The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

pppoe-server (8)
  • pppoe-server (8) ( Русские man: Команды системного администрирования )
  • >> pppoe-server (8) ( Linux man: Команды системного администрирования )
  •  

    NAME

    pppoe-server - user-space PPPoE server
     
    

    SYNOPSIS

    pppoe-server [options]

     

    DESCRIPTION

    pppoe-server is a user-space server for PPPoE (Point-to-Point Protocol over Ethernet) for Linux and other UNIX systems. pppoe-server works in concert with the pppoe client to respond to PPPoE discovery packets and set up PPPoE sessions.

     

    OPTIONS

    -F
    The -F option causes pppoe-server not to fork and become a daemon. The default is to fork and become a daemon.

    -I interface
    The -I option specifies the Ethernet interface to use. Under Linux, it is typically eth0 or eth1. The interface should be "up" before you start pppoe-server, but should not be configured to have an IP address. You can supply multiple -I options if you want the server to respond on more than one interface.

    -T timeout
    This option is passed directly to pppoe; see pppoe(8) for details. If you are using kernel-mode PPPoE, this option has no effect.

    -C ac_name
    Specifies which name to report as the access concentrator name. If not supplied, the host name is used.

    -S name
    Offer a service named name. Multiple -S options may be specified; each one causes the named service to be advertised in a Service-Name tag in the PADO frame. The first -S option specifies the default service, and is used if the PPPoE client requests a Service-Name of length zero.

    -m MSS
    This option is passed directly to pppoe; see pppoe(8) for details. If you are using kernel-mode PPPoE, this option has no effect.

    -s
    This option is passed directly to pppoe; see pppoe(8) for details. In addition, it causes pppd to be invoked with the sync option.

    -L ip
    Sets the local IP address. This is passed to spawned pppd processes. If not specified, the default is 10.0.0.1.

    -R ip
    Sets the starting remote IP address. As sessions are established, IP addresses are assigned starting from ip. pppoe-server automatically keeps track of the pool of addresses and passes a valid remote IP address to pppd. If not specified, a starting address of 10.67.15.1 is used.

    -N num
    Allows at most num concurrent PPPoE sessions. If not specified, the default is 64.

    -p fname
    Reads the specified file fname which is a text file consisting of one IP address per line. These IP addresses will be assigned to clients. The number of sessions allowed will equal the number of addresses found in the file. The -p option overrides both -R and -N.

    In addition to containing IP addresses, the pool file can contain lines of the form:

            a.b.c.d-e
    

    which includes all IP addresses from a.b.c.d to a.b.c.e. For example, the line:

            1.2.3.4-7
    

    is equivalent to:

            1.2.3.4
            1.2.3.5
            1.2.3.6
            1.2.3.7
    

    -r
    Tells the PPPoE server to randomly permute session numbers. Instead of handing out sessions in order, the session numbers are assigned in an unpredictable order.

    -u
    Tells the server to invoke pppd with the unit option. Note that this option only works for pppd version 2.4.0 or newer.

    -o offset
    Instead of numbering PPPoE sessions starting at 1, they will be numbered starting at offset+1. This allows you to run multiple servers on a given machine; just make sure that their session numbers do not overlap.

    -f disc:sess
    The -f option sets the Ethernet frame types for PPPoE discovery and session frames. The types are specified as hexadecimal numbers separated by a colon. Standard PPPoE uses frame types 8863:8864. You should not use this option unless you are absolutely sure the peer you are dealing with uses non-standard frame types.

    -k
    The -k option tells the server to use kernel-mode PPPoE on Linux. This option is available only on Linux kernels 2.4.0 and later, and only if the server was built with kernel-mode support.

    -h
    The -h option prints a brief usage message and exits.

     

    OPERATION

    pppoe-server listens for incoming PPPoE discovery packets. When a session is established, it spawns a pppd process. The following options are passed to pppd:

    nodetach noaccomp nobsdcom nodeflate nopcomp novj novjccomp
    default-asyncmap
    

    In addition, the local and remote IP address are set based on the -L and -R options. The pty option is supplied along with a pppoe command to initiate the PPPoE session. Finally, additional pppd options can be placed in the file /etc/ppp/pppoe-server-options (which must exist, even if it is just empty!)

    Note that pppoe-server is meant mainly for testing PPPoE clients. It is not a high-performance server meant for production use.

     

    AUTHORS

    pppoe-server was written by David F. Skoll <[email protected]>.

    The pppoe home page is http://www.roaringpenguin.com/pppoe/.

     

    SEE ALSO

    adsl-start(8), adsl-stop(8), adsl-connect(8), pppd(8), pppoe.conf(5), pppoe(8), adsl-setup(8), adsl-status(8), pppoe-sniff(8), pppoe-relay(8)


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    OPTIONS
    OPERATION
    AUTHORS
    SEE ALSO


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру