The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

vboxgetty (8)
  • >> vboxgetty (8) ( Linux man: Команды системного администрирования )
  •  

    NAME

    vboxgetty - isdn voice box (getty)
    

     

    SYNOPSIS

    vboxgetty [OPTION] [OPTION] [...]

     

    DESCRIPTION

    Vboxgetty is the heart of vbox: it watches the isdn system and waits for incoming voice calls,

     

    OPTIONS

    -f, --file FILE
    Config file to use. Default is the file '/etc/isdn/vboxgetty.conf'.

    -d, --device TTY
    ISDNdevice to use. You must use this option!

    -h, --help
    Show summary of options.

    -v, --version
    Show version of program.

     

    CONFIGURING VBOX

    vboxgetty should be started from the init process. To do this you need one line per vboxgetty in /etc/inittab like this one:

    I5:2345:respawn:'/usr/sbin'/vboxgetty -d /dev/ttyI5

    The next step is to set up a working configuration for all ports in /etc/isdn/vboxgetty.conf: read vboxgetty.conf(5) how to do this and look at the example config file in /usr/doc/isdnutils/examples.

    You should then create the spool directories for each user: /var/spool/vbox/<user>, /var/spool/vbox/<user>/incoming and /var/spool/vbox/<user>/messages. Copy the example config files vbox.conf and standard.tcl from /usr/doc/isdnutils/examples to /var/spool/vbox/<user>, read the man pages vbox.conf(5) and vboxtcl(5) and edit these config files.

    Change the owner of all files in /var/spool/vbox/<user> with "chown <user>.<group> /var/spool/vbox/<user> -Rv" and correct the permissions with "chmod o-rwx,g-rwx /var/spool/vbox/<user> -Rv".

    The last step: run "init q" to force init to reread /etc/inittab

     

    HOW IT WORKS

    For each line in /etc/inittab one vboxgetty is started by init. Make sure the first field (ID) and the device file are different. Each vboxgetty does this:

    First /etc/isdn/vbox.conf is read, the global settings are loaded and then the port specific settings. Then vboxgetty waits for an incoming call.

    On an incoming call vboxgetty reads /var/spool/vbox/<user>/vbox.conf (unless you change that name), and vboxgetty determines if it should take that call or how many RINGs it should wait. It also gets the name of the standard message, beep message, timeout message, if these should be played and an alias for the current caller, if there is one.

    If vbox has waited enough RINGs and the caller is still ringing, it takes the call and starts the tcl script /var/spool/vbox/<user>/standard.tcl (unless you change that name), and this script will do the rest (normally: play standard and beep message, record and then play timeout message).

     

    FILES

    /etc/isdn/vboxgetty.conf
    default config file

    /etc/inittab
    init starts vboxgetty via this file.

    /etc/isdn/vboxgetty.conf
    the global vbox config file

    /var/spool/vbox/<user>/vbox.conf
    the per user configuration file for this port

    /var/spool/vbox/<user>/standard.tcl
    the tcl script used to communicate with the caller

    /var/run/vboxgetty-<device>.pid
    process id of the vboxgetty

    /var/log/vbox/vboxgetty-<device>.log
    logfile of the vboxgetty

     

    SEE ALSO

    vboxgetty.conf(5), vbox.conf(5), vboxtcl(5), isdntime(5)

     

    AUTHOR

    This manual page was written by Andreas Jellinghaus <[email protected]>, for Debian GNU/Linux and isdn4linux.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    OPTIONS
    CONFIGURING VBOX
    HOW IT WORKS
    FILES
    SEE ALSO
    AUTHOR


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру