The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

sane-sm3840 (5)
  • >> sane-sm3840 (5) ( Разные man: Форматы файлов )
  •  

    NAME

    sane-sm3840 - SANE backend for Microtek scanners with SCAN08 USB chip
     
    

    DESCRIPTION

    The sane-sm3840 library implements a SANE (Scanner Access Now Easy) backend that provides access to some Microtek scanners with the SCAN08 USB chip.

    There exist backends for Microtek scanners with SCSI command set. Refer to sane-microtek(5) and sane-microtek2(5) for details.

    There also exists a Microtek 3600 series driver, see sane-sm3600(5) for details.

    At present, the following scanners are known positively to work with this backend:

    Vendor     Product ID:     Remark:
    --------   --------------  -----------
    Microtek   ScanMaker 3840  All modes OK
    Microtek   ScanMaker 4800  All modes OK
    

    If you own a Microtek scanner with the SCAN08 chip other than the ones listed above, it may or may not work with SANE. Feel free to contact the backend author ([email protected]) to report results with scanners not on the list.

     

    FRONTEND OPTIONS

    The following options are supported by the sm3840-driver:

    --mode color|gray
    Color or grayscale mode.

    --resolution 150|300|600|1200
    Pixels per inch for scans.

    --depth 8|16
    Note that the least significant bits of 16bpp mode may be noise.

    --brightness 1..4096
    Higher numbers increase brightness of returned image.

    --contrast 0.1..9.9
    Larger numbers decrease contrast of returned image.

    --lamp-timeout 1..15
    Time in minutes until the lamp is turned off after a scan.

     

    CONFIGURATION

    This backend does not support a configuration file right now.

     

    FILES

    /usr/lib/sane/libsane-sm3840.a
    The static library implementing this backend.
    /usr/lib/sane/libsane-sm3840.so
    The shared library implementing this backend (present on systems that support dynamic loading).

     

    ENVIRONMENT

    SANE_DEBUG_SM3840
    If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. E.g., a value of 128 requests all debug output to be printed. Smaller levels reduce verbosity. To see error messages on stderr set SANE_DEBUG_SM3840 to 1.

     

    SEE ALSO

    sane-microtek2(5), sane-sm3600(5), http://www.ziplabel.com/sm3840

     

    AUTHOR


    Earle F. Philhower III ([email protected])


     

    Index

    NAME
    DESCRIPTION
    FRONTEND OPTIONS
    CONFIGURATION
    FILES
    ENVIRONMENT
    SEE ALSO
    AUTHOR


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру