The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

solterm (1)
  • >> solterm (1) ( Linux man: Команды и прикладные программы пользовательского уровня )
  •  

    NAME

    solterm - An IPMI Serial over LAN program
    

     

    SYNOPSIS

    solterm

    <connection parms> [-e escape_char] [-notencrypted] [-notauthenticated] [-bitrate (9600|19200|38400|57600|115200)] [-alerts (succeed|defer|fail)] [-holdoff] [-ack-retries n] [-ack-timeout microseconds] [-v] [-q]  

    DESCRIPTION

    The solterm program allows a user to make a remote serial connection over IPMI. The requires that the remote system support IPMI 2.0 Serial Over LAN.

     

    OPTIONS

    <connection parms>
    The parameters for the connection depend on the connection type. These are all described in openipmi_conparms (7)

    -e escape_char
    The character to use to escape, or exit, the program. Entering this chatacter right after a newline is entered causes the program to go into command mode. A single character after this performs a command. The default escape character is "~" as shown below. Suppported commands are:
    ~.
    Terminate the program
    ~B
    Send a serial BREAK over the connection
    ~F
    Flush all buffers
    ~R
    Assert the Ring Indicator (RI) line
    ~r
    Deassert the Ring Indicator (RI) line
    ~D
    Assert DCD and DSR lines
    ~d
    Deassert DCD and DSR lines
    ~C
    Pause the output using CTS
    ~c
    Put CTS under BMC control
    ~?
    Help on escape commands
    ~~
    Enter the escape character twice to send it.

    -notencrypted
    Do not encrypt the SOL data going over the connection.

    -notauthenticated
    Do not do integrity checks on the SOL data going over the connection.

    -bitrate
    Set the bitrate to the given value. The default is whatever the BMC has set it to.

    -alerts
    This specifies what to do if a alert that requires a callout occurs on the line.
    succeed
    specifies that serial/modem alerts are to succeed while SoL is active.
    deferred
    specifies that serial/modem alerts are to be deferred for the duration of the SoL session.
    fail
    specifies that serial/modem alerts automatically fail during the SoL session. This is the default.

    -holdoff
    Specifies that CTS, DTR, and DSR are to be deasserted at the start of the SoL session so that the configuration may be modifeid before the handshake is released.

    -v
    Be more verbose. Maybe specified multiple time for more output.

    -q
    Be less verbose. Maybe specified multiple time for less output.

     

    SEE ALSO

    openipmi_conparms(7)

     

    KNOWN PROBLEMS

    None

     

    AUTHOR

    Darius Davis <[email protected]>


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    OPTIONS
    SEE ALSO
    KNOWN PROBLEMS
    AUTHOR


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру