The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

pam_krb5 (8)
  • pam_krb5 (5) ( Solaris man: Форматы файлов )
  • pam_krb5 (5) ( Linux man: Форматы файлов )
  • pam_krb5 (8) ( FreeBSD man: Команды системного администрирования )
  • >> pam_krb5 (8) ( Linux man: Команды системного администрирования )
  •  

    NAME

    pam_krb5 - Kerberos 5 authentication
    

     

    SYNOPSIS

    auth required /$LIB/security/pam_krb5.so
    session optional /$LIB/security/pam_krb5.so
    account sufficient /$LIB/security/pam_krb5.so
    password sufficient /$LIB/security/pam_krb5.so

     

    DESCRIPTION

    The pam_krb5.so module is designed to allow smooth integration of Kerberos 5 password-checking for applications which use PAM. It creates session-specific credential cache files, and can obtain Kerberos IV credentials using a krb524 service. If the system is an AFS client, it will also attempt to obtain tokens for the local cell, the cell which contains the user's home directory, and any explicitly-configured cells.

    When a user logs in, the module's authentication function performs a simple password check and, if possible, obtains Kerberos 5 and Kerberos IV credentials, caching them for later use. When the application requests initialization of credentials (or opens a session), the usual ticket files are created. When the application subsequently requests deletion of credentials or closing of the session, the module deletes the ticket files. When the application requests account management, if the module did not participate in authenticating the user, it will signal libpam to ignore the module. If the module did participate in authenticating the user, it will check for an expired user password and verify the user's authorization using the .k5login file of the user being authenticated, which is expected to be accessible to the module.

     

    ARGUMENTS

    debug
    turns on debugging via syslog(3). Debugging messages are logged with priority LOG_DEBUG.

    debug_sensitive
    turns on debugging of sensitive information via syslog(3). Debug messages are logged with priority LOG_DEBUG.

    addressless
    tells pam_krb5.so to obtain credentials without address lists. This may be necessary if your network uses NAT, and should otherwise not be used. This option is deprecated in favor of the noaddresses flag in the libdefaults section of krb5.conf(5).

    hosts=host
    tells pam_krb5.so to obtain credentials using the address of the given host in addition to the addresses of interfaces on the local workstation. For example, if your workstation is behind a masquerading firewall, specifying the firewall's outward-facing address here should allow Kerberos authentication to succeed. This option is deprecated in favor of the extra_addresses flag in the libdefaults section of krb5.conf(5).

    afs_cells=cell1.example.com cell2.example.com
    tells pam_krb5.so to obtain tokens for cell1.example.com and cell2.example.com, in addition to the local cell, for the user. in addition to the local cell, for the user. The module will guess the principal name of the AFS service for the named cells, or it can be specified by giving cells in the form cellname=principalname.

    banner=Kerberos 5
    tells pam_krb5.so how to identify itself when users attempt to change their passwords. The default setting is "Kerberos 5".

    ccache_dir=/tmp
    tells pam_krb5.so which directory to use for storing credential caches. The default setting is /tmp.

    existing_ticket
    tells pam_krb5.so to accept the presence of pre-existing Kerberos credentials provided by the calling application in the default credential cache as sufficient to authenticate the user, and to skip any account management checks.
    DANGER! Unless validation is also in use, it is relatively easy to produce a credential cache which looks "good enough" to fool pam_krb5.so.

    external
    external=sshd
    tells pam_krb5.so to use Kerberos credentials provided by the calling application during session setup. This is most often useful for obtaining AFS tokens or a krb4 ticket.

    forwardable
    tells pam_krb5.so that credentials it obtains should be forwardable. This option is deprecated in favor of the forwardable option in the libdefaults section of krb5.conf(5).

    ignore_unknown_principals
    ignore_unknown_spn
    ignore_unknown_upn
    specifies that not pam_krb5 should return a PAM_IGNORE code to libpam instead of PAM_USER_UNKNOWN for users for whom the determined principal name is expired or does not exist.

    keytab=FILE:/etc/krb5.keytab
    tells pam_krb5.so the location of a keytab to use when validating credentials obtained from KDCs.

    krb4_convert
    tells pam_krb5.so to obtain Kerberos IV credentials for users, in addition to Kerberos 5 credentials, using either a v4-capable KDC or This option is poorly named. This option is automatically enabled if AFS is detected.

    krb4_convert_524
    tells pam_krb5.so to obtain Kerberos IV credentials for users using the krb524 service. This option modifies the krb4_convert option. If disabled, pam_krb5 will only attempt to obtain Kerberos IV credentials using the KDC.

    krb4_use_as_req
    tells pam_krb5.so to obtain Kerberos IV credentials for users using the KDC. This option modifies the krb4_convert option. If disabled, pam_krb5 will only attempt to obtain Kerberos IV credentials using the krb524 service.

    minimum_uid=0
    tells pam_krb5.so to ignore authentication attempts by users with UIDs below the specified number.

    no_initial_prompt
    tells pam_krb5.so to not ask for a password before attempting authentication, and to instead allow the Kerberos library to trigger a request for a password only in cases where one is needed.

    no_subsequent_prompt
    tells pam_krb5.so to only provide the previously-entered password in response to any request for a password which the Kerberos library might make.

    no_user_check
    tells pam_krb5.so to not check if a user exists on the local system, to skip authorization checks using the user's .k5login file, and to create ccache files owned by the current process's UID. This is useful for situations where a non-privileged server process needs to use Kerberized services on behalf of remote users who may not have local access. Note that such a server should have an encrypted connection with its client in order to avoid allowing the user's password to be eavesdropped.

    proxiable
    tells pam_krb5.so that credentials it obtains should be proxiable. This option is deprecated in favor of the proxiable option in the libdefaults section of krb5.conf(5).

    pwhelp=
    specifies the name of a text file whose contents will be displayed to clients who attempt to change their passwords. There is no default.

    realm=realm
    overrides the default realm set in /etc/krb5.conf, which pam_krb5.so will attempt to authenticate users to.

    renew_lifetime=36000
    sets the default renewable lifetime for credentials. This option is deprecated in favor of the renew_lifetime option in the libdefaults section of krb5.conf(5).

    ticket_lifetime=36000
    sets the default lifetime for credentials.

    tokens
    tokens=imap
    signals that pam_krb5.so should create a new AFS PAG and obtain AFS tokens during authentication in addition to session setup. This is primarily useful in server applications which need to access a user's files but which do not open PAM sessions before doing so.

    try_first_pass
    tells pam_krb5.so to check the previously-entered password as with use_first_pass, but to prompt the user for another one if the previously-entered one fails. This is the default mode of operation.

    use_first_pass
    tells pam_krb5.so to get the user's entered password as it was stored by a module listed earlier in the stack, usually pam_unix or pam_pwdb, instead of prompting the user for it.

    use_authtok
    tells pam_krb5.so to never prompt for new passwords when changing passwords. This is useful if you are using pam_cracklib.so or pam_passwdqc.so to try to enforce use of less-easy-to-guess passwords.

    use_shmem
    use_shmem=sshd
    tells pam_krb5.so to pass credentials from the authentication service function to the session management service function using shared memory, or to do so for specific services.

    validate
    validate=sshd
    tells pam_krb5.so to verify that the TGT obtained from the realm's servers has not been spoofed. Note that the process which is performing authentication must be able to read the keytab in order for validation to be possible.

     

    FILES

    /etc/krb5.conf

     

    SEE ALSO

    pam_krb5(5) krb5.conf(5)

     

    BUGS

    Probably, but let's hope not. If you find any, please file them in the bug database at http://bugzilla.redhat.com/ against the "pam_krb5" component.

     

    AUTHOR

    Nalin Dahyabhai <[email protected]>


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    ARGUMENTS
    FILES
    SEE ALSO
    BUGS
    AUTHOR


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру