The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

ng_lmi (4)
  • >> ng_lmi (4) ( FreeBSD man: Специальные файлы /dev/* )

  • BSD mandoc
     

    NAME

    
    
    ng_lmi
    
     - frame relay LMI protocol netgraph node type
    
     
    

    SYNOPSIS

       #include <sys/types.h>
       #include <netgraph/ng_lmi.h>
     

    DESCRIPTION

    The lmi node type performs the frame relay LMI protocol. It supports the ITU Annex A, ANSI Annex D, and Group-of-four LMI types. It also supports auto-detection of the LMI type.

    To enable a specific LMI type, connect the corresponding hook ( annexA annexD or group4 ) to DLCI 0 or 1023 of a ng_frame_relay4 node. Typically, Annex A and Annex D live on DLCI 0 while Group-of-four lives on DLCI 1023.

    To enable LMI type auto-detection, connect the auto0 hook to DLCI 0 and the auto1023 hook to DLCI 1023. The node will attempt to automatically determine which LMI type is running at the switch, and go into that mode.

    Only one fixed LMI type, or auto-detection, can be active at any given time.

    The NGM_LMI_GET_STATUS control message can be used at any time to query the current status of the LMI protocol and each DLCI channel. This node also supports the NGM_TEXT_STATUS control message.  

    HOOKS

    This node type supports the following hooks:

    annexA
    ITU Annex A LMI hook.
    annexD
    ANSI Annex D LMI hook.
    group4
    Group-of-four LMI hook.
    auto0
    Auto-detection hook for DLCI 0.
    auto1023
    Auto-detection hook for DLCI 1023.

     

    CONTROL MESSAGES

    This node type supports the generic control messages, plus the following:

    NGM_LMI_GET_STATUS
    This command returns status information in a struct nglmistat
    #define NGM_LMI_STAT_ARYSIZE   (1024/8)
    
    struct nglmistat {
      u_char  proto[12];    /* Active proto (same as hook name) */
      u_char  hook[12];     /* Active hook */
      u_char  fixed;        /* If set to fixed LMI mode */
      u_char  autod;        /* If currently auto-detecting */
      u_char  seen[NGM_LMI_STAT_ARYSIZE];   /* bitmap DLCIs seen */
      u_char  up[NGM_LMI_STAT_ARYSIZE];     /* bitmap DLCIs up */
    };
    
    NGM_TEXT_STATUS
    This generic message returns is a human-readable version of the node status.

     

    SHUTDOWN

    This node shuts down upon receipt of a NGM_SHUTDOWN control message, or when all hooks have been disconnected.  

    SEE ALSO

    netgraph(4), ng_frame_relay4, ngctl(8)
    "ANSI T1.617-1991 Annex D"
    "ITU-T Q.933 Digital Subscriber Signaling System No. 1 - Signaling Specification for Frame Mode Basic Call Control, Annex A"
     

    HISTORY

    The node type was implemented in Fx 4.0 .  

    AUTHORS

    An Julian Elischer Aq [email protected]


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    HOOKS
    CONTROL MESSAGES
    SHUTDOWN
    SEE ALSO
    HISTORY
    AUTHORS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру