. The receiving node must always NG_FREE_M ();
    the Vt mbuf chain on completion or error, or pass it on to another node (or kernel module) which will then be responsible for freeing it. Similarly, the item must be freed if it is not to be passed on to another node, by using the NG_FREE_ITEM ();
    macro. If the item still holds references to Vt mbufs at the time of freeing then they will also be appropriately freed. Therefore, if there is any chance that the Vt mbuf will be changed or freed separately from the item, it is very important that it be retrieved using the NGI_GET_M ();
    macro that also removes the reference within the item. (Or multiple frees of the same object will occur.)

    If it is only required to examine the contents of the Vt mbufs , then it is possible to use the NGI_M ();
    macro to both read and rewrite Vt mbuf pointer inside the item.

    If developer needs to pass any meta information along with the Vt mbuf chain , he should use mbuf_tags9 framework. Bf -symbolic Note that old specific meta-data format is obsoleted now. Ef

    The receiving node may decide to defer the data by queueing it in the NETISR system (see below). It achieves this by setting the HK_QUEUE flag in the flags word of the hook on which that data will arrive. The infrastructure will respect that bit and queue the data for delivery at a later time, rather than deliver it directly. A node may decide to set the bit on the peer node, so that its own output packets are queued.

    The node may elect to nominate a different receive data function for data received on a particular hook, to simplify coding. It uses the NG_HOOK_SET_RCVDATA (hook fn);
    macro to do this. The function receives the same arguments in every way other than it will receive all (and only) packets from that hook.

    Receive control message
    This method is called when a control message is addressed to the node. As with the received data, an item is received, with a pointer to the control message. The message can be examined using the NGI_MSG ();
    macro, or completely extracted from the item using the NGI_GET_MSG ();
    which also removes the reference within the item. If the Item still holds a reference to the message when it is freed (using the NG_FREE_ITEM ();
    macro), then the message will also be freed appropriately. If the reference has been removed, the node must free the message itself using the NG_FREE_MSG ();
    macro. A return address is always supplied, giving the address of the node that originated the message so a reply message can be sent anytime later. The return address is retrieved from the item using the NGI_RETADDR ();
    macro and is of type Vt ng_ID_t . All control messages and replies are allocated with the malloc(9) type M_NETGRAPH_MSG however it is more convenient to use the NG_MKMESSAGE ();
    and NG_MKRESPONSE ();
    macros to allocate and fill out a message. Messages must be freed using the NG_FREE_MSG ();
    macro.

    If the message was delivered via a specific hook, that hook will also be made known, which allows the use of such things as flow-control messages, and status change messages, where the node may want to forward the message out another hook to that on which it arrived.

    The node may elect to nominate a different receive message function for messages received on a particular hook, to simplify coding. It uses the NG_HOOK_SET_RCVMSG (hook fn);
    macro to do this. The function receives the same arguments in every way other than it will receive all (and only) messages from that hook.

    Much use has been made of reference counts, so that nodes being freed of all references are automatically freed, and this behaviour has been tested and debugged to present a consistent and trustworthy framework for the ``type module'' writer to use.  

    Addressing

    The framework provides an unambiguous and simple to use method of specifically addressing any single node in the graph. The naming of a node is independent of its type, in that another node, or external component need not know anything about the node's type in order to address it so as to send it a generic message type. Node and hook names should be chosen so as to make addresses meaningful.

    Addresses are either absolute or relative. An absolute address begins with a node name or ID, followed by a colon, followed by a sequence of hook names separated by periods. This addresses the node reached by starting at the named node and following the specified sequence of hooks. A relative address includes only the sequence of hook names, implicitly starting hook traversal at the local node.

    There are a couple of special possibilities for the node name. The name `.' (referred to as `.:' ) always refers to the local node. Also, nodes that have no global name may be addressed by their ID numbers, by enclosing the hexadecimal representation of the ID number within the square brackets. Here are some examples of valid addresses:

    .:
    [3f]:
    foo:
    .:hook1
    foo:hook1.hook2
    [d80]:hook1
    

    The following set of nodes might be created for a site with a single physical frame relay line having two active logical DLCI channels, with RFC 1490 frames on DLCI 16 and PPP frames over DLCI 20:

    [type SYNC ]                  [type FRAME]                 [type RFC1490]
    [ "Frame1" ](uplink)<-->(data)[<un-named>](dlci16)<-->(mux)[<un-named>  ]
    [    A     ]                  [    B     ](dlci20)<---+    [     C      ]
                                                          |
                                                          |      [ type PPP ]
                                                          +>(mux)[<un-named>]
                                                                 [    D     ]
    

    One could always send a control message to node C from anywhere by using the name ``Frame1:uplink.dlci16 '' In this case, node C would also be notified that the message reached it via its hook mux Similarly, ``Frame1:uplink.dlci20 '' could reliably be used to reach node D, and node A could refer to node B as ``.:uplink '' or simply ``uplink '' Conversely, B can refer to A as ``data '' The address ``mux.data '' could be used by both nodes C and D to address a message to node A.

    Note that this is only for control messages In each of these cases, where a relative addressing mode is used, the recipient is notified of the hook on which the message arrived, as well as the originating node. This allows the option of hop-by-hop distribution of messages and state information. Data messages are only routed one hop at a time, by specifying the departing hook, with each node making the next routing decision. So when B receives a frame on hook data it decodes the frame relay header to determine the DLCI, and then forwards the unwrapped frame to either C or D.

    In a similar way, flow control messages may be routed in the reverse direction to outgoing data. For example a ``buffer nearly full'' message from ``Frame1: '' would be passed to node B which might decide to send similar messages to both nodes C and D. The nodes would use direct hook pointer addressing to route the messages. The message may have travelled from ``Frame1: '' to B as a synchronous reply, saving time and cycles.

    A similar graph might be used to represent multi-link PPP running over an ISDN line:

    [ type BRI ](B1)<--->(link1)[ type MPP  ]
    [  "ISDN1" ](B2)<--->(link2)[ (no name) ]
    [          ](D) <-+
                      |
     +----------------+
     |
     +->(switch)[ type Q.921 ](term1)<---->(datalink)[ type Q.931 ]
                [ (no name)  ]                       [ (no name)  ]
    
     

    Netgraph Structures

    Structures are defined in    #include <netgraph/netgraph.h>
    (for kernel structures only of interest to nodes) and    #include <netgraph/ng_message.h>
    (for message definitions also of interest to user programs).

    The two basic object types that are of interest to node authors are nodes and hooks These two objects have the following properties that are also of interest to the node writers.

    Vt struct ng_node
    Node authors should always use the following typedef to declare their pointers, and should never actually declare the structure.

    Fd typedef struct ng_node *node_p;

    The following properties are associated with a node, and can be accessed in the following manner:

    Validity
    A driver or interrupt routine may want to check whether the node is still valid. It is assumed that the caller holds a reference on the node so it will not have been freed, however it may have been disabled or otherwise shut down. Using the NG_NODE_IS_VALID (node);
    macro will return this state. Eventually it should be almost impossible for code to run in an invalid node but at this time that work has not been completed.
    Node ID (Vt ng_ID_t )
    This property can be retrieved using the macro NG_NODE_ID (node .);
    Node name
    Optional globally unique name, NUL terminated string. If there is a value in here, it is the name of the node.
    if (NG_NODE_NAME(node)[0] != '\0') ...
    
    if (strcmp(NG_NODE_NAME(node), "fred") == 0) ...
    
    A node dependent opaque cookie
    Anything of the pointer type can be placed here. The macros NG_NODE_SET_PRIVATE (node value);
    and NG_NODE_PRIVATE (node);
    set and retrieve this property, respectively.
    Number of hooks
    The NG_NODE_NUMHOOKS (node);
    macro is used to retrieve this value.
    Hooks
    The node may have a number of hooks. A traversal method is provided to allow all the hooks to be tested for some condition. NG_NODE_FOREACH_HOOK (node fn arg rethook);
    where Fa fn is a function that will be called for each hook with the form fn (hook arg);
    and returning 0 to terminate the search. If the search is terminated, then Fa rethook will be set to the hook at which the search was terminated.

    Vt struct ng_hook
    Node authors should always use the following typedef to declare their hook pointers.

    Fd typedef struct ng_hook *hook_p;

    The following properties are associated with a hook, and can be accessed in the following manner:

    A hook dependent opaque cookie
    Anything of the pointer type can be placed here. The macros NG_HOOK_SET_PRIVATE (hook value);
    and NG_HOOK_PRIVATE (hook);
    set and retrieve this property, respectively.
    An associate node
    The macro NG_HOOK_NODE (hook);
    finds the associated node.
    A peer hook (Vt hook_p )
    The other hook in this connected pair. The NG_HOOK_PEER (hook);
    macro finds the peer.
    References
    The NG_HOOK_REF (hook);
    and NG_HOOK_UNREF (hook);
    macros increment and decrement the hook reference count accordingly. After decrement you should always assume the hook has been freed unless you have another reference still valid.
    Override receive functions
    The NG_HOOK_SET_RCVDATA (hook fn);
    and NG_HOOK_SET_RCVMSG (hook fn);
    macros can be used to set override methods that will be used in preference to the generic receive data and receive message functions. To unset these, use the macros to set them to NULL They will only be used for data and messages received on the hook on which they are set.

    The maintenance of the names, reference counts, and linked list of hooks for each node is handled automatically by the subsystem. Typically a node's private info contains a back-pointer to the node or hook structure, which counts as a new reference that must be included in the reference count for the node. When the node constructor is called, there is already a reference for this calculated in, so that when the node is destroyed, it should remember to do a NG_NODE_UNREF ();
    on the node.

    From a hook you can obtain the corresponding node, and from a node, it is possible to traverse all the active hooks.

    A current example of how to define a node can always be seen in src/sys/netgraph/ng_sample.c and should be used as a starting point for new node writers.

     

    Netgraph Message Structure

    Control messages have the following structure:
    #define NG_CMDSTRSIZ    32      /* Max command string (including nul) */
    
    struct ng_mesg {
      struct ng_msghdr {
        u_char      version;        /* Must equal NG_VERSION */
        u_char      spare;          /* Pad to 2 bytes */
        u_short     arglen;         /* Length of cmd/resp data */
        u_long      flags;          /* Message status flags */
        u_long      token;          /* Reply should have the same token */
        u_long      typecookie;     /* Node type understanding this message */
        u_long      cmd;            /* Command identifier */
        u_char      cmdstr[NG_CMDSTRSIZ]; /* Cmd string (for debug) */
      } header;
      char  data[0];                /* Start of cmd/resp data */
    };
    
    #define NG_ABI_VERSION  5               /* Netgraph kernel ABI version */
    #define NG_VERSION      4               /* Netgraph message version */
    #define NGF_ORIG        0x0000          /* Command */
    #define NGF_RESP        0x0001          /* Response */
    

    Control messages have the fixed header shown above, followed by a variable length data section which depends on the type cookie and the command. Each field is explained below:

    version
    Indicates the version of the message protocol itself. The current version is NG_VERSION
    arglen
    This is the length of any extra arguments, which begin at data
    flags
    Indicates whether this is a command or a response control message.
    token
    The token is a means by which a sender can match a reply message to the corresponding command message; the reply always has the same token.
    typecookie
    The corresponding node type's unique 32-bit value. If a node does not recognize the type cookie it must reject the message by returning Er EINVAL .

    Each type should have an include file that defines the commands, argument format, and cookie for its own messages. The typecookie insures that the same header file was included by both sender and receiver; when an incompatible change in the header file is made, the typecookie must be changed. The de-facto method for generating unique type cookies is to take the seconds from the Epoch at the time the header file is written (i.e., the output of ``date -u +%s ''

    There is a predefined typecookie NGM_GENERIC_COOKIE for the Vt generic node type, and a corresponding set of generic messages which all nodes understand. The handling of these messages is automatic.

    cmd
    The identifier for the message command. This is type specific, and is defined in the same header file as the typecookie.
    cmdstr
    Room for a short human readable version of command (for debugging purposes only).

    Some modules may choose to implement messages from more than one of the header files and thus recognize more than one type cookie.  

    Control Message ASCII Form

    Control messages are in binary format for efficiency. However, for debugging and human interface purposes, and if the node type supports it, control messages may be converted to and from an equivalent ASCII form. The ASCII form is similar to the binary form, with two exceptions:

    1. The cmdstr header field must contain the ASCII name of the command, corresponding to the cmd header field.
    2. The arguments field contains a NUL -terminated ASCII string version of the message arguments.

    In general, the arguments field of a control message can be any arbitrary C data type. Netgraph includes parsing routines to support some pre-defined datatypes in ASCII with this simple syntax:

    Each node type may define its own arbitrary types by providing the necessary routines to parse and unparse. ASCII forms defined for a specific node type are documented in the corresponding man page.  

    Generic Control Messages

    There are a number of standard predefined messages that will work for any node, as they are supported directly by the framework itself. These are defined in    #include <netgraph/ng_message.h>
    along with the basic layout of messages and other similar information.

    NGM_CONNECT
    Connect to another node, using the supplied hook names on either end.
    NGM_MKPEER
    Construct a node of the given type and then connect to it using the supplied hook names.
    NGM_SHUTDOWN
    The target node should disconnect from all its neighbours and shut down. Persistent nodes such as those representing physical hardware might not disappear from the node namespace, but only reset themselves. The node must disconnect all of its hooks. This may result in neighbors shutting themselves down, and possibly a cascading shutdown of the entire connected graph.
    NGM_NAME
    Assign a name to a node. Nodes can exist without having a name, and this is the default for nodes created using the NGM_MKPEER method. Such nodes can only be addressed relatively or by their ID number.
    NGM_RMHOOK
    Ask the node to break a hook connection to one of its neighbours. Both nodes will have their ``disconnect'' method invoked. Either node may elect to totally shut down as a result.
    NGM_NODEINFO
    Asks the target node to describe itself. The four returned fields are the node name (if named), the node type, the node ID and the number of hooks attached. The ID is an internal number unique to that node.
    NGM_LISTHOOKS
    This returns the information given by NGM_NODEINFO but in addition includes an array of fields describing each link, and the description for the node at the far end of that link.
    NGM_LISTNAMES
    This returns an array of node descriptions (as for NGM_NODEINFO where each entry of the array describes a named node. All named nodes will be described.
    NGM_LISTNODES
    This is the same as NGM_LISTNAMES except that all nodes are listed regardless of whether they have a name or not.
    NGM_LISTTYPES
    This returns a list of all currently installed types.
    NGM_TEXT_STATUS
    The node may return a text formatted status message. The status information is determined entirely by the node type. It is the only ``generic'' message that requires any support within the node itself and as such the node may elect to not support this message. The text response must be less than NG_TEXTRESPONSE bytes in length (presently 1024). This can be used to return general status information in human readable form.
    NGM_BINARY2ASCII
    This message converts a binary control message to its ASCII form. The entire control message to be converted is contained within the arguments field of the NGM_BINARY2ASCII message itself. If successful, the reply will contain the same control message in ASCII form. A node will typically only know how to translate messages that it itself understands, so the target node of the NGM_BINARY2ASCII is often the same node that would actually receive that message.
    NGM_ASCII2BINARY
    The opposite of NGM_BINARY2ASCII The entire control message to be converted, in ASCII form, is contained in the arguments section of the NGM_ASCII2BINARY and need only have the flags , cmdstr and arglen header fields filled in, plus the NUL -terminated string version of the arguments in the arguments field. If successful, the reply contains the binary version of the control message.

     

    Flow Control Messages

    In addition to the control messages that affect nodes with respect to the graph, there are also a number of flow control messages defined. At present these are not handled automatically by the system, so nodes need to handle them if they are going to be used in a graph utilising flow control, and will be in the likely path of these messages. The default action of a node that does not understand these messages should be to pass them onto the next node. Hopefully some helper functions will assist in this eventually. These messages are also defined in    #include <netgraph/ng_message.h>
    and have a separate cookie NG_FLOW_COOKIE to help identify them. They will not be covered in depth here.  

    INITIALIZATION

    The base code may either be statically compiled into the kernel or else loaded dynamically as a KLD via kldload(8). In the former case, include

    in your kernel configuration file. You may also include selected node types in the kernel compilation, for example:

    Once the subsystem is loaded, individual node types may be loaded at any time as KLD modules via kldload(8). Moreover, knows how to automatically do this; when a request to create a new node of unknown type type is made, will attempt to load the KLD module ng_ Ao type Ac .ko

    Types can also be installed at boot time, as certain device drivers may want to export each instance of the device as a node.

    In general, new types can be installed at any time from within the kernel by calling ng_newtype (,);
    supplying a pointer to the type's Vt struct ng_type structure.

    The NETGRAPH_INIT ();
    macro automates this process by using a linker set.  

    EXISTING NODE TYPES

    Several node types currently exist. Each is fully documented in its own man page:

    SOCKET
    The socket type implements two new sockets in the new protocol domain PF_NETGRAPH The new sockets protocols are NG_DATA and NG_CONTROL both of type SOCK_DGRAM Typically one of each is associated with a socket node. When both sockets have closed, the node will shut down. The NG_DATA socket is used for sending and receiving data, while the NG_CONTROL socket is used for sending and receiving control messages. Data and control messages are passed using the sendto(2) and recvfrom(2) system calls, using a Vt struct sockaddr_ng socket address.
    HOLE
    Responds only to generic messages and is a ``black hole'' for data. Useful for testing. Always accepts new hooks.
    ECHO
    Responds only to generic messages and always echoes data back through the hook from which it arrived. Returns any non-generic messages as their own response. Useful for testing. Always accepts new hooks.
    TEE
    This node is useful for ``snooping'' It has 4 hooks: left , right , left2right and right2left Data entering from the right is passed to the left and duplicated on right2left and data entering from the left is passed to the right and duplicated on left2right Data entering from left2right is sent to the right and data from right2left to left
    RFC1490 MUX
    Encapsulates/de-encapsulates frames encoded according to RFC 1490. Has a hook for the encapsulated packets (downstream ) and one hook for each protocol (i.e., IP, PPP, etc.).
    FRAME RELAY MUX
    Encapsulates/de-encapsulates Frame Relay frames. Has a hook for the encapsulated packets (downstream ) and one hook for each DLCI.
    FRAME RELAY LMI
    Automatically handles frame relay ``LMI'' (link management interface) operations and packets. Automatically probes and detects which of several LMI standards is in use at the exchange.
    TTY
    This node is also a line discipline. It simply converts between Vt mbuf frames and sequential serial data, allowing a TTY to appear as a node. It has a programmable ``hotkey'' character.
    ASYNC
    This node encapsulates and de-encapsulates asynchronous frames according to RFC 1662. This is used in conjunction with the TTY node type for supporting PPP links over asynchronous serial lines.
    ETHERNET
    This node is attached to every Ethernet interface in the system. It allows capturing raw Ethernet frames from the network, as well as sending frames out of the interface.
    INTERFACE
    This node is also a system networking interface. It has hooks representing each protocol family (IP, AppleTalk, IPX, etc.) and appears in the output of ifconfig(8). The interfaces are named ``ng0 '' ``ng1 '' etc.
    ONE2MANY
    This node implements a simple round-robin multiplexer. It can be used for example to make several LAN ports act together to get a higher speed link between two machines.
    Various PPP related nodes
    There is a full multilink PPP implementation that runs in . The net/mpd port can use these modules to make a very low latency high capacity PPP system. It also supports PPTP VPNs using the PPTP node.
    PPPOE
    A server and client side implementation of PPPoE. Used in conjunction with either ppp(8) or the net/mpd port.
    BRIDGE
    This node, together with the Ethernet nodes, allows a very flexible bridging system to be implemented.
    KSOCKET
    This intriguing node looks like a socket to the system but diverts all data to and from the system for further processing. This allows such things as UDP tunnels to be almost trivially implemented from the command line.

    Refer to the section at the end of this man page for more nodes types.  

    NOTES

    Whether a named node exists can be checked by trying to send a control message to it (e.g., NGM_NODEINFO ) If it does not exist, Er ENOENT will be returned.

    All data messages are Vt mbuf chains with the M_PKTHDR flag set.

    Nodes are responsible for freeing what they allocate. There are three exceptions:

    1. Vt Mbufs sent across a data link are never to be freed by the sender.    #include <the>
      case of error, they should be considered freed.
    2. Messages sent using one of NG_SEND_MSG_ (*);
      family macros are freed by the recipient. As in the case above, the addresses associated with the message are freed by whatever allocated them so the recipient should copy them if it wants to keep that information.
    3. Both control messages and data are delivered and queued with a item The item must be freed using NG_FREE_ITEM (item);
      or passed on to another node.

     

    FILES

    In netgraph/netgraph.h
    Definitions for use solely within the kernel by nodes.
    In netgraph/ng_message.h
    Definitions needed by any file that needs to deal with messages.
    In netgraph/ng_socket.h
    Definitions needed to use Vt socket type nodes.
    In netgraph/ng_ Ao type Ac .h
    Definitions needed to use type nodes, including the type cookie definition.
    /boot/kernel/netgraph.ko
    The subsystem loadable KLD module.
    /boot/kernel/ng_ Ao type Ac .ko
    Loadable KLD module for node type type
    src/sys/netgraph/ng_sample.c
    Skeleton node. Use this as a starting point for new node types.

     

    USER MODE SUPPORT

    There is a library for supporting user-mode programs that wish to interact with the system. See netgraph(3) for details.

    Two user-mode support programs, ngctl(8) and nghook(8), are available to assist manual configuration and debugging.

    There are a few useful techniques for debugging new node types. First, implementing new node types in user-mode first makes debugging easier. The Vt tee node type is also useful for debugging, especially in conjunction with ngctl(8) and nghook(8).

    Also look in /usr/share/examples/netgraph for solutions to several common networking problems, solved using .  

    SEE ALSO

    socket(2), netgraph(3), ng_async4, ng_atm4, ng_atmllc4, ng_bluetooth4, ng_bpf4, ng_bridge4, ng_bt3c4, ng_btsocket4, ng_cisco4, ng_device4, ng_echo4, ng_eiface4, ng_etf4, ng_ether4, ng_fec4, ng_frame_relay4, ng_gif4, ng_gif_demux4, ng_h44, ng_hci4, ng_hole4, ng_hub4, ng_iface4, ng_ip_input4, ng_ksocket4, ng_l2cap4, ng_l2tp4, ng_lmi4, ng_mppc4, ng_netflow4, ng_one2many4, ng_ppp4, ng_pppoe4, ng_pptpgre4, ng_rfc14904, ng_socket4, ng_split4, ng_sppp4, ng_sscfu4, ng_sscop4, ng_tee4, ng_tty4, ng_ubt4, ng_UI4, ng_uni4, ng_vjc4, ng_vlan4, ngctl(8), nghook(8)  

    HISTORY

    The system was designed and first implemented at Whistle Communications, Inc. in a version of Fx 2.2 customized for the Whistle InterJet. It first made its debut in the main tree in Fx 3.4 .  

    AUTHORS

    An -nosplit An Julian Elischer Aq [email protected] , with contributions by An Archie Cobbs Aq [email protected] .


     

    Index

    NAME
    DESCRIPTION
    Nodes and Types
    Hooks
    Data Flow
    Netgraph is (Usually) Functional
    Interaction with Other Parts of the Kernel
    Node Methods
    Sending and Receiving Data
    Addressing
    Netgraph Structures
    Netgraph Message Structure
    Control Message ASCII Form
    Generic Control Messages
    Flow Control Messages
    INITIALIZATION
    EXISTING NODE TYPES
    NOTES
    FILES
    USER MODE SUPPORT
    SEE ALSO
    HISTORY
    AUTHORS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру