The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

openipmicmd (1)
  • >> openipmicmd (1) ( Linux man: Команды и прикладные программы пользовательского уровня )
  •  

    NAME

    openipmicmd - An IPMI Command Interface
    

     

    SYNOPSIS

    openipmicmd [-k entry-to-execute] <connection parms>

     

    DESCRIPTION

    The openipmicmd program allows a user to execute direct IPMI commands. It can work with direct interface with the OpenIPMI driver or with IPMI LAN interfaces.

     

    OPTIONS

    -k entry-to-execute
    Execute a single command an exit.

    <connectionparms>
    The parameters for the connection depend on the connection type. These are all described in openipmi_conparms (7)

     

    COMMANDS

    Once up, you can execute commands in the user interface. Note that commands and responses are asynchronous, you issue a command and the interface returns immediately. When the response comes back, it will be dumped on your console. That's a little strange looking, but IPMI is ansychronous underneath. Note that the -k option is synchronous, it will wait for the response or a timeout before returning.

    0f lun netfn cmd [data1 [data2 ...]]
    Send a command to the BMC you are connected to.

    channel [ipmb] IPMB-addr lun netfn cmd [data1 [data2 ...]]
    Send a command to a device on the IPMB bus. The "ipmb" string is optional.

    channel 00 IPMB-addr lun netfn cmd [data1 [data2 ...]]
    Send a broadcast command to a device on the IPMB bus.

    channel lan handle remote-swid local-swid lun netfn cmd [data1 [data ...]]
    Send a command to a device over a LAN channel. Note that this not the same as a LAN connection. This sends a message through a local BMC to a remote system that is hooked up with a LAN connection.

    test_lat count command
    Executes the given commands (one of the previous commands) count times and gives the average time per command to execute. Note that "count" is hexadecimal.

    help
    Display some help.

    regcmd netfn cmd
    Register to receive the given command. If the driver receives an external command, it will print it out. This only works with system interface connections, it will not work on LAN connections.

    unregcmd netfn cmd
    Remove a command registration.

     

    SEE ALSO

    ipmi_ui(1), ipmilan(8), openipmi_conparms(7)

     

    KNOWN PROBLEMS

    The asychronous nature of the program can be annoying.

     

    AUTHOR

    Corey Minyard <[email protected]>


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    OPTIONS
    COMMANDS
    SEE ALSO
    KNOWN PROBLEMS
    AUTHOR


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру