The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

xscreensaver-demo (1)
  • >> xscreensaver-demo (1) ( Linux man: Команды и прикладные программы пользовательского уровня )
  •  

    NAME

    xscreensaver-demo - interactively control the background xscreensaver daemon
     
    

    SYNOPSIS

    xscreensaver-demo [-display host:display.screen] [-prefs] [--crapplet] [--debug]  

    DESCRIPTION

    The xscreensaver-demo program is a graphical front-end for setting the parameters used by the background xscreensaver(1) daemon. It is essentially two things: a tool for editing the ~/.xscreensaver file; and a tool for demoing the various graphics hacks that the xscreensaver daemon will launch.

    The main window consists of a menu bar and two tabbed pages. The first page is for editing the list of demos, and the second is for editing various other parameters of the screensaver.  

    MENU COMMANDS

    All of these commands are on either the File or Help menus:
    Blank Screen Now
    Activates the background xscreensaver daemon, which will then run a demo at random. This is the same as running xscreensaver-command(1) with the -activate option.
    Lock Screen Now
    Just like Blank Screen Now, except the screen will be locked as well (even if it is not configured to lock all the time.) This is the same as running xscreensaver-command(1) with the -lock option.
    Kill Daemon
    If the xscreensaver daemon is running on this screen, kill it. This is the same as running xscreensaver-command(1) with the -exit option.
    Restart Daemon
    If the xscreensaver daemon is running on this screen, kill it. Then launch it again. This is the same as doing ``xscreensaver-command -exit'' followed by ``xscreensaver''.

    Note that it is not the same as doing ``xscreensaver-command -restart''.

    Exit
    Exits the xscreensaver-demo program (this program) without affecting the background xscreensaver daemon, if any.
    About...
    Displays the version number of this program, xscreensaver-demo.
    Documentation...
    Opens up a web browser looking at the XScreenSaver web page, where you can find online copies of the xscreensaver(1), xscreensaver-demo(1), and xscreensaver-command(1) manuals.
     

    DISPLAY MODES TAB

    This page contains a list of the names of the various display modes, a preview area, and some fields that let you configure screen saver behavior.
    Mode
    This option menu controls the behavior of the screen saver. The options are:
    Random Screen Saver
    When blanking the screen, select a random display mode from among those that are enabled and applicable. This is the default.
    Only One Screen Saver
    When blanking the screen, only ever use one particular display mode (the one selected in the list.)
    Blank Screen Only
    When blanking the screen, just go black: don't run any graphics hacks.
    Disable Screen Saver
    Don't ever blank the screen, and don't ever allow the monitor to power down.

    Demo List
    Double-clicking in the list on the left will let you try out the indicated demo. The screen will go black, and the program will run in full-screen mode, just as it would if the xscreensaver daemon had launched it. Clicking the mouse again will stop the demo and un-blank the screen, making the dialog box visible again.

    Single-clicking in the list will run it in the small preview pane on the right. (But beware: many of the display modes behave somewhat differently when running in full-screen mode, so the scaled-down view might not give an accurate impression.)

    When Mode is set to Random Screen Saver, each name in the list has a checkbox next to it: this controls whether this display mode is enabled. If it is unchecked, then that mode will not be chosen. (Though you can still run it explicitly by double-clicking on its name.)

    Arrow Buttons
    Beneath the list are a pair of up and down arrows. Clicking on the down arrow will select the next item in the list, and then run it in full-screen mode, just as if you had double-clicked on it. The up arrow goes the other way. This is just a shortcut for trying out all of the display modes in turn.
    Blank After
    After the user has been idle this long, the xscreensaver daemon will blank the screen.
    Cycle After
    jAfter the screensaver has been running for this long, the currently running graphics demo will be killed, and a new one started. If this is 0, then the graphics demo will never be changed: only one demo will run until the screensaver is deactivated by user activity.
    Lock Screen
    When this is checked, the screen will be locked when it activates.
    Lock Screen After
    This controls the length of the ``grace period'' between when the screensaver activates, and when the screen becomes locked. For example, if this is 5 minutes, and Blank After is 10 minutes, then after 10 minutes, the screen would blank. If there was user activity at 12 minutes, no password would be required to un-blank the screen. But, if there was user activity at 15 minutes or later (that is, Lock Screen After minutes after activation) then a password would be required. The default is 0, meaning that if locking is enabled, then a password will be required as soon as the screen blanks.
    Preview
    This button, below the small preview window, runs the demo in full-screen mode so that you can try it out. This is the same thing that happens when you double-click an element in the list. Click the mouse to dismiss the full-screen preview.
    Settings
    This button will pop up a dialog where you can configure settings specific to the display mode selected in the list.
     

    ADVANCED TAB

    This tab lets you change various settings used by the xscreensaver daemon itself, rather than its sub-programs.
    Grab Desktop Images
    Some of the graphics hacks manipulate images. If this option is selected, then they are allowed to manipulate the desktop image, that is, a display mode might draw a picture of your desktop melting, or being distorted in some way. The security-paranoid might want to disable this option, because if it is set, it means that the windows on your desktop will occasionally be visible while your screen is locked. Others will not be able to do anything, but they may be able to see whatever you left on your screen.
    Grab Video Frames
    If your system has a video capture card, selecting this option will allow the image-manipulating modes to capture a frame of video to operate on.
    Choose Random Image
    If this option is set, then the image-manipulating modes will select a random image file from disk, from the directory you specify in the text entry field. That directory will be recursively searched for files, and it is assumed that all the files under that directory are images.

    If more than one of these options are selected, then one will be chosen at random. If none of them are selected, then an image of video colorbars will be used instead.

    (All three of these options work by invoking the xscreensaver-getimage(1) program, which is what actually does the work.)

    Verbose Diagnostics
    Whether to print lots of debugging information.
    Display Subprocess Errors
    If this is set, then if one of the graphics demos prints something to stdout or stderr, it will show up on the screen immediately (instead of being lost in a hidden terminal or file that you can't see.)

    If you change this option, it will only take effect the next time the xscreensaver daemon is restarted. (All other settings take effect immediately.)

    Display Splash Screen at Startup
    Normally when xscreensaver starts up, it briefly displays a splash dialog showing the version number, a Help button, etc. If this option is turned off, the splash screen will not be shown at all.
    Power Management Enabled
    Whether the monitor should be powered down after a period of inactivity.

    If this option is grayed out, it means your X server does not support the XDPMS extension, and so control over the monitor's power state is not available.

    If you're using a laptop, don't be surprised if this has no effect: many laptops have monitor power-saving behavior built in at a very low level that is invisible to Unix and X. On such systems, you can typically only adjust the power-saving delays by changing settings in the BIOS in some hardware-specific way.

    Standby After
    If Power Management Enabled is selected, the monitor will go black after this much idle time. (Graphics demos will stop running, also.)
    Suspend After
    If Power Management Enabled is selected, the monitor will go into power-saving mode after this much idle time. This duration should be greater than or equal to Standby.
    Off After
    If Power Management Enabled is selected, the monitor will fully power down after this much idle time. This duration should be greater than or equal to Suspend.
    Install Colormap
    Whether to install a private colormap while the screensaver is active, so that the graphics hacks can get as many colors as possible. (This only applies when the screen's default visual is being used, since non-default visuals get their own colormaps automatically.) This can also be overridden on a per-demo basis.
    Fade To Black When Blanking
    If selected, then when the screensaver activates, the current contents of the screen will fade to black instead of simply winking out. (Note: this doesn't work with all X servers.) A fade will also be done when switching graphics hacks (when the Cycle After expires.)
    Unfade From Black When Unblanking
    The complement to Fade Colormap: if selected, then when the screensaver deactivates, the original contents of the screen will fade in from black instead of appearing immediately. This is only done if Fade Colormap is also selected.
    Fade Duration
    When fading or unfading are selected, this controls how long the fade will take.

    There are more settings than these available, but these are the most commonly used ones; see the manual for xscreensaver(1) for other parameters that can be set by editing the ~/.xscreensaver file, or the X resource database.  

    SETTINGS DIALOG

    When you click on the Settings button on the Display Modes tab, a configuration dialog will pop up that lets you customize settings of the selected display mode. Each display mode has its own custom configuration controls on the left side.

    On the right side is a paragraph or two describing the display mode. Below that is a Documentation button that will display the display mode's manual page, if it has one, in a new window (since each of the display modes is actually a separate program, they each may have their own manual.)

    The Advanced button reconfigures the dialog box so that you can edit the display mode's command line directly, instead of using the graphical controls. It also lets you configure the X visual type that this mode will require. If you specify one (other than Any) then the program will only be run on that kind of visual. For example, you can specify that a particular program should only be run if color is available, and another should only be run in monochrome. See the discussion of the programs parameter in the Configuration section of the xscreensaver(1) manual.  

    COMMAND-LINE OPTIONS

    xscreensaver-demo accepts the following command line options.
    -display host:display.screen
    The X display to use. The xscreensaver-demo program will open its window on that display, and also control the xscreensaver daemon that is managing that same display.
    -prefs
    Start up with the Advanced tab selected by default instead of the Display Modes tab.
    -crapplet
    For use by the Gnome Control Center code: this causes this program to be embedded inside the Control Center window.
    -debug
    Causes lots of diagnostics to be printed on stderr. It is important that the xscreensaver and xscreensaver-demo processes be running on the same machine, or at least, on two machines that share a file system. When xscreensaver-demo writes a new version of the ~/.xscreensaver file, it's important that the xscreensaver see that same file. If the two processes are seeing different ~/.xscreensaver files, things will malfunction.
     

    ENVIRONMENT

    DISPLAY
    to get the default host and display number.
    PATH
    to find the sub-programs to run. However, note that the sub-programs are actually launched by the xscreensaver daemon, not by xscreensaver-demo itself. So, what matters is what $PATH the xscreensaver program sees.
    HOME
    for the directory in which to read and write the .xscreensaver file.
    XENVIRONMENT
    to get the name of a resource file that overrides the global resources stored in the RESOURCE_MANAGER property.
     

    UPGRADES

    The latest version can always be found at http://www.jwz.org/xscreensaver/  

    SEE ALSO

    X(1), xscreensaver(1), xscreensaver-command(1), xscreensaver-getimage(1)  

    COPYRIGHT

    Copyright © 1992, 1993, 1997, 1998, 1999, 2000, 2001 by Jamie Zawinski. Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation. No representations are made about the suitability of this software for any purpose. It is provided "as is" without express or implied warranty.  

    AUTHOR

    Jamie Zawinski <[email protected]>, 13-aug-92.

    Please let me know if you find any bugs or make any improvements.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    MENU COMMANDS
    DISPLAY MODES TAB
    ADVANCED TAB
    SETTINGS DIALOG
    COMMAND-LINE OPTIONS
    ENVIRONMENT
    UPGRADES
    SEE ALSO
    COPYRIGHT
    AUTHOR


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру