The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

ogg123 (1)
  • >> ogg123 (1) ( Linux man: Команды и прикладные программы пользовательского уровня )
  •  

    NAME

    ogg123 - plays Ogg Vorbis files
    

     

    SYNOPSIS

    ogg123 [ -vqzVh ] [ -k seconds ] [ -x nth ] [ -y ntimes ] [ -b buffer_size ] [ -d driver [ -o option:value ] [ -f filename ] ] file ... | directory ... | URL ...

     

    DESCRIPTION

    ogg123 reads Ogg Vorbis audio files and decodes them to the devices specified on the command line. By default, ogg123 writes to the standard sound device, but output can be sent to any number of devices. Files can be read from the file system, or URLs can be streamed via HTTP. If a directory is given, all of the files in it or its subdirectories will be played.

     

    OPTIONS

    --audio-buffer n
    Use an output audio buffer of approximately 'n' kilobytes.
    -@ playlist, --list playlist
    Play all of the files named in the file 'playlist'. The playlist should have one filename, directory name, or URL per line. Blank lines are permitted. Directories will be treated in the same way as on the command line.
    -b n, --buffer n
    Use an input buffer of approximately 'n' kilobytes.
    -p n, --prebuffer n
    Prebuffer 'n' percent of the input buffer. Playback won't begin until this prebuffer is complete.
    -d device, --device device
    Specify output device. See DEVICES section for a list of devices. Any number of devices may be specified.
    -f filename, --file filename
    Specify output file for file devices. The filename "-" writes to standard out. If the file already exists, ogg123 will overwrite it.
    -h, --help
    Show command help.
    -k n, --skip n
    Skip the first 'n' seconds. 'n' may also be in minutes:seconds or hours:minutes:seconds form.
    -K n, --end n
    Stops playing 'n' seconds from the start of the stream. 'n' may also have the same format as used in the --skip option.
    -o option:value, --device-option option:value
    Assigns the option option to value for the preceding device. See DEVICES for a list of valid options for each device.
    -q, --quiet
    Quiet mode. No messages are displayed.
    -V, --version
    Display version information.
    -v, --verbose
    Increase verbosity.
    -x n, --nth
    Play every 'n'th decoded block. Has the effect of playing audio at 'n' times faster than normal speed.
    -y n, --ntimes
    Repeat every played block 'n' times. Has the effect of playing audio 'n' times slower than normal speed. May be with -x for interesting fractional speeds.
    -z, --shuffle
    Play files in pseudo-random order.

     

    DEVICES

    ogg123 supports a variety of audio output devices through libao. Only those devices supported by the target platform will be available. The -f option may only be used with devices that write to files.

    null
    Null driver. All audio data is discarded. (Note: Audio data is not written to /dev/null !) You could use this driver to test raw decoding speed without output overhead.

    oss
    Open Sound System driver for Linux and FreeBSD.
    Options:
    dsp
    DSP device for soundcard. Defaults to /dev/dsp.

    sun
    Sun Audio driver for NetBSD, OpenBSD, and Solaris.
    Options:
    dev
    Audio device for soundcard. Defaults to /dev/audio.

    alsa09
    Advanced Linux Sound Architecture.
    Options:
    card
    Sound card number. (Default = 0)
    dev
    Device number on the sound card. (Default = 0)
    buf_size
    Override the default buffer size (in bytes).

    irix
    IRIX audio driver.

    arts
    aRts Sound Daemon.

    esd
    Enlightened Sound Daemon.
    Options:
    host
    The hostname where esd is running. This can include a port number after a colon, as in "whizbang.com:555". (Default = localhost)

    au
    Sun audio file output. Writes the audio samples in AU format. The AU format supports writing to unseekable files, like standard out. In such circumstances, the AU header will specify the sample format, but not the length of the recording.

    raw
    Raw sample output. Writes raw audio samples to a file.
    Options:
    byteorder
    Choose big endian, little endian, or native byte order. (Default = "native")

    wav
    WAV file output. Writes the sound data to disk in uncompressed form. If multiple files are played, all of them will be concatenated into the same WAV file. WAV files cannot be written to unseekable files, such as standard out. Use the AU format instead.

     

    EXAMPLES

    The ogg123 command line is fairly flexible, perhaps confusingly so. Here are some sample command lines and an explanation of what they do.

    Play on the default soundcard:

    ogg123 test.ogg

    Play all of the files in the directory ~/music and its subdirectories.

    ogg123 ~/music

    Play a file using the OSS driver:

    ogg123 -d oss test.ogg

    Pass the "dsp" option to the OSS driver:

    ogg123 -d oss -o dsp:/dev/mydsp

    Use the ESD driver

    ogg123 -d esd test.ogg

    Use the WAV driver with the output file, "test.wav":

    ogg123 -d wav -f test.wav test.ogg

    Listen to a file while you write it to a WAV file:

    ogg123 -d oss -d wav -f test.wav test.ogg

    Note that options apply to the device declared to the left:

    ogg123 -d oss -o dsp:/dev/mydsp -d raw -f test2.raw -o byteorder:big test.ogg

    Stress test your hard drive:

    ogg123 -d oss -d wav -f 1.wav -d wav -f 2.wav -d wav -f 3.wav -d wav -f 4.wav -d wav -f 5.wav test.ogg

    Create an echo effect with esd and a slow computer:

    ogg123 -d esd -d esd test.ogg

     

    INTERRUPT

    You can abort ogg123 at any time by pressing Ctrl-C. If you are playing multiple files, this will stop the current file and begin playing the next one. If you want to abort playing immediately instead of skipping to the next file, press Ctrl-C within the first second of the playback of a new file. Note that the result of pressing Ctrl-C might not be audible immediately, due to audio data buffering in the audio device. This delay is system dependent, but it is usually not more than one or two seconds.

     

    FILES

    /etc/libao.conf
    Can be used to set the default output device for all libao programs.

    ~/.libao
    Per-user config file to override the system wide output device settings.

     

    BUGS

    Piped WAV files may cause strange behavior in other programs. This is because WAV files store the data length in the header. However, the output driver does not know the length when it writes the header, and there is no value that means "length unknown". Use the raw or au output driver if you need to use ogg123 in a pipe.

     

    SEE ALSO

    libao.conf(5)

     

    AUTHORS

    Program Authors:

    Kenneth Arnold <[email protected]>
    Stan Seibert <[email protected]>

    Manpage Author:

    Stan Seibert <[email protected]>


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    OPTIONS
    DEVICES
    EXAMPLES
    INTERRUPT
    FILES
    BUGS
    SEE ALSO
    AUTHORS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру