The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

netstat (8)
  • netstat (1) ( Solaris man: Команды и прикладные программы пользовательского уровня )
  • netstat (1) ( FreeBSD man: Команды и прикладные программы пользовательского уровня )
  • netstat (1) ( Русские man: Команды и прикладные программы пользовательского уровня )
  • >> netstat (8) ( Linux man: Команды системного администрирования )
  • Ключ netstat обнаружен в базе ключевых слов.
  •  

    NAME

    netstat - Print network connections, routing tables, interface statistics, masquerade connections, and multicast memberships
    

     

    SYNOPSIS

    netstat [address_family_options] [--tcp|-t] [--udp|-u] [--raw|-w] [--listening|-l] [--all|-a] [--numeric|-n] [--numeric-hosts][--numeric-ports][--numeric-ports] [--symbolic|-N] [--extend|-e[--extend|-e]] [--timers|-o] [--program|-p] [--verbose|-v] [--continuous|-c] [delay] netstat {--route|-r} [address_family_options] [--extend|-e[--extend|-e]] [--verbose|-v] [--numeric|-n] [--numeric-hosts][--numeric-ports][--numeric-ports] [--continuous|-c] [delay] netstat {--interfaces|-i} [iface] [--all|-a] [--extend|-e[--extend|-e]] [--verbose|-v] [--program|-p] [--numeric|-n] [--numeric-hosts][--numeric-ports][--numeric-ports] [--continuous|-c] [delay] netstat {--groups|-g} [--numeric|-n] [--numeric-hosts][--numeric-ports][--numeric-ports] [--continuous|-c] [delay] netstat {--masquerade|-M} [--extend|-e] [--numeric|-n] [--numeric-hosts][--numeric-ports][--numeric-ports] [--continuous|-c] [delay] netstat {--statistics|-s} [--tcp|-t] [--udp|-u] [--raw|-w] [delay] netstat {--version|-V} netstat {--help|-h} address_family_options:

    [--protocol={inet,unix,ipx,ax25,netrom,ddp}[,...]] [--unix|-x] [--inet|--ip] [--ax25] [--ipx] [--netrom] [--ddp]

     

    DESCRIPTION

    Netstat prints information about the Linux networking subsystem. The type of information printed is controlled by the first argument, as follows:  

    (none)

    By default, netstat displays a list of open sockets. If you don't specify any address families, then the active sockets of all configured address families will be printed.  

    --route , -r

    Display the kernel routing tables.  

    --groups , -g

    Display multicast group membership information for IPv4 and IPv6.  

    --interface=iface , -i

    Display a table of all network interfaces, or the specified iface).  

    --masquerade , -M

    Display a list of masqueraded connections.  

    --statistics , -s

    Display summary statistics for each protocol.  

    OPTIONS

     

    --verbose , -v

    Tell the user what is going on by being verbose. Especially print some useful information about unconfigured address families.  

    --numeric , -n

    Show numerical addresses instead of trying to determine symbolic host, port or user names.  

    --numeric-hosts

    shows numerical host addresses but does not affect the resolution of port or user names.  

    --numeric-ports

    shows numerical port numbers but does not affect the resolution of host or user names.  

    --numeric-users

    shows numerical user IDs but does not affect the resolution of host or port names.

     

    --protocol=family , -A

    Specifies the address families (perhaps better described as low level protocols) for which connections are to be shown. family is a comma (',') separated list of address family keywords like inet, unix, ipx, ax25, netrom, and ddp. This has the same effect as using the --inet, --unix (-x), --ipx, --ax25, --netrom, and --ddp options. The address family inet includes raw, udp and tcp protocol sockets.  

    -c, --continuous

    This will cause netstat to print the selected information every second continuously.  

    -e, --extend

    Display additional information. Use this option twice for maximum detail.  

    -o, --timers

    Include information related to networking timers.  

    -p, --program

    Show the PID and name of the program to which each socket belongs.  

    -l, --listening

    Show only listening sockets. (These are omitted by default.)  

    -a, --all

    Show both listening and non-listening sockets. With the --interfaces option, show interfaces that are not marked  

    -F

    Print routing information from the FIB. (This is the default.)  

    -C

    Print routing information from the route cache.  

    -Z --context

    If SELinux enabled print SELinux context.  

    -T --notrim

    Stop trimming long addresses.  

    delay

    Netstat will cycle printing through statistics every delay seconds. UP.  

    OUTPUT

     

    Active Internet connections (TCP, UDP, raw)

     

    Proto

    The protocol (tcp, udp, raw) used by the socket.  

    Recv-Q

    The count of bytes not copied by the user program connected to this socket.  

    Send-Q

    The count of bytes not acknowledged by the remote host.  

    Local Address

    Address and port number of the local end of the socket. Unless the --numeric (-n) option is specified, the socket address is resolved to its canonical host name (FQDN), and the port number is translated into the corresponding service name.  

    Foreign Address

    Address and port number of the remote end of the socket. Analogous to "Local Address."  

    State

    The state of the socket. Since there are no states in raw mode and usually no states used in UDP, this column may be left blank. Normally this can be one of several values:
    ESTABLISHED
    The socket has an established connection.
    SYN_SENT
    The socket is actively attempting to establish a connection.
    SYN_RECV
    A connection request has been received from the network.
    FIN_WAIT1
    The socket is closed, and the connection is shutting down.
    FIN_WAIT2
    Connection is closed, and the socket is waiting for a shutdown from the remote end.
    TIME_WAIT
    The socket is waiting after close to handle packets still in the network.
    CLOSED
    The socket is not being used.
    CLOSE_WAIT
    The remote end has shut down, waiting for the socket to close.
    LAST_ACK
    The remote end has shut down, and the socket is closed. Waiting for acknowledgement.
    LISTEN
    The socket is listening for incoming connections. Such sockets are not included in the output unless you specify the --listening (-l) or --all (-a) option.
    CLOSING
    Both sockets are shut down but we still don't have all our data sent.
    UNKNOWN
    The state of the socket is unknown.
     

    User

    The username or the user id (UID) of the owner of the socket.  

    PID/Program name

    Slash-separated pair of the process id (PID) and process name of the process that owns the socket. --program causes this column to be included. You will also need superuser privileges to see this information on sockets you don't own. This identification information is not yet available for IPX sockets.  

    Timer

    (this needs to be written)  

    Active UNIX domain Sockets

     

    Proto

    The protocol (usually unix) used by the socket.  

    RefCnt

    The reference count (i.e. attached processes via this socket).  

    Flags

    The flags displayed is SO_ACCEPTON (displayed as ACC), SO_WAITDATA (W) or SO_NOSPACE (N). SO_ACCECPTON is used on unconnected sockets if their corresponding processes are waiting for a connect request. The other flags are not of normal interest.  

    Type

    There are several types of socket access:
    SOCK_DGRAM
    The socket is used in Datagram (connectionless) mode.
    SOCK_STREAM
    This is a stream (connection) socket.
    SOCK_RAW
    The socket is used as a raw socket.
    SOCK_RDM
    This one serves reliably-delivered messages.
    SOCK_SEQPACKET
    This is a sequential packet socket.
    SOCK_PACKET
    Raw interface access socket.
    UNKNOWN
    Who ever knows what the future will bring us - just fill in here :-)

     

    State

    This field will contain one of the following Keywords:
    FREE
    The socket is not allocated
    LISTENING
    The socket is listening for a connection request. Such sockets are only included in the output if you specify the --listening (-l) or --all (-a) option.
    CONNECTING
    The socket is about to establish a connection.
    CONNECTED
    The socket is connected.
    DISCONNECTING
    The socket is disconnecting.
    (empty)
    The socket is not connected to another one.
    UNKNOWN
    This state should never happen.
     

    PID/Program name

    Process ID (PID) and process name of the process that has the socket open. More info available in Active Internet connections section written above.  

    Path

    This is the path name as which the corresponding processes attached to the socket.  

    Active IPX sockets

    (this needs to be done by somebody who knows it)  

    Active NET/ROM sockets

    (this needs to be done by somebody who knows it)  

    Active AX.25 sockets

    (this needs to be done by somebody who knows it)

     

    NOTES

    Starting with Linux release 2.2 netstat -i does not show interface statistics for alias interfaces. To get per alias interface counters you need to setup explicit rules using the ipchains(8) command.

     

    FILES

    /etc/services -- The services translation file

    /proc -- Mount point for the proc filesystem, which gives access to kernel status information via the following files.

    /proc/net/dev -- device information

    /proc/net/raw -- raw socket information

    /proc/net/tcp -- TCP socket information

    /proc/net/udp -- UDP socket information

    /proc/net/igmp -- IGMP multicast information

    /proc/net/unix -- Unix domain socket information

    /proc/net/ipx -- IPX socket information

    /proc/net/ax25 -- AX25 socket information

    /proc/net/appletalk -- DDP (appletalk) socket information

    /proc/net/nr -- NET/ROM socket information

    /proc/net/route -- IP routing information

    /proc/net/ax25_route -- AX25 routing information

    /proc/net/ipx_route -- IPX routing information

    /proc/net/nr_nodes -- NET/ROM nodelist

    /proc/net/nr_neigh -- NET/ROM neighbours

    /proc/net/ip_masquerade -- masqueraded connections

    /proc/net/snmp -- statistics  

    SEE ALSO

    route(8), ifconfig(8), ipchains(8), iptables(8), proc(5)  

    BUGS

    Occasionally strange information may appear if a socket changes as it is viewed. This is unlikely to occur.  

    AUTHORS

    The netstat user interface was written by Fred Baumgarten <[email protected]> the man page basically by Matt Welsh <[email protected]>. It was updated by Alan Cox <[email protected]> but could do with a bit more work. It was updated again by Tuan Hoang <[email protected]>.
    The man page and the command included in the net-tools package is totally rewritten by Bernd Eckenfels <[email protected]>.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    (none)
    --route , -r
    --groups , -g
    --interface=iface , -i
    --masquerade , -M
    --statistics , -s
    OPTIONS
    --verbose , -v
    --numeric , -n
    --numeric-hosts
    --numeric-ports
    --numeric-users
    --protocol=family , -A
    -c, --continuous
    -e, --extend
    -o, --timers
    -p, --program
    -l, --listening
    -a, --all
    -F
    -C
    -Z --context
    -T --notrim
    delay
    OUTPUT
    Active Internet connections (TCP, UDP, raw)
    Proto
    Recv-Q
    Send-Q
    Local Address
    Foreign Address
    State
    User
    PID/Program name
    Timer
    Active UNIX domain Sockets
    Proto
    RefCnt
    Flags
    Type
    State
    PID/Program name
    Path
    Active IPX sockets
    Active NET/ROM sockets
    Active AX.25 sockets
    NOTES
    FILES
    SEE ALSO
    BUGS
    AUTHORS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру