The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

stat (1)
  • >> stat (1) ( FreeBSD man: Команды и прикладные программы пользовательского уровня )
  • stat (1) ( Русские man: Команды и прикладные программы пользовательского уровня )
  • stat (1) ( Linux man: Команды и прикладные программы пользовательского уровня )
  • stat (2) ( Solaris man: Системные вызовы )
  • stat (2) ( FreeBSD man: Системные вызовы )
  • stat (2) ( Русские man: Системные вызовы )
  • stat (2) ( Linux man: Системные вызовы )
  • stat (3) ( POSIX man: Библиотечные вызовы )

  • BSD mandoc
     

    NAME

    
    
    stat
    
     
    readlink
    
     - display file status
    
     
    

    SYNOPSIS

    [-FLnq ] [-f format | -l | r | s | x ] [-t timefmt ] [file ... ]
    readlink [-n ] [file ... ]  

    DESCRIPTION

    The utility displays information about the file pointed to by file Read, write or execute permissions of the named file are not required, but all directories listed in the path name leading to the file must be searchable. If no argument is given, displays information about the file descriptor for standard input.

    When invoked as readlink only the target of the symbolic link is printed. If the given argument is not a symbolic link, readlink will print nothing and exit with an error.

    The information displayed is obtained by calling lstat(2) with the given argument and evaluating the returned structure.

    The options are as follows:

    -F
    As in ls(1), display a slash (`/' ) immediately after each pathname that is a directory, an asterisk (`*' ) after each that is executable, an at sign (`@' ) after each symbolic link, a percent sign (`%' ) after each whiteout, an equal sign (`=' ) after each socket, and a vertical bar (`|' ) after each that is a FIFO. The use of -F implies -l
    -L
    Use stat(2) instead of lstat(2). The information reported by will refer to the target of file if file is a symbolic link, and not to file itself.
    -n
    Do not force a newline to appear at the end of each piece of output.
    -q
    Suppress failure messages if calls to stat(2) or lstat(2) fail. When run as readlink error messages are automatically suppressed.
    -f format
    Display information using the specified format. See the Sx FORMATS section for a description of valid formats.
    -l
    Display output in ls -lT format.
    -r
    Display raw information. That is, for all the fields in the Vt stat structure, display the raw, numerical value (for example, times in seconds since the epoch, etc.).
    -s
    Display information in ``shell output'' suitable for initializing variables.
    -x
    Display information in a more verbose way as known from some Linux distributions.
    -t timefmt
    Display timestamps using the specified format. This format is passed directly to strftime(3).

     

    Formats

    Format strings are similar to printf(3) formats in that they start with % are then followed by a sequence of formatting characters, and end in a character that selects the field of the Vt struct stat which is to be formatted. If the % is immediately followed by one of n , t , % or @ then a newline character, a tab character, a percent character, or the current file number is printed, otherwise the string is examined for the following:

    Any of the following optional flags:

    #
    Selects an alternate output form for octal and hexadecimal output. Non-zero octal output will have a leading zero, and non-zero hexadecimal output will have ``0x '' prepended to it.
    +
    Asserts that a sign indicating whether a number is positive or negative should always be printed. Non-negative numbers are not usually printed with a sign.
    -
    Aligns string output to the left of the field, instead of to the right.
    0
    Sets the fill character for left padding to the `0' character, instead of a space.
    space
    Reserves a space at the front of non-negative signed output fields. A `+ ' overrides a space if both are used.

    Then the following fields:

    size
    An optional decimal digit string specifying the minimum field width.
    prec
    An optional precision composed of a decimal point `. ' and a decimal digit string that indicates the maximum string length, the number of digits to appear after the decimal point in floating point output, or the minimum number of digits to appear in numeric output.
    fmt
    An optional output format specifier which is one of D , O , U , X , F or S These represent signed decimal output, octal output, unsigned decimal output, hexadecimal output, floating point output, and string output, respectively. Some output formats do not apply to all fields. Floating point output only applies to Vt timespec fields (the a , m and c fields).

    The special output specifier S may be used to indicate that the output, if applicable, should be in string format. May be used in combination with:

    amc
    Display date in strftime(3) format.
    dr
    Display actual device name.
    gu
    Display group or user name.
    p
    Display the mode of file as in ls -lTd
    N
    Displays the name of file
    T
    Displays the type of file
    Y
    Insert a `` -Gt] '' into the output. Note that the default output format for Y is a string, but if specified explicitly, these four characters are prepended.

    sub
    An optional sub field specifier (high, middle, low). Only applies to the p , d , r and T output formats. It can be one of the following:

    H
    ``High'' [em] specifies the major number for devices from r or d the ``user'' bits for permissions from the string form of p the file ``type'' bits from the numeric forms of p and the long output form of T
    L
    ``Low'' [em] specifies the minor number for devices from r or d the ``other'' bits for permissions from the string form of p the ``user'' ``group'' and ``other'' bits from the numeric forms of p and the ls -F style output character for file type when used with T (the use of L for this is optional).
    M
    ``Middle'' [em] specifies the ``group'' bits for permissions from the string output form of p or the ``suid'' ``sgid'' and ``sticky'' bits for the numeric forms of p

    datum
    A required field specifier, being one of the following:

    d
    Device upon which file resides.
    i
    file 's inode number.
    p
    File type and permissions.
    l
    Number of hard links to file
    u , g
    User ID and group ID of file 's owner.
    r
    Device number for character and block device special files.
    a , m , c , B
    The time file was last accessed or modified, of when the inode was last changed, or the birth time of the inode.
    z
    The size of file in bytes.
    b
    Number of blocks allocated for file
    k
    Optimal file system I/O operation block size.
    f
    User defined flags for file
    v
    Inode generation number.

    The following four field specifiers are not drawn directly from the data in Vt struct stat , but are:

    N
    The name of the file.
    T
    The file type, either as in ls -F or in a more descriptive form if the sub field specifier H is given.
    Y
    The target of a symbolic link.
    Z
    Expands to ``major,minor'' from the rdev field for character or block special devices and gives size output for all others.

    Only the % and the field specifier are required. Most field specifiers default to U as an output form, with the exception of p which defaults to O a , m and c which default to D and Y , T and N which default to S  

    EXIT STATUS

    Ex -std stat readlink  

    EXAMPLES

    Given a symbolic link foo that points from /tmp/foo to / you would use as follows:
    Gt] stat -F /tmp/foo
    lrwxrwxrwx 1 jschauma cs 1 Apr 24 16:37:28 2002 /tmp/foo@ -Gt] /
    
    Gt] stat -LF /tmp/foo
    drwxr-xr-x 16 root wheel 512 Apr 19 10:57:54 2002 /tmp/foo/
    

    To initialize some shell variables, you could use the -s flag as follows:

    Gt] csh
    % eval set `stat -s .cshrc`
    % echo $st_size $st_mtimespec
    1148 1015432481
    
    Gt] sh
    $ eval $(stat -s .profile)
    $ echo $st_size $st_mtimespec
    1148 1015432481
    

    In order to get a list of file types including files pointed to if the file is a symbolic link, you could use the following format:

    $ stat -f "%N: %HT%SY" /tmp/*
    /tmp/bar: Symbolic Link -Gt] /tmp/foo
    /tmp/output25568: Regular File
    /tmp/blah: Directory
    /tmp/foo: Symbolic Link -Gt] /
    

    In order to get a list of the devices, their types and the major and minor device numbers, formatted with tabs and linebreaks, you could use the following format:

    stat -f "Name: %N%n%tType: %HT%n%tMajor: %Hr%n%tMinor: %Lr%n%n" /dev/*
    [...]
    Name: /dev/wt8
            Type: Block Device
            Major: 3
            Minor: 8
    
    Name: /dev/zero
            Type: Character Device
            Major: 2
            Minor: 12
    

    In order to determine the permissions set on a file separately, you could use the following format:

    Gt] stat -f "%Sp -Gt] owner=%SHp group=%SMp other=%SLp" .
    drwxr-xr-x -Gt] owner=rwx group=r-x other=r-x
    

    In order to determine the three files that have been modified most recently, you could use the following format:

    Gt] stat -f "%m%t%Sm %N" /tmp/* | sort -rn | head -3 | cut -f2-
    Apr 25 11:47:00 2002 /tmp/blah
    Apr 25 10:36:34 2002 /tmp/bar
    Apr 24 16:47:35 2002 /tmp/foo
    

    To display a file's modification time:

    Gt] stat -f %m /tmp/foo
    1177697733
    

    To display the same modification time in a readable format:

    Gt] stat -f %Sm /tmp/foo
    Apr 27 11:15:33 2007
    

    To display the same modification time in a readable and sortable format:

    Gt] stat -f %Sm -t %Y%m%d%H%M%S /tmp/foo
    20070427111533
    

    To display the same in UTC:

    Gt] sh
    $ TZ= stat -f %Sm -t %Y%m%d%H%M%S /tmp/foo
    20070427181533
    
     

    SEE ALSO

    file(1), ls(1), lstat(2), readlink(2), stat(2), printf(3), strftime(3)  

    HISTORY

    The utility appeared in Nx 1.6 and Fx 4.10 .  

    AUTHORS

    An -nosplit The utility was written by An Andrew Brown Aq [email protected] . This man page was written by An Jan Schaumann Aq [email protected] .


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    Formats
    EXIT STATUS
    EXAMPLES
    SEE ALSO
    HISTORY
    AUTHORS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру