The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

nslint (8)
  • >> nslint (8) ( Linux man: Команды системного администрирования )
  •  

    NAME

    nslint - perform consistency checks on dns files
     
    

    SYNOPSIS

    nslint [ -d ] [ -b named.boot ] [ -B nslint.boot ]
    nslint [ -d ] [ -c named.conf ] [ -C nslint.conf ]  

    DESCRIPTION

    Nslint reads the nameserver configuration files and performs a number of consistency checks on the dns records. If any problems are discovered, error messages are displayed on stderr and nslint exits with a non-zero status.

    Here is a short list of errors nslint detects:

    Records that are malformed.
    Names that contain dots but are missing a trailing dot.
    PTR records with names that are missing a trailing dot.
    Names that contain illegal characters (rfc1034).
    A records without matching PTR records
    PTR records without matching A records
    Names with more than one address on the same subnet.
    Addresses in use by more than one name.
    Names with CNAME and other records (rfc1033).
    Unknown service and/or protocol keywords in WKS records.
    Missing quotes.

     

    OPTIONS

    -b
    Specify an alternate named.boot file. The default is /etc/named.boot.
    -c
    Specify an alternate named.conf file. The default is /etc/named.conf.
    -B
    Specify an alternate nslint.boot file. The default is nslint.boot in the last directory line processed in named.boot (or the current working directory). This file is processed like a second named.boot. The most common use is to tell nslint about A records that match PTR records that point outside the domains listed in named.boot.
    -C
    Specify an alternate nslint.conf file. The default is nslint.conf in the last directory line processed in named.conf (or the current working directory). This file is processed like a second named.conf.
    -d
    Raise the debugging level. Debugging information is displayed on stdout.

    Nslint knows how to read old style named.boot and BIND 8's new named.conf files. If both files exist, nslint will prefer named.conf (on the theory that you forgot to delete named.boot when you upgraded to BIND 8).

     

    ADVANCED CONFIGURATION

    There are some cases where it is necessary to use the advanced configuration features of nslint. Advanced configuration is done with the nslint.boot file.

    The most common is when a site has a demilitarized zone (DMZ). The problem here is that the DMZ network will have PTR records for hosts outside its domain. For example lets say we have 128.0.rev with:

    
    1.1     604800  in      ptr     gateway.lbl.gov.
    2.1     604800  in      ptr     gateway.es.net.
    
    

    Obviously we will define an A record for gateway.lbl.gov pointing to 128.0.1.1 but we will get errors because there is no A record defined for gateway.es.net. The solution is to create a nslint.boot file (in the same directory as the other dns files) with:

    
    primary es.net                  nslint.es.net
    
    

    And then create the file nslint.es.net with:

    
    gateway 1       in      a       128.0.1.2
    
    

    Another problem occurs when there is a CNAME that points to a host outside the local domains. Let's say we have info.lbl.gov pointing to larry.es.net:

    
    info    604800  in      cname   larry.es.net.
    
    

    In this case we would need:

    
    primary es.net                  nslint.es.net
    
    

    in nslint.boot and:

    
    larry   1       in      txt     "place holder"
    
    

    nslint.es.net.

    One last problem when a pseudo host is setup to allow two more more actual hosts provide a service. For, let's say that lbl.gov contains:

    
    server  604800  in      a       128.0.6.6
    server  604800  in      a       128.0.6.94
    ;
    tom     604800  in      a       128.0.6.6
    tom     604800  in      mx 0    lbl.gov.
    ;
    jerry   604800  in      a       128.0.6.94
    jerry   604800  in      mx 0    lbl.gov.
    
    

    In this case nslint would complain about missing PTR records and ip addresses in use by more than one host. To suppress these warnings, add you would the lines:

    
    primary lbl.gov                 nslint.lbl.gov
    primary 0.128.in-addr.arpa      nslint.128.0.rev
    
    

    to nslint.boot and create nslint.lbl.gov with:

    
    server  1       in      allowdupa       128.0.6.6
    server  1       in      allowdupa       128.0.6.94
    
    

    and create nslint.128.0.rev with:

    
    6.6     604800  in      ptr     server.lbl.gov.
    94.6    604800  in      ptr     server.lbl.gov.
    
    

    In this example, the allowdupa keyword tells nslint that it's ok for 128.0.6.6 and 128.0.6.94 to be shared by server.lbl.gov, tom.lbl.gov, and jerry.lbl.gov.

    One last nslint feature helps detect hosts that have mistakenly had two ip addresses assigned on the same subnet. This can happen when two different people request an ip address for the same hostname or when someone forgets an address has been assigned and requests a new number.

    To detect such A records, add a nslint section to your nslint.conf containing something similar to:

    
    nslint {
    
    network "128.0.6/22"; network "128.0.6 255.255.252.0";
    };

    The two network lines in this example are equivalent ways of saying the same thing; that subnet 128.0.6 has a 22 bit wide subnet mask.

    If you are using nslint.boot, the syntax would be:

    
    network 128.0.6/22
    network 128.0.6 255.255.252.0
    
    

    Again this shows two ways of saying the same thing.

    Using information from the above network statement, nslint would would flag the following A records as being in error:

    
    server  1       in      a       128.0.6.48
    server  1       in      a       128.0.7.16
    
    

    Note that if you specify any network lines in your nslint.conf or nslint.boot files, nslint requires you to include lines for all networks; otherwise you might forget to add network lines for new networks.

     

    FILES

    /etc/named.boot - default named configuration file
    nslint.boot - default nslint configuration file
    

     

    SEE ALSO

    named(8), rfc1033, rfc1034  

    AUTHOR

    Craig Leres of the Lawrence Berkeley National Laboratory, University of California, Berkeley, CA.

    The current version is available via anonymous ftp:

    ftp://ftp.ee.lbl.gov/nslint.tar.gz
     

    BUGS

    Please send bug reports to [email protected].

    Not everyone is guaranteed to agree with all the checks done.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    OPTIONS
    ADVANCED CONFIGURATION
    FILES
    SEE ALSO
    AUTHOR
    BUGS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру