The OpenNET Project / Index page

[ ÎÏ×ÏÓÔÉ /+++ | ÆÏÒÕÍ | ÔÅÇÉ | ]

éÎÔÅÒÁËÔÉ×ÎÁÑ ÓÉÓÔÅÍÁ ÐÒÏÓÍÏÔÒÁ ÓÉÓÔÅÍÎÙÈ ÒÕËÏ×ÏÄÓÔ× (man-Ï×)

 ôÅÍÁîÁÂÏÒëÁÔÅÇÏÒÉÑ 
 
 [CÐÉÓÏË ÒÕËÏ×ÏÄÓÔ× | ðÅÞÁÔØ]

ntlm_auth (1)
  • >> ntlm_auth (1) ( Linux man: ëÏÍÁÎÄÙ É ÐÒÉËÌÁÄÎÙÅ ÐÒÏÇÒÁÍÍÙ ÐÏÌØÚÏ×ÁÔÅÌØÓËÏÇÏ ÕÒÏ×ÎÑ )
  •  

    NAME

    ntlm_auth - tool to allow external access to Winbind's NTLM authentication function
     
    

    SYNOPSIS

    ntlm_auth [-d debuglevel] [-l logdir] [-s <smb config file>]
     

    DESCRIPTION

    This tool is part of the samba(7) suite.

    ntlm_auth is a helper utility that authenticates users using NT/LM authentication. It returns 0 if the users is authenticated successfully and 1 if access was denied. ntlm_auth uses winbind to access the user and authentication data for a domain. This utility is only indended to be used by other programs (currently Squid and mod_ntlm_winbind)  

    OPERATIONAL REQUIREMENTS

    The winbindd(8) daemon must be operational for many of these commands to function.

    Some of these commands also require access to the directory winbindd_privileged in $LOCKDIR. This should be done either by running this command as root or providing group access to the winbindd_privileged directory. For security reasons, this directory should not be world-accessable.  

    OPTIONS

    --helper-protocol=PROTO

    Operate as a stdio-based helper. Valid helper protocols are:

    squid-2.4-basic

    Server-side helper for use with Squid 2.4's basic (plaintext) authentication.

    squid-2.5-basic

    Server-side helper for use with Squid 2.5's basic (plaintext) authentication.

    squid-2.5-ntlmssp

    Server-side helper for use with Squid 2.5's NTLMSSP authentication.

    Requires access to the directory winbindd_privileged in $LOCKDIR. The protocol used is described here: http://devel.squid-cache.org/ntlm/squid_helper_protocol.html. This protocol has been extended to allow the NTLMSSP Negotiate packet to be included as an argument to the YR command. (Thus avoiding loss of information in the protocol exchange).

    ntlmssp-client-1

    Client-side helper for use with arbitary external programs that may wish to use Samba's NTLMSSP authentication knowlege.

    This helper is a client, and as such may be run by any user. The protocol used is effectivly the reverse of the previous protocol. A YR command (without any arguments) starts the authentication exchange.

    gss-spnego

    Server-side helper that implements GSS-SPNEGO. This uses a protocol that is almost the same as squid-2.5-ntlmssp, but has some subtle differences that are undocumented outside the source at this stage.

    Requires access to the directory winbindd_privileged in $LOCKDIR.

    gss-spnego-client

    Client-side helper that implements GSS-SPNEGO. This also uses a protocol similar to the above helpers, but is currently undocumented.

    ntlm-server-1

    Server-side helper protocol, intended for use by a RADIUS server or the 'winbind' plugin for pppd, for the provision of MSCHAP and MSCHAPv2 authentication.

    This protocol consists of lines in for form: Parameter: value and Paramter:: Base64-encode value. The presence of a single period indicates that one side has finished supplying data to the other. (Which in turn could cause the helper to authenticate the user).

    Curently implemented parameters from the external program to the helper are:

    Username

    The username, expected to be in Samba's unix charset.

    Example 1. Username: bob

    Example 2. Username:: Ym9i

    Username

    The user's domain, expected to be in Samba's unix charset.

    Example 3. Domain: WORKGROUP

    Example 4. Domain:: V09SS0dST1VQ

    Full-Username

    The fully qualified username, expected to be in Samba's

    and qualified with the winbind separator.

    Example 5. Full-Username: WORKGROUPmly by the server, or (in cases such as MSCHAPv2) generated in some way by both the server and the client.

    Example 7. LANMAN-Challege: 0102030405060708

    LANMAN-Response

    The 24 byte LANMAN Response value, calculated from the user's password and the supplied LANMAN Challenge. Typically, this is provided over the network by a client wishing to authenticate.

    Example 8. LANMAN-Response: 0102030405060708090A0B0C0D0E0F101112131415161718

    NT-Response

    The >= 24 byte NT Response calculated from the user's password and the supplied LANMAN Challenge. Typically, this is provided over the network by a client wishing to authenticate.

    Example 9. NT-Response: 0102030405060708090A0B0C0D0E0F101112131415161718

    Password

    The user's password. This would be provided by a network client, if the helper is being used in a legacy situation that exposes plaintext passwords in this way.

    Example 10. Password: samba2

    Example 11. Password:: c2FtYmEy

    Request-User-Session-Key

    Apon sucessful authenticaiton, return the user session key associated with the login.

    Example 12. Request-User-Session-Key: Yes

    Request-LanMan-Session-Key

    Apon sucessful authenticaiton, return the LANMAN session key associated with the login.

    Example 13. Request-LanMan-Session-Key: Yes


    Warning Implementors should take care to base64 encode                 any data (such as usernames/passwords) that may contain malicous user data, such as
                    a newline. They may also need to decode strings from
                    the helper, which likewise may have been base64 encoded.

    --username=USERNAME

    Specify username of user to authenticate

    --domain=DOMAIN

    Specify domain of user to authenticate

    --workstation=WORKSTATION

    Specify the workstation the user authenticated from

    --challenge=STRING

    NTLM challenge (in HEXADECIMAL)

    --lm-response=RESPONSE

    LM Response to the challenge (in HEXADECIMAL)

    --nt-response=RESPONSE

    NT or NTLMv2 Response to the challenge (in HEXADECIMAL)

    --password=PASSWORD

    User's plaintext password

    If not specified on the command line, this is prompted for when required.

    For the NTLMSSP based server roles, this paramter specifies the expected password, allowing testing without winbindd operational.

    --request-lm-key

    Retreive LM session key

    --request-nt-key

    Request NT key

    --diagnostics

    Perform Diagnostics on the authentication chain. Uses the password from --password or prompts for one.

    --require-membership-of={SID|Name}

    Require that a user be a member of specified group (either name or SID) for authentication to succeed.

    -V

    Prints the program version number.

    -s <configuration file>

    The file specified contains the configuration details required by the server. The information in this file includes server-specific information such as what printcap file to use, as well as descriptions of all the services that the server is to provide. See smb.conf for more information. The default configuration file name is determined at compile time.

    -d|--debuglevel=level

    level is an integer from 0 to 10. The default value if this parameter is not specified is zero.

    The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for day-to-day running - it generates a small amount of information about operations carried out.

    Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.

    Note that specifying this parameter here will override the

    parameter in the smb.conf file.

    -l|--logfile=logdirectory

    Base directory name for log/debug files. The extension ".progname" will be appended (e.g. log.smbclient, log.smbd, etc...). The log file is never removed by the client.

    -h|--help

    Print a summary of command line options.
     

    EXAMPLE SETUP

    To setup ntlm_auth for use by squid 2.5, with both basic and NTLMSSP authentication, the following should be placed in the squid.conf file.

    
    auth_param ntlm program ntlm_auth --helper-protocol=squid-2.5-ntlmssp
    auth_param basic program ntlm_auth --helper-protocol=squid-2.5-basic
    auth_param basic children 5
    auth_param basic realm Squid proxy-caching web server
    auth_param basic credentialsttl 2 hours
    
    


    Note

    This example assumes that ntlm_auth has been installed into your path, and that the group permissions on winbindd_privileged are as described above.

    To setup ntlm_auth for use by squid 2.5 with group limitation in addition to the above example, the following should be added to the squid.conf file.

    
    auth_param ntlm program ntlm_auth --helper-protocol=squid-2.5-ntlmssp --require-membership-of='WORKGROUPDomain Users'
    auth_param basic program ntlm_auth --helper-protocol=squid-2.5-basic --require-membership-of='WORKGROUPDomain Users'
    
    

     

    TROUBLESHOOTING

    If you're experiencing problems with authenticating Internet Explorer running under MS Windows 9X or Millenium Edition against ntlm_auth's NTLMSSP authentication helper (--helper-protocol=squid-2.5-ntlmssp), then please read the Microsoft Knowledge Base article #239869 and follow instructions described there.  

    VERSION

    This man page is correct for version 3.0 of the Samba suite.  

    AUTHOR

    The original Samba software and related utilities were created by Andrew Tridgell. Samba is now developed by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.

    The ntlm_auth manpage was written by Jelmer Vernooij and Andrew Bartlett.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    OPERATIONAL REQUIREMENTS
    OPTIONS
    EXAMPLE SETUP
    TROUBLESHOOTING
    VERSION
    AUTHOR


    ðÏÉÓË ÐÏ ÔÅËÓÔÕ MAN-Ï×: 




    ðÁÒÔΣÒÙ:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    èÏÓÔÉÎÇ:

    úÁËÌÁÄËÉ ÎÁ ÓÁÊÔÅ
    ðÒÏÓÌÅÄÉÔØ ÚÁ ÓÔÒÁÎÉÃÅÊ
    Created 1996-2024 by Maxim Chirkov
    äÏÂÁ×ÉÔØ, ðÏÄÄÅÒÖÁÔØ, ÷ÅÂÍÁÓÔÅÒÕ