The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

svgalib.et4000 (7)
  • >> svgalib.et4000 (7) ( Linux man: Макропакеты и соглашения )
  •  

    NAME

    svgalib.et4000, libvga.et4000 - Information for Tseng ET4000 users
    

     

    TABLE OF CONTENTS

    NOTE: The ET4000 register layout changed stepping from svgalib 0.98 to 0.99. See 8. Problems below first

    1. Basics of ET4000 cards
    2. How to configure svgalib(7)
    3. Creating card dependent register values
    4. Defining new modes
    5. Redefining standard modes
    6. Available examples
    7. ET4000/W32 support
    8. Problems
    9. Using dynamic loading with other cards

     

    1. BASICS OF ET4000 CARDS

    Basicly all ET4000 cards are equal, some are even more equal ...

    The Chipset is well documented (by Tseng Labs and eg. the vgadoc2.zip) and all graphics functions can be used the same way on different cards (including the ET4000/W32 based ones). There are three important points to be kept in mind:

    a.)
    amount of available, the organisation and timing of video memory
    b.)
    type and capabilities of the DAC
    c.)
    available oscillator frequencies

    svgalib(7) will check the available video memory during startup. This should work on all DRAM cards. If there are any problems concerning VRAM equipped cards, please tell us about.

    By now we found is no reliable way to detect the memory organisation/ timing and the DAC type/capabilities. Most modern card use a frequency synthizier and provide the following pixel frequencies (in MHz):

    50.350 56.644 65.0 72.0 80.0 89.8 63.0 75.0

    Checking older ET4000 cards we found a wide spread range of available frequencies. Since the video timing is based on the pixel frequency, the required register values are card dependent.

     

    2. HOW TO CONFIGURE SVGALIB


      svgalib(7) has a somewhat 'standard' registers set that may work with modern ET4000 cards. If svgalib(7) fails on your machine or you have a HiColor dac, you need to configure your svgalib(7).
      The svgalib(7) may use hard linked or dynamical linked register values. If you use hard linked values, the binary will be smaller and start up faster but might fail on other machines.

    Compiling the svgalib(7) with DYNAMIC defined (see Makefile.cfg) will set up dynamic register loading. Otherwise the value from svgalib/et4000.regs will be hard linked.

    The dynamic configuration will be read from /etc/vga/libvga.et4000 which is an ASCII file (see Makefile.cfg for exact naming). If you have a working et4000.regs for your system just copy this file to /etc/vga/libvga.et4000 or link /etc/vga/libvga.et4000 to your svgalib/et4000.regs file.

    The actual scanner/parser will handle the following entries:

    #define DAC_TYPE <integer>
    Overwrite the DAC detection
    #define <MODE1> <MODE2>
    Enable MODE1 using MODE2 registers, eg. 64K modes like 32K modes
    #define <MODE> DISABLE_MODE
    do not use MODE (eg. from vgadrv)
    char <MODE><strg>[..] = {<integer>, <integer>, ... };
    register definition

    with

    <MODE> ::= 'g'<decimal>x<decimal>x<color><ignored>
    <integer> ::= <decimal>|<hex>
    <hex> ::= '0x'<hexdigit>{<hexdigit>}
    <decimal> ::= ['+'|'-']<digit>{<digit>}
    <hexdigit>::= <digit>|'a..f'|'A..F'
    <digit> ::= '0..9'
    <color> ::= '2'|'16'|'256'|'32k'|'32K'|'64k'|'64K'|'16M'
    <strg> ::= <empty>|[(<alpha>|'_'){<digit>|<alpha>|'_'}]
    <alpha> ::= 'a..z'|'A..Z'

    C style comments will be skipped. See the et4000/ subdirectory of the svgalib distribution for examples.

     

    3. CREATING CARD DEPENDENT REGISTER VALUES

    You may create a et4000.regs on your own with the tseng3.exe program. This DOS program and its source is included in the svgalib distribution.

    Just boot MS-DOS and start

    tseng3 et4000.reg

    The tseng3.exe will measure the video timing for each available mode. Check the et4000.regs file against your monitor documentation and disable all non conformant modes, eg.

    #define g1024x768x256_regs DISABLE_MODE
    /*
    static unsigned char g1024x768x256_regs[71] = {
    ...
    };
    */

    will disable the 1024x768x256 mode. You mustn't disable the 640x480x256 mode!

    Your et4000.regs must define the following symbols (register values or #define ... DISABLE_MODE) for hard linking:

    g320x200x32K_regs, g640x400x256_regs, g640x480x256_regs, g640x480x32K_regs, g640x480x16M_regs, g800x600x16_regs, g800x600x256_regs, g800x600x32K_regs, g1024x768x16_regs, g1024x768x256_regs, and g1280x1024x16_regs.

    and all 64K modes handled like 32K modes by the driver:

    #define g320x200x64K_regs g320x200x32K_regs
    #define g640x480x64K_regs g640x480x32K_regs
    #define g800x600x64K_regs g800x600x32K_regs

    You may omit every unusable mode in /usr/lib/libvga.et4000.

     

    4. DEFINING NEW MODES

    All standard svgalib(7) modes may be selected by the mode constants defined in #include<vga.h> (eg. G320x200x16). You may define new modes on your own. Just use dynamic register loading and add the register definition of the new mode. Your program may determine the related modenumber by checking the vga_getmodeinfo(1..vga_lastmodenumber()).

    Most ET4000 cards provide 640x350 and 640x400 graphics modes. The tseng3.exe generates the related register sets. You may also use dumpreg(1) from an X window to grab you favourite X graphics mode. The X mode normaly isn't usable directly. See cardex.w32 for an example and et4000.c for a brief description of et4000 registers (both files are included in the svgalib distribution).
        

    5. REDEFINING STANDARD MODES

    Using dynamic register loading you may redefine any standard VGA mode except of TEXT and 640x480x16. Just add the ET4000 specific register set to /etc/vga/et4000.regs.

     

    6. AVAILABLE EXAMPLES

       #include <the>
    et4000/ subdir of teh svgalib distribution you'll find some sample register sets:

    cardex.w32
    Cardex ET4000/W32 card, Music TrueColor DAC
    speedstar+
    SpeedSTAR PLUS card, Normal DAC
    orchid.pdII
    Orchid Prodesigner II

     

    7. ET4000/W32 SUPPORT

    The actual driver seems to be ET4000/W32 compatible. Tell us about any problems (and solutions). If you've got any information about the ET4000/W32 blitter, we would be pleased to receive it.

     

    8. PROBLEMS

    As mentioned before, the DAC detection isn't very reliable. vgatest(6) should print equal screens in 256 color and HiColor/TrueColor modes. You may have to edit your libvga.et4000 register file by hand to setup the correct DAC.

    The tseng3.exe may fail due to incompatible mode numbering. You might use a VESA driver (eg. tlivesa.com from VPIC 6.0) or edit and recompile the tseng3.exe.

    Newer ET4000 chipsets (eg. W32 and W32i) allow up to 32 clock frequencies. Two additional register values were added just before the old extened register value. The new registers are CRTC/30h and CRTC/31h. The old register set had 71 values, the new growed to 73. You may update your old register set by hand:

    -
    run the dumpreg program, remember the first two values from last data line.
    -
    edit your libvga:
    for each mode
    change the number of register values from 71 to 73
    add the values from dumreg output at front of last data line
    -
    run .BR vgatest (6) to check the new register set

     

    9. USING DYNAMIC LOADING WITH OTHER CARDS

    The dynamical register loading may be used in other drivers. Since hard linked register values work fine for Cirrus and Trident cards, we didn't include this feature.

     

    FILES

    /etc/vga/libvga.config
    /etc/vga/libvga.et4000

     

    SEE ALSO

    svgalib(7), libvga.config(5).

     

    AUTHOR

    This documentation for the ET4000 registers was provided by Hartmut Schirmer. However, it was slightly reformatted by Michael Weller <[email protected]>.


     

    Index

    NAME
    TABLE OF CONTENTS
    1. BASICS OF ET4000 CARDS
    2. HOW TO CONFIGURE SVGALIB
    3. CREATING CARD DEPENDENT REGISTER VALUES
    4. DEFINING NEW MODES
    5. REDEFINING STANDARD MODES
    6. AVAILABLE EXAMPLES
    7. ET4000/W32 SUPPORT
    8. PROBLEMS
    9. USING DYNAMIC LOADING WITH OTHER CARDS
    FILES
    SEE ALSO
    AUTHOR


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру